Thompson Center MuzzCharger Black Powder Speed Loader with Fast Single-Stroke Loading Action for Hunting Shooting Range and Sport

It works like it is designed. If you are like me and don’t always read the directions carefully I’ll give you a tip. Make sure it is in the barrel before you rotate the tubes. I thought you had to raise and lower the handle to start the reloading but no! As soon as the tube is rotated it drops powder then you use handle to start sabot. Also although it has 4 tubes you can only have 3 loaded at one time because the charging handle rod stays in one tube. You can also use the whole unit as a palm saver for your ramrod. The only negatives I’ve found so far is depending on the type and brand of loose black powder the measurements can be slightly off. No big deal for me as I only use 100 gr and my muzzleloader can shoot 150. It would be an issue if you maxing out your firearm however. I always measure before loading the tubes anyway and don’t solely rely on marking. The other thing is the tool for removing stuck 209 primers..... it’s ironically stuck as well 🤔 at least on mine I had to use pliers the first time to remove it. It has a little tab that your supposed to depress however it was really stuck. This may be an issue with just mine tho because I haven’t seen anyone else mention in the reviews. If you get it out tho it’s useful not for it’s intended purpose but the bent end will remove the breech plug on a break action. This is on mine and I can’t verify if it works on any other model. The plug is supposed to be able to remove with your hand but does stick from time to time. In the woods it is a great thing to have a tool that will aid in the removal if needed. Although if it don’t loosen up I may need a tool to remove the tool to remove the breech plug. My last grip is even before loaded it is heavy. It does take the place of many other tools tho and should even out in weight such as a ball starter you can remove from your bag and so on. It also saves much time searching for several individual tools to reload because it’s all together. The only thing you need to get another shot off is your ramrod. Even with a few grips in glad I bought it and would have got it sooner if I had known the time it would save me. I hope this helps someone who like I was on the fence if you should purchase. Happy hunting!

This works great with the Federal Copper Sabots I use in my TC Encore . I do not use it to push the sabot down. I pour the powder and bullet down and then use the rifle's ramrod to push the sabot down. Because I use Blackhorn 209 I don't have a hard time pushing rounds down the muzzle so I don't need to pre-load push it.*** Make sure the rubber cap is on when rotating the chambers because I did so without it on and powder spilled everywhere!!! Lesson learned. ***

well made and easy to use

Great product. Built very well. Though I do have a bit of trouble hettingnmy power belts in the tubes. I have to load them from the bottom of the cylinder and sometimes they just wont go. Sabots work alright, but power belts arent super compatible for me. Just too tight from the top. Solid other than that.

Nice to have all newded items to reload in one tool, just a little pricey.

everybody who hunts muzz . should have this .. works great , quick to reload .. well worth having while hunting

I USE THIS WITH BLACKHORN 209 AND BARNES 290GR.BULLET.HELPS ME RELOAD IN HALF THETIME OF ANY OTHER ROADER I'VE TRIED.GREAT PRODUCT. TRYIT.YOU ONLY GO AROUND ONCE!!!!

I have 4 and love them.

Made tuff, I have had a few different makes of these speed loaders an this one is by far built with great quality an built to last..

produit fantastique