M MINGLE Garden Hose Quick Connect Fittings, 3/4” GHT, Solid Brass, 2-Pack | For Standard Garden Hose, Faucet and Sprayer Connections, Check 3/4 Inch GHT Fit Before Use

Excellent quality. No leaking.

Works great. I got these because I couldn't find one of the ends of my other set of brass quick connect hose fittings I had from before, and luckily these are an exact match, so I'm able to recover the usage of my one hose that has had its aluminum fitting galvanically welded to it. Quick note to any readers: You would do well to acquire plastic quick connect hose fittings. They're at least 5x cheaper, offer more features (they have an internal valve with an o-ring in it that shuts off the hose if you switch it on without anything connected) and free you from worries of corrosion. It's much better because even if they break after a season or two that beats your metal fittings welding themselves onto your equipment after just a few weeks. It is no fault of the brass fittings themselves, but the industry wide trend of adopting aluminum material for hose ends is doing an incredible amount of damage to the utility of perfectly high quality brass fittings. Do understand that they will weld together if you leave them wet together for more than a few days, and then you will never be able to separate them again.

Hubby always needs quick release connect fittings. He even has replaced them at our Airbnb.

very easy to use and to install just snap on and use love it

I wish the water would not come out after disconnecting without turning the water off.

... makes life easier in the garden

This is cheap junk. You can feel it the instant you pick it up, that it's lighter than the usual disconnect. When you look at the threads at the male end of the connectors, the threads are "serrated", which (when I examined them closely) looks like the serrations were caused by the knurling process during manufacture, because they were saving on weight and skimping on metal. The machining is also poor in the sense that the wall thickness of the metal on one side of the male threaded end is thinner than on the other side, so it's out-of-round. The female end leaks because the threads are skimpy and fit too loosely to properly engage a standard garden hose fitting, so you have to use lots of white teflon tape to keep it from leaking. Mine leaked even with the teflon tape, but you can stop that by adding a second rubber washer (see below). The female ends of mine were not compatible with older quick-connect male ends I already had, so you may find that the male ends of this set work only with this set, so your hose nozzles already fitted with older, other-brand male ends, can't be interchanged. The normal quick disconnect has two rubber washers inside, one that is part of the internal seal of the disconnect, and another replaceable one between the female end of the connector and the male end of the garden hose. This product has only one washer for both purposes, so you can't replace that rubber washer when it wears out. Another Amazon reviewer who had leaking problems with the female end discovered that you can add an additional rubber hose washer to stop the leaking I complained of above. I tried that and it does work, so you can add a second rubber washer to solve both the wear-out and leaking problems. I waited until I had enough time in use before reviewing this product. In that time, I've had nothing but frustration until I ultimately trashed it (them) and bought a quality product from a local hardware store to replace them.

Very satisfied with this purchase! Excellent quality—fits snuggly on the faucet with no leaking between faucet and garden hose. Makes disconnecting the hose effortless! Highly recommend!

En ocasiones requiere agregar un segundo orring, pues si es muy delgado no puedes desbloquearlo

Don't waste your money . Leeks from the Quick Connect really bad

Well made product

Good work well

good quality bit expensive