Chunzehui F-1011 6-Position 45A Power Pole Distribution Block Module, Connect...

As one of the last remaining ham radio operators who had not converted to Power Poles I decided to go ahead and take the plunge. I'm glad I did. I still use an older power supply that does not have Power Poles and this makes connecting different equipment a pleasure. I mounted this to the wall behind my power supply and can not easily connect / disconnect equipment when needed without having to bother with the screw posts any more. This is a solidly built piece of gear and works exactly as intended and I'm sure will last a very long time.

This is a great value for what it is. This is a simple but sturdy distribution block and easy to mount and connectors hold very well.

Great value. Metal case is great. Density is good. Small foot print. Only negative is you cant use a locking insert that APP and WM sell. but not a big deal or deal breaker for me. I've used a couple of these and 2 other styles of APP blocks from Chunzehui . I opened them all, and think they are well made. The mates they come with aren't the real APP, but sooo close, you have to look real hard to tell they arent. I have real APP connectors, and they fit perfect in to these blocks. To me, to make one of these perfect, I added a set of flying leads to one with an APP on the end, so it plugs into the fused Chunzehui block and I have all six ports available. I also added a reverse polarity protection, and as with the flying leads I hardwired a LED (green good 12v, red backwards 12v). Didnt take much and works great for the accessory power (low power stuff) for the odds and ends on the radio shelf. Chunzehui , would love for you guys to make an protection block like WM makes. Theirs is very good, just pricey. I would believe Chunzehui can do it for 1/2 the price. Every Radio shack working of of an AC-DC power supply and or battery back up should have one. OV protection and low voltage disconnect all on one.

This DC distribution block is very well made. The enclosure is solid and each PowerPole (or equivalent, couldn't tell the difference if it was from another manufacturer) was installed perfectly with the contacts all the way nested to the end of each connector. Voltage input to connector 1 dropped 0.1V at connector 6 with a 12A load. Normally I would build a DC distribution block myself but the price was right and time was a factor. I don't think I will be DIY distribution blocks going forward.

Works perfectly in my mobile.

Good product but hard to assemble powerpole connectors. Use a different style connector is my advice..

I bought one, it's been in service for quite a while. Now I need another one and Chunzehui will fit the bill! Being the curious type and very willing to modify things, I've had this one apart to check it out. All six PP are in parallel so I am currently using one set of connectors as my power input and the other five as outputs. I agree with other reviewers, it's tightly packed in there, not much room for mod's, but I think I could possibly fit a set leads into it to free up one set of connectors for use as an output and drive the flying leads with my power supply. Also I think I could insert an red/green led in the circuit for polarity indication.

I used this to retrofit the output from my 50A power supply from two screw posts (not even binding posts) to PowerPole. It has an integrated fuse and over current protection, so I didn't require the one with fuses in it. I have another distribution block from Chunzehui that is fused and it has worked great so I went for the same brand here. I opened it up to check the build quality and it's all heavy gauge solid copper wire and well mounted.

This item was delivered very quickly from China. Have already installed the power pole distribution block in my radio shack and distributes power to three radios from the one 25A power supply. Is small and light and would not transmit on more than one radio at a time.

Seht guter Powerpole Verteiler. Mit einem 4 zu 1 Kabel (zugegeben sehr günstig - Alu Kabel???) hatte ich Probleme mit zu hohem Spannungsabfall bei hoher Leistung. Hiermit ist mit mein Funkgerät bisher nie wieder aus gegangen, weil die Spannung zu stark eingebrochen wäre plus es bleiben noch genug Abgänge für andere Sachen wie Ladegerät oder KFZ 12 V Adapter.

I use this for my radio gear. It’s simple and I can’t see it failing any time soon. Note that you will need to screw it down to a base.

'PowerPole' connectors don't quite mate as well with the North American connectors. Distribution unit fit well in vehicle and after only a week, all is well.

Rugged and useful for organizing the 13.8 V circuits in my Ham station.