HERCULINER Roll-On Truck Bed Liner, 1 Gallon Can, Black, Textured, Suitable for All Truck Beds, 55-60 sq ft Coverage

Product went on very easy worked great 1 gallon is plenty for a pick up utility truck two coats. Just make sure you prep it real good sand everything down and brush and go over the entire area with paint thinner before you paint it so it sticks real well.

Great stuff. I used it to cover the bottom of my leaking fiberglass canoe. No more leaks! It held up well. Highly recommended.

Great product. This was very easy to install. I have a long bed and one gallon did my truck just fine. I bought a second due to other reviews but never ended up needing it.

I am reluctant to give it a five star yet, I need to see how it does through the winter. We have a balcony on our house that originally was coded with rhino liner spray on bed liner 20 years ago. Now, we allowed that rhino liner to not have a new coat put on for too many years so we are struggling with water actually getting through and doing a little bit of damage to the OSB underneath. I have tried so many different commercial paint products made for decking, they never work. I’ve also tried the roll-on sealant that are sort of like a rubberized coating, they also do not work. They just can’t take traffic. So I now I’m trying this black roll on truck bed liner, hoping the durability will be better. The coverage was basically what the can said it would do, although I put on a lot more than it recommended. I just am really tired of doing this project! durability is still the question, we will see how it looks next spring. I did this last spring. It survived our ridiculously hot summers, but let’s see how it does with Snow now. It was extremely easy to install, I just used 8 inch rollers with a very thick fluffy cover on them. I would pour the stuff onto the deck and then just roll it back-and-forth, working in maybe 10 square-foot areas at a time. so I would say the ease of use was very good. Coverage was good. It looks fantastic, it’s black matte finish, it has a very coarse feel to it which is good because I don’t want people slipping out here when it’s wet. I’m just hoping a year from now I’ll still be happy with it. Make sure you really clean the surface well before you use this!

This was a lot more work than i first thought it would be, but it was all worth it in the end. The liner makes the bed look sharp and covered the paint damage left by the old plastic liner. After running out of material on my second coat there were still some spots where I could see the red paint below the liner coating. I was doing a 5' bed on a small truck (Chevy Colorado 2005). manufacturer says 1 gallon does a 6 ft normal bed. I would suggest getting more material than recommended if you want to make sure the pain color is completely hidden by the liner coating. Still, I'm absolutely happy with the end result. It's just the OCD within me that wants every speck of red covered. So far, it's holding up good. a bit did rub off the tailgate because I had a ladder wedged in there pretty tight, but overall, it seems quite durable. Another benefit is that toolboxes and such tend to stay where you put them in the bed. the liner helps things stay in place. Nice when driving but can be frustrating when trying to pull things out. Beware when masking off areas for the painting. the rollers love to throw the material. I started with minimal masking thinking this would be enough. the paint flips everywhere as you roll, so I had to add a lot more paper and tape to make sure the liner only ended up where I wanted it. Other than that, I followed the instructions provided and the project turned out great.

More than enough to do a full size truck bed. Applied easy

Having used this product in the past, I can tell you with certainty it is not the same formula as it once was. The consistency is that of water or thinner if that’s even possible, and the amount of shredded rubber, or whatever the material is, is severely lacking. The prior product I used went on thick with one coat coverage this particular gallon was so thin it runs off the vertical surfaces and puddles at the bottom. From what I am noticing at this point, it’s going to take 2 gallons to get the same coverage and effect 1 gallon of the older product provided. Not that it matters to the manufacturer of the seller, but I am quite dissatisfied. I hope this review helps somebody looking to purchase this product make an informed decision.

Easy to apply and works well.

Very happy with the product, lots of preparation needed. Stands up really well.

Superior product and non-skid for keeping loads intact in truck bed. Easy to apply and cure time in 24 hours complete, used on my new aluminum truck bed. Always excellent products from JB Weld!

bedliner worked great they send roller and brusk which was nice one gallon did two coats on my standard box happy so far

Seemed to take product a long time to cure 4 days b4 it seem to lose its soft textured. I’m Loki g forward to see if it is robust when loading my atv trailer with cut wood.

Great Product. Bediner is very easy to install. Prep work takes more time. I would recommend this product for sure.