Noctua NF-P12 redux-1700 PWM, High Performance Cooling Fan, 4-Pin, 1700 RPM (120mm, Grey)

Quiet, built to last, low speed, low noise. These stabilized my temps with air cooling on Ultra 7 265k more than expected. They look great too with a simple color scheme. Move air though not as much as a loud fan, but they whisper which is what I want.

Ordered this fan for my PC as an exhaust fan, because I got sick of my temps creeping up when gaming for extended periods of time. This fan is a beast in more ways then one, it moves a lot of air, but with the air movement it does get ramped up on noise. If you are looking for a more quite solution then this would probably not be the fan for you. in saying that you could use this fan at lower speeds and the noise is not as noticeable. I choose to run the fan at max speed when my PC hits a certain temp threshold. i have noticed a huge difference in overall temps and heat lag on my system. It has been solid as I use my PC daily for numerous hours and has not skipped a beat, no bearing noise, or anything. I highly recommend this fan for anyone, just be aware the faster it turns the louder it will get so set your fans speeds to your liking. It is also very solid built!

Even though this is Noctua’s low-cost line, this is a very nice fan. It is very quiet. It has a low running speed capability (I have mine set to start at ~200 RPM). The gap between the blade and the edge of the housing is the smallest I’ve seen - likely improves static pressure capability. The rubberized corners provide nice mechanical isolation from the metal cabinet I mounted the can on. PWM control works nicely with a 2-channel fan controller I bought on Amazon. Given the quietness, and the build quality, I’ll likely use Noctua fans for most of my future needs.

Purchased as a replacement for a broken CPU fan, it works a treat. Quality build, quiet, more than adequate airflow, and easily cools an 11600K without a fuss. It's my third copy of this fan, It's a great value for money.

I purchased this fan to replace a noisy case fan in my wife’s desktop PC. I chose the Noctua due to thier reputation for manufacturing robust and reliable products combined with over five years experience using heat pipe CPU coolers made by the same manufacturer. In the interest of transparency, I should also state that, after I ordered this fan, I discovered I already had an earlier model of the same fan stored in my spare parts box and subsequently returned this one. I’m confident this fan would perform equally well or better than the fans I already have in use. For a budget-friendly price, this fan comes with features usually found only in premium offerings. The frame is robust with thick, support ribs where the mounting holes are located; built in PWM speed control circuitry, specially engineered fan blades that reduce wind noise, vibration damping silicon strips along the mounting edges of the frame, and a top speed of 1700 RPM.

These actually look almost attractive with the optional rubber corners installed. Even with the added cost of the corners, these fans represent a great price-performance point for that they are. I have four of these mounted to a 30mm thick 480 radiator. They move a huge amount of air through my radiator. At full speed, they are a little loud, but at 50% or 60% speed, they are literally whisper quiet and still move enough air through my radiator to sink 600+ watts while keeping my coolant barely above 30c. These are massive overkill for my application. On the other hand, who doesn't like massive overkill? It irks me a little that I have to buy $15 worth of little rubber bits on top of $60 for the fans. But, this annoyance is mostly offset by the fact the fans are not butt ugly like most of the other Noctua fans. I am good with the cost reduction and the absence of the usually included accessories (rubber screw mounts, low noise adapter, y cable, and extension cable). However, the fans look kind of bad without the corners These corners are more essential than the usual accessories. It just feels a little scammy. Noctua, if you want to take this good product and make it exceptional, my suggestion is include four black corners with each fan. If your customer wants a different color or wants eight of them instead of four, she can still buy the corners. I think the cost reduction is great and I do have a big pile of unneeded accessories from all of my previous Noctua purchases, but I don't have any spare corners. You took it a little too far. Add a few black corners to this product You could even increase the price by a couple of bucks; that would be fine by me. But don't leave me feeling scammed. If you keep doing this, it will ruin my brand loyalty.

Half the price of the As, better pressure and airflow with only a couple dB(A) more but in truth, I can barely hear these when they are at max RPM, just a low whoosh of air, nothing annoying. Works in our home theater just splendidly. I replaced the fans on the ThermalRight Assassin with these because they have more airflow and pressure and a high rated MTBF whereas the stock 120s on the Assassin were not rated at all. So five total, one on lower front, one on very bottom, one on rear of the case and two on the CPU cooler. The case fans have screen dust filters. Cinebench results right up there with their top slot, difference accountable by running background processes. i7-13700K running @5400 when needed, Asus Z790-Plus, G.SKILL (2x32) CL28-34-34-89, one 2T 990pro m.2 and two 1T SATA SSDs , MSI Ventus RTX 4060 8GB, pretty darn good for all these heat producers and simple air cooling. Case is a heavily modified and ancient Antec P160. Three of these fans mounted on the case pull cool air in and exhaust out the top which was cutout ~5x10 with a nibbler and covered with 6x6 galvanized HW cloth (heat rises). All fans controlled by Asus AI cooling 2. What I find interesting is that I hardly ever hear these fans. They spend the vast majority of time between 700 and a 1000rpm even when playing BG3 and are inaudible to me. A testament that they move sufficient air to keep everything cool at quiet low rpms. Love these fans.

whisper-quiet and reduced pc temps dramatically over the original fans. absolutely love them

اسطوريه صراحه

The fan I received was original with full noctua packaging, and it worked as expected from Noctua quality, giving strong airflow. Only downside in my opinion is at the time I was buying price was very expensive.

Ich habe den Noctua NF-P12 redux-1700 PWM als Ersatz für meinen bisherigen Gehäuselüfter bestellt – und ich bin absolut begeistert! Schon beim Auspacken merkt man die hohe Qualität, die Noctua immer wieder liefert. Der Lüfter fühlt sich robust und hochwertig verarbeitet an. Die dezente grau-schwarze Farbgebung des Redux-Modells passt perfekt zu meinem schlichten PC-Setup, ohne aufdringlich zu wirken. Leistung: Die Kühlleistung ist beeindruckend. Selbst unter Volllast bleibt mein System kühl, und das bei konstant niedrigen Temperaturen. Der PWM-Anschluss ermöglicht eine präzise Steuerung über das Mainboard, wodurch der Lüfter immer nur so schnell läuft, wie es nötig ist – ideal für einen leisen Betrieb. Lautstärke: Apropos leise: Der Lüfter ist kaum hörbar, selbst wenn er hochdreht. Für jemanden wie mich, der einen nahezu lautlosen PC schätzt, ist das ein riesiger Pluspunkt. Montage: Die Installation war kinderleicht. Dank der durchdachten Bauweise passte der Lüfter perfekt in mein Gehäuse, und die beigelegten Schrauben sorgten für eine sichere Befestigung. Fazit: Der Noctua NF-P12 redux-1700 PWM ist jeden Cent wert. Er bietet eine erstklassige Kombination aus Leistung, Lautstärke und Design. Ich würde ihn ohne zu zögern weiterempfehlen und werde bei zukünftigen Builds definitiv wieder auf Noctua setzen. 👌 Top-Produkt!

箱の潰れもなく届きました。型番も一緒です あとは実際に試すしかないと言ったところです

**Noctua NF-P12 redux-1700 PWM Review** The Noctua NF-P12 redux-1700 PWM is a standout choice for anyone looking to enhance their desktop cooling system. This 120mm fan is engineered for high performance, and it certainly lives up to its reputation. **Design and Build Quality:** Right out of the box, the NF-P12 showcases Noctua's trademark quality. The grey finish is sleek and unobtrusive, fitting well with any build. The fan blades are designed for optimal airflow and reduced turbulence, which is a testament to Noctua's attention to aerodynamic detail. **Performance:** Operating at a maximum speed of 1700 RPM, this fan delivers impressive airflow while maintaining low noise levels. The PWM control allows for dynamic speed adjustments based on your system's needs, making it versatile for various setups. Whether you're gaming, rendering, or just browsing, this fan keeps your components cool without generating distracting noise. **Installation:** Installing the NF-P12 is straightforward. It comes with all the necessary mounting accessories, and the 4-pin PWM connector makes it compatible with most motherboards. The fan's lightweight design ensures it can be mounted in any orientation without concern. **Cooling Efficiency:** The cooling performance is top-notch. Even under load, the NF-P12 manages to keep temperatures in check, contributing significantly to overall system stability. It’s an excellent choice for both case cooling and heatsink applications. **Value:** While Noctua products tend to be on the pricier side, the NF-P12 redux-1700 PWM offers excellent value for its performance and longevity. The brand is known for reliability, and this fan is no exception; it’s built to last. **Conclusion:** In summary, the Noctua NF-P12 redux-1700 PWM is an outstanding cooling fan that combines performance, efficiency, and quiet operation. Whether you're building a high-performance gaming rig or just need a reliable fan for everyday use, this model is a worthy investment. Highly recommended for anyone serious about keeping their desktop cool and quiet.