Ergohuman Eurotech ME7ERG GEN2 High Back Mesh Office Chair with Tilt Tension Control, Tilt Lock, Back Angle, Back Height, Synchro Tilt, Seat Height, Seat Depth, and Arm Height Adjustments, Black

Worth the price. The genuine Eurotech chairs are high quality and noticeably superior to the copies on the market. I am 6 foot 4 inches tall, 270 pounds, and the chair can be adjusted to fit me perfectly. It also can be adjusted to fit a user barely 5 feet tall. The chairs are solid and supportive, and you can feel the quality. I previously had a prior version of this chair for 15 years and it never failed me (except for one warrantee hydraulic cylinder replacement, which was also a simple process). I sold the chair and it is still going strong for the new owner. Most importantly, unlike with cheap office chairs, I can sit all day comfortably with no back soreness. The lumbar support is great. It takes about 10 minutes to assemble - just snap the casters in the base, place the hydraulic cylinder in the base, put the seat on the hydraulic cylinder, slide the head rest into the seat back, then use 2 supplied cap screws with the supplied wrench for each arm rest to the seat, and finally 4 cap screws to secure the back to the seat. Assembly note - quality is heavy - might need help if you can't lift 25-30 pounds. After that, have some fun playing with the insane number of ways you can adjust the chair for your individual comfort. I'm not paid and not a bot - just a happy customer for decades.

I purchased this chair in May of 2012. As someone who works from home at a PC for untold hours each month, the investment has been more than justified by the comfort and adjustability of this chair. I did encounter a significant failure but it was immediately remedied by the Eurotech company, as explained below! I am 6'2" and I find that it raises just high enough -- both height from the ground and height from seat to headrest. The mesh material is shockingly durable...I've been in this chair for thousands of hours and it has yet to show any signs of wear (3 years x 300 days (conservatively) x 6 hours per day (conservatively) = 5400). Rather amazing. Another reviewer mentioned that they'd prefer the seat to tilt up and down. I totally agree. That would alleviate stress points for many people, though personally I've made it irrelevant by purchasing a 'Geek Desk' which raises from a sitting to a standing height. I also wish that the lumbar support was more aggressive...for the past few years I've had an additional lumbar pillow on the chair, which causes me zero difficulty and results in a near-perfect sitting experience. The real reason I'm leaving this review is to praise Eurotech's warranty and customer service. After a crazy amount of using this chair, I one day found that it was locked all the way 'back', which is to say that I could not tilt it forward. I tried everything I could think of...tightening/loosening bolts, using WD-40 on key joints, etc. etc. Ultimately, I filled out a simple form with Eurotech including a PDF file of my original purchase. Within 10 hours a representative replied and said that no, I couldn't service it myself (as I'd hoped), but that yes, they would replace it. I needed a new 'Seat and Mech' in their parlance, which meant literally an entire new mesh seat with all of the attached mechanisms...it probably weighed 20 pounds, accounted for 1/3 to 1/2 the price of the entire chair's design, and yet they shipped it to me in a few days with ZERO cost for S&H or anything else. Truly an unparalleled customer-service experience. I bought this product with a 'Lifetime Warranty', it broke, and they fulfilled the warranty once I proved my original purchase. It shouldn't be revolutionary, but I've gotta say...it was a refreshing experience to get a brand new piece of pricy equipment with virtually no hoops to jump through. I could comment on every single aspect of this chair, so if you have a burning question please leave it below and I'll reply. All in all, I love this product and am even more enamored with their customer service.

I looked at purchasing a more expensive chair and did try out some models that I felt would accommodate my size. I am 6'5 with a 35" inseam, and 235 lbs. Most chairs are designed with average build and when looking at big and tall chairs, they tend to lean on the big with over sized seat and wider dimensions than practical for taller people. I think I had read every review on Amazon about the chair and felt this model would likely fit my dimensions. I did not go and sit in the chair because the nearest distributor that I could find was in Austin, TX. which is about a 10 hour round trip. One reviewer mentioned that you should go and sit in the chair for fit and finish and I can't over emphasize how true the recommendation. Pros: 1. Comfortable to sit in for extended hours. Can adjust to fit most body sizes, although I don't have any medical issues such as i.e, bad back, or nerve issues. Was able to adjust to be somewhat comfortable, however not a perfect fit. 2. Fairly easy to assemble, the controls are ingenuous in design, therefore you are not searching for the control lever needed to make an adjustment. Solid construction and materials appear to be of good quality. Cons: 1. The arms are slightly too wide apart. They do angle to accommodate, but I find my arms are not resting at a natural angle. The detente in the arms should require more pressure to move as stated in other reviews. I accidentally move them when sitting, minor annoyance. 2. The seat does slide forward and back to give proper support to your thigh, but when moved fully forward you end up sitting on the hard edge on the frame on aft section of the seat. I do keep the seat as far forward as possible without hitting the frame, but that still leaves an 4 - 6" gap from the back of my knee to the edge of the chair which should be less than 1-3 " according to most ergonomic statements. For me I do need a longer seat or at least goes further back. However, the chair height is perfect, fully raised I am at the idea position for sitting at the desk which is raised for my height. 3. One component with other chairs that I wish this one had, is the ability for the seat to move as you tilt back or forward to keep good posture. 4. The mesh on the chair is somewhat tacky / sticky (for lack of a better word) when new, but get better as you break-in the chair. Conclusion: The chair is not a panacea for all, but has compromises that make it a good mid range chair for most. Overall, I am pleased with the purchase considering design, comfort and price point.

I think 4.5/5.0 stars is about right in terms of overall quality. Some of the construction material is suspect in terms of quality but there is a lifetime warranty from Ergohuman (*crosses fingers* "please don't go out of business--PLEASE!!!"). First, I've owned this chair for all of about 35 minutes now. It takes about 15 minutes to assemble (including unpacking time). The only tool you really need, I believe is a 5 or 5.5mm hex wrench and if you have either a drill-bit or socket attachment for it--highly recommend. Obviously you wanna take it easy when you're finally getting the bolts (only 6 (in 3 pairs) are used for complete assembly and it comes with a spare for each type) to be properly seated. - Pro: The extra hardware included but it arouses suspicions as to why they included it...no faith in integrity of the design??? But it's there--so there's that and I'm happy about it because if I need it--it'll be nice to have on-hand but if I do end up needing it, for the $600+ price tag, I am not going to be a satisfied consumer. - Pro: immediately-noticeable comfort - arm rests have yaw adjustment range and vertical height adjustment range - lumbar support has vertical adjustment range along with tilt/pitch adjustment - seat has depth adjustment range along with tilt/pitch control and standard vertical height adjustment - headrest has vertical adjustment range and tilt/pitch control as well. - SUMMARY--this thing WILL let you find your sweet spot in terms of comfortably-supported posture - Pro: LIFETIME WARRANTY, this is prolly what justifies the $600+ price tag. - Con: the casters are 100% plastic except the pivot shaft...which is kinda like "seriously?" for $600+ USD and complete plastic? I know it's standard fare for the wheels to be some kinda plastic but even the mount assembly? I have suspicions about the durability of this product, right out of the box. - Con: the arm covers, it's the typical foam that has a surface treatment to operate like a jacket but it's all one piece. My concern is that the support frame, which the arm rest covers, doesn't support it that well going forward. I know people tend to use the arm rests to kind of lift themselves into standing when leaving the seated position so I definitely see that causing advanced wear and suffering inevitable breakage just do to the inadequate support, I would say the internal support frame supports 85% of the arm rest cover with 2% hanging off the rear, negligible and understandable, and about 13% ish unsupported toward the very front tip. I've seen lots of office chairs with worn arm rests. Iunno what to even think about that. Like nobody has come up with an intelligent design to defeat the majority of wear in that area? Anyway, so far I am enjoying it and I hope it will support my posture proper 'cause I just started going to school full-time online (hence purchase). I hope this helps you guys in terms of what to expect with the purchase.

I have tried several different chairs including the Herman Miller Aeron chair and out of them all this is by far the most comfortable one I have used. I have a ruptured disc between L4-L5 and this is the only office chair that I have found so far that allows me to work a full 8+ hour day without having back pain. I don't like to spend this sort of money on a chair but in the end I'm very glad that I did. If you have lower back problems I highly recommend this chair. UPDATE. I have now been using this chair for about 1 year and 3 months and I've had ZERO problems with this chair and I'm still every bit as happy with it today as I was the day I wrote my original review. I still think the price is a bit high for an office chair, but it seems that is the norm these days. The ergonomics of this chair are excellent, the mesh keeps you cool all day and it still looks good as new. Even with the high price I highly recommend this chair, for me it was an excellent purchase! UPDATE: I've now been using this chair daily for 10-14 hours per day (small business owner) for over 5 years and I'm still just as happy with it as I was the day I bought it. Nothing is broken, nothing has worn out, it's still think it's very comfortable and although it's starting to show signs of use (mostly just scratches from me being careless) it still looks great. Due to expansion of my business, I'm now in the market for more office chairs and for my personal office chair I'm buying another one of these chairs. I actually wanted to buy the newer updated Ergo Elite Chair because the arms are adjustable width wise which these are not, and the arms tilt with the back and these do not, but the Elite is not as wide as the original so I'm sticking with the original. UPDATE: Nearly 10 years of daily use and still no problems.

The armrest wiggle around so badly and the height adjustment for them is so cheap. There is no latch or button to lock them in place. If you decide that you want the armrest just a tad lower, you have to raise them all the way up to go all the way down before you can try to adjust the height again. The seat is very shallow. So much so that most of your legs are not supported at all, causing pain in my legs from the barstool like support for them. If I can't find a reason soon to keep it, this damn thing is going back. 9/18/2020 - After owning this chair for 3 months, the bolts have started to sheer in half and fall out. Leaving half of the bolt stuck in the chair. The warranty does not cover Shipping or, get this, the labor for making the repairs. DO NOT BUY THIS CHAIR! 10/02/2020 The arms have started to break off of the chair. This is $30 chair sold for $700.

I've been using this chair for several weeks now and find it very comfortable with a plethora of nice adjustments always at the ready. It's extremely well designed and the quality of the materials and build is superb. Very glad I purchased it. Was hesitant at first about the price point but as the saying goes "You get what you pay for". Would definitely buy again :-)

The chair was fairly easy to assemble, took me 15 minutes. The chair at first is stiff but does seem to loosen up over a few days/weeks. One of the items I did not like, is the chair generally feels cheap. Lots of items on it are loose and nothing you can do to fix. The arm rests are adjustable but they move so easily it annoying. I am 250 lbs and after a few weeks my behind would get numb from sitting on it after 2 hours. I could not adjust the tension on the recline to keep it from going all the way back, even at maximum where I could not spin the dial anymore. Not sure if the tension is a general problem or if it was just on my chair. I really enjoyed the back rest and absolutely loved the head rest. You do get a lot of features for the money, just hated how cheap it felt for the price. I think if you are less than 200 lbs you'll probably love this chair. I did not have a problem fitting in the chair, if was quite spacious. Wheels are great. I really wanted to love the chair, but ultimately decided to return it. The chair has great potential, but just fell short of expected comfort level. For me the price and quality did not match.

The chair is really comfortable, highly recommend.

Even though this chair can be adjusted countless ways, you can pretty much do it all with a single lever. This makes for a comfortable, easy to use and versatile chair that I use all day for working and at night for gaming or for streaming movies. Assembly is extremely straightforward (spare screws are even provided, just in case) and requires only the included Allen key. Wheels are silent and as sturdy as the frame. Armrests can be positioned in pretty much all directions, just like the headrest, which is surprisingly comfortable. The lumbar support, which is this chair's claim to fame, is absolutely fantastic. My old ergonomic chair was good, but this one beats it in just about all aspects. I've only had it a week or so, so my opinion may change in time but right now, I am completely satisfied with the product. My only minor concern is the multi-function lever itself: it's made of plastic and does not seem to be built to last as long as the rest of the chair is. In fact, mine was broken out of the box during shipping but fortunately the distributor (McKee Hardware) immediately sent me a replacement part. Still, I would like to see a metal lever instead.

I bought this chair in the Fall of 2019 (at quite a high price point) and enjoyed it for roughly 5 years. That was until the mechanical components of the chair completely failed, rendering it permanently stuck in a reclined position. I checked their warranty policy and saw the mechanical components were still covered and filed my claim on August 19 of this year. Fast forward to today, 4 months later, and there has yet to be a resolution. They currently have $70 of my money for shipping and have just constantly pushed the goal posts out for when they're shipping it. They've quoted 3 different dates to me now and I have lost all confidence I'm actually going to receive my warranty claim. I would avoid purchasing this chair if you're reading this. Customer care is practically talking smoke, double speak, and deception. If your chair fails, you'll be left with no recourse as their warranty department gives no guarantees and just tells you something new every time.

It has very good quality. Really worth to buy it for your work. Someone works over 10 hours in your chair. It is important for you. After I made an order, they delivered in 4 days, much shorter than they promised. Very comfortable. You won't feel tired as in the cheap chair. Good decision.

This office chair is by far one of the most comfortable ones I've used. Plus the support it offers for the lower back is top notch. The only issue was the five year warranty that dated back to 2016. How does a chair I received a month ago only have two years left on its warranty? Plus when I reached out I never heard anything back.