Osmo Polyx-Oil - 3043 Clear Satin - .125 Liter

I'm a lazy type so have used a range of poly type finishes and those are ok. Wanted to up the game by getting a nicer finish and this has had good video reviews. This is much nicer than the water based polys I had been using!This applies even and coverage good combined with well sanded pieces. Sanded to 220-320G is about right. This has a slight yellow tint so it makes the wood warmer looking. I use a 5cc syringe to place drops on the surface of my small pieces then rub cross grain using a cotton cloth. That 5cc of this has been enough to cover about a 12x12" area easily depending how dry the wood is. After the first coat, a light sanding with 600 or 1000G to catch any risers-dust that may have become stuck during the process.This small can will go a long way with my projects. The purple heart I put this on is really beautiful following. Have also had it an birdseye maple, curly maple, walnut, cherry with excellent results. On a few cherry pieces it was blotchy but that's part of working with cherry. Does not take a lot to achieve nice results either.

I watched a YouTube video of a young man (Matt Estlea) from England (?) , an English accent I think. He used a unique way to apply the Osmo, a non-abrasive pad. It worked GREAT! Allowed for very thin coats which is key to applying this product and ASLO this application method really and I mean REALLY stretched the product out. According to the coverage on the can I was going to have enough for two coats with just a little leftover. Using this young man’s method, I barely used a quarter / half inch of the can.The end result is BEAUTIFUL….it looks very natural. I’m so happy I found this product.

using it on turned bowls.....very nice although insanely expensive

You'll find the same opinion all over the internet: the simplest thing in the world to apply, with a beautiful finish that lets the wood shine through.This is a small amount, true. But it's more than enough for a good-sized table.It's definitely durable, but if it is marred, repairing the finish is a simple as applying it in the first place.

Can is small but works well. Easy to apply.

everything you want in a finish; easy to apply, looks great, even smells pleasant............crazy expensive

Used this to finish a white oak table. It was relatively easy to apply. I used white scrubbing pads cut to 1.5” squares to work it into the wood with a circular motion. I wiped it off with a lint free cloth. Make sure you wipe it down until it is no longer tacky. Working in sections, only leave it on about 15 minutes. 2 coats is usually enough. I like to wear latex gloves while applying, to protect my hands as it is sticky. It is a penetrating finish that hardens/strengthens the top layer of wood fibers. It is not a finish that sits on the wood, like a varnish. It leaves the wood looking more natural than a urethane or varnish. It is very beautiful!

Good stuff! My woodworker buddy pointed me to this, and it did not disappoint. Two coats and the coffee table looks better than new now!

I used this on the black walnut coffee table I made seen above, used a sponge brush to apply and then a white(less abrasive) scrubbing pad to work the oil in