TYGER Towing Combo: 2inch Receiver Hitch & Wiring Harness & Hitch Cover Fits 2007-2018 Wrangler JK 2Dr & 4Dr (Exclude 2018 JL Models)

TYGER Towing Combo: 2inch Receiver Hitch & Wiring Harness & Hitch Cover Fits 2007-2018 Wrangler JK 2Dr & 4Dr (Exclude 2018 JL Models)

Q: Are wiring connection instructions clear? Not really versed on how to wire up this hitch so that all the trailer lights will work. Good as Factory?

Hi Larry, Yes, the wiring instructions are very easy to follow. To wire it up, just remove the two left hand screws on the rear left tail light and take the tail light out of it mounting position. There's plenty of room to feed the wire down to the hitch. Plugging the wiring harness into the factory tail light wiring is simple, because there's only one way to connect it. After that, reinstall the tail light and put the two screws back in. They need to be snug, but don't over tighten. Underneath, run the wiring along the frame. The handy wire clips plug into factory holes on the underside to keep the wire up and out of the way. Hook the end of the wiring harness to the clip on the hitch and you're done. Like you I'm not too keen with automotive electrical, but all total I had the wiring installed and hooked up in about 15 minutes.

Q: what is the hitch rating?

The hitch has no problem up to 3500 pound it’s all you should pour

Q: Will this fit 2020 Wrangler Unlimited sport s

I do not know for certain, the description says 2007-2018. I have a 2007 and it fits perfectly.

Q: Will this fit my 2017 Jeep Wrangler unlimited and maybe a stupid question but did my jeep come with the ability to add this without much effort?

Yes, it should fit your 2017 JKU. I installed mine in less than 1 hour. No drilling required. The mounting holes are already in the rear cross member. When installing the wiring harness start at the hitch and feed it up to the taillight. There is a piece of foam covering the hole the harness will go thru to the taillight.

4.8/5

Product ID: 81112673

Secure Transaction

Details

Brand
Tyger Auto
Item weight
7.72 Pounds
Vehicle service type
Trailer
Material
Alloy Steel
Finish type
Powder Coated

🔧Easy DIY install

⚖️3500 lb towing capacity

🛡️Corrosion resistant

Frequently Bought Together

TYGER Towing Combo: 2inch Receiver Hitch & Wiring Harness & Hitch Cover Fits 2007-2018 Wrangler JK 2Dr & 4Dr (Exclude 2018 JL Models)

Reese 21536 Drawbar 2 Inch Square and Ballmount Towing 2 Inch Starter Kit, Black

METOWARE Trailer Hitch Lock - 5/8" Dia Locking Receiver Pin, Fits 2" Receiver Tubes, Class III & IV Hitch Receivers, Anti-Theft Trailer Receiver Lock, Black (1 Pack)

Description

🚙 Elevate Your Adventure with TYGER Towing!

DURABLE PROTECTION - Black powder coating ensures long-lasting corrosion resistance.
HITCH COVER INCLUDED - Protects your receiver tube from mud, dirt, and pests.
HEAVY DUTY PERFORMANCE - Supports up to 3500 lbs gross trailer weight and 350 lbs tongue weight.
SEAMLESS COMPATIBILITY - Custom designed for 2007-2018 Jeep Wrangler JK models.
PLUG PLAY CONVENIENCE - Wiring harness designed for a factory-like appearance.

The TYGER Towing Combo is a robust towing solution designed specifically for 2007-2018 Jeep Wrangler JK models, featuring a 2-inch receiver hitch, a plug-and-play wiring harness, and a protective hitch cover. With a towing capacity of 3500 lbs and a durable black powder-coated finish, this combo is built for both performance and longevity, making it an essential upgrade for any off-road enthusiast.

Specifications

Manufacturer	Tyger Auto
Brand	Tyger Auto
Model	TG-HC2J001K
Product Dimensions	32.41 x 18.29 x 12.09 cm; 3.5 kg
Item model number	TG-HC2J001K
Exterior	Painted
Manufacturer part number	TG-HC2J001K
Special Features	Easy DIY installation. All mounting hardware and instruction included., Limited Lifetime Warranty against manufacturer defect!
Item Weight	3.5 kg

Have a Question? See What Others Asked

Are wiring connection instructions clear? Not really versed on how to wire up this hitch so that all the trailer lights will work. Good as Factory?

what is the hitch rating?

Will this fit 2020 Wrangler Unlimited sport s

Will this fit my 2017 Jeep Wrangler unlimited and maybe a stupid question but did my jeep come with the ability to add this without much effort?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

$446.05

Duties & taxes incl.

USAstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

TYGER Towing Combo: 2inch Receiver Hitch & Wiring Harness & Hitch Cover Fits 2007-2018 Wrangler JK 2Dr & 4Dr (Exclude 2018 JL Models)

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions