Wago 773-168 Push Wire Connector – 8 Conductor – 10 PK

Poor planning led to many wires in the junction box. It took up a lot of space and was very hard to make all of them connect so I tried these. They were very very easy to use. You just need to make sure that your wire is exposed about a half inch from the insulation. These made my life so much easier in that situation.

Good quality

The items are exactly what we wanted. Had to contact the company for help with a non-product issue and they were great.

So, I am not a professional electrician, but I am in the school of thought that as long as my connectors are UL listed and code compliant, they are going to be adequate for my home. So I don't really care which connector is "best". These were good enough for my application. I had a junction box that had a bunch of 14/2s meeting, and I was going to have to make an unreasonably sized splice for the box (and the smart switches I was putting in). I used one of these to splice all my ground wires together, and I threw in a pigtail leading to a Wago 221. That way, all of the current grounds could be semipermanent but I'd have an easy job of swapping out devices. I used 221s for the rest of the box. Because these are rectangular, it was easy to fold the wires over. They also allow the wires to turn (rotate) in the jack, which helps with the folding over. They also stack. This all makes the box pretty easy to organize. You still have to work the wires, but they just end up have fewer unmanageable folds that take up more space than they should. I prefer the 221s since they are easily removable, but these semipermanemt ones are great for things that (probably) won't change (but still might). Also, they don't make an 8 port wago 221 and I wanted my 6 grounds and pig tail way in the back there.

These work great! I have arthritis in my hands and fingers which make conventional wire connectors more difficult. Be sure to use one with a couple of extra ports so you can add wires later if needed. Otherwise you'll need to cut and re-strip all of the wires. Highly recommended.

The nice thing about these is that you can push in one wire at a time. There is no need to hold a bundle of wires together like with a wire nut. Additionally, each wire gets a nice, secure condition along with visual indication.

I was having a problem figuring out how to wire a new 3 gang switch in our living room. I had a total of 7 neutral wires to connect together. This device was the answer to my dilemma. I have some extra, if you need one.

I didn't know these devices existed until I did some online research on how to join 5 or more wires using wire nuts. This connector is so simple to use that I will probably never use a wire nut ever again for a connection of more than 3 wires. Sometimes new technology really is better!

Works amazing when you need to connect multiple wires