XT60 Connectors Female Male with 12awg 5.9inch Wire Functional Wire Cover ( 3 Fmale + 3 Male )

These are absolutely great. The wires are 12 gauge with good and thick insulation. The connectors are stout and the electrical contacts are brass. Really a superior product.

I have used all 6 of these and just received another 6 more... I took these apart to check the solder job and all were good !!! The 12 ga. silicone wire is of excellent quality and nicely flexible. Don't settle for the inferior products which use 14 ga wire. Get these.. you will be pleased !! Steve Out !!

I soldered this XT60 connector to an IC3 connector so I can plug the XT60 to my HiTec charger and the IC3 to my Lipo battery for charging. I originally ordered the wrong XT60. What looks like a male end is actually listed as a female. So, I ordered this combination of 3 male and 3 female. And it works.

ok

The cables do indeed cable. Was able to solder one end to a PCB and repeatedly connect / disconnect the other. I only draw ~10A through mine. Have had zero issues so far.

Real deal connectors; used these to complete my charger/Para board combo and they are the genuine article.

For power projects, these are well made compact connectors using large gauge copper wire and soldered precisely. The solder point cover protects the final connection from shorting.

Wires are huge. Wasn't able to use them on my drones there too big to connect to my fc and my esc.

I was hesitant about buying these type of connectors after reading they were very difficult to pull apart and I needed something easy to swap ebike batteries around. These pull apart easily and seem very good quality.

Fonctionnel

Good quality non reversible connector,used to make a removable extension lead for my battery charger. The cables were larger in csa then I needed so they were trimmed a little to make the connection to the extention cables

As described

Have used different makes of xt60 connectors and theses are the best so far ! Good quality cables and connectors