1.75mm TPU Filament 0.8kg, Flexible Fast Color Change, Flex Nightsky

Ive put a few rolls through my bambu a1 so far and i haven't had any issues so far. I typically print using the sport setting so it is capable of fast printing speed while maintaining good quality. after 3 rolls i haven't noticed any significant clogging through a .8mm nozzle. I typically print PLA and haven't noticed any strange smells from this, however my printer does sit by a window fan. The color looks good, the finish is glossier than i would like but i think its typical for tpu. The moisture content out of the packaging wasn't bad, on all the rolls ive been able to pull it out of the box and print without having to dry first.

Like everything else from Ziro, this works great. Prints come out perfectly smooth. Support material is easily removed. It's been perfect.

I have to say I love this stuff. It prints cleanly and sticks to the bed well, sometimes to well. I had some minor stringing, but thats to be expected with TPU, as I used somewhat higher temps (240c/60c). It's also quite strong. I tried to break a long slender piece I printed and couldn't do it! As long as you keep your speeds down (I used 75mm/sec) it works wonders! It's a bit pricer than some of the cheaper brands, but worth every penny. After my first roll I cheaped out and bought one of the discount brands of TPU and was sorely disappointed. I'm back in the ZiRO fold! I've gone thru two rolls of different colors (Green & Black) and loved every single print. I also love the fact that they ship several extras your won't see with most other brands. You get a resealable air tight bag for storage, plus they also sent along a sample of Cleaning Filament, and a random sample of one of their PLA colors.

This should get 100 stars! Not only is it better and brighter in person but, OMG! It's a #D Printer's amazing friend, this is both beautiful, functional and has the WOW factor to the moon, I have used this as an insert for a skeleton purse and for making a human heart...first words out of people's mouth is OMG that is beautiful and absolutely stunning! I love this and highly recommend this as well as I will be purchasing a lot more!

This filament printed beautifully! It was neatly wound on the spool, had zero clogging, and released easily from the build plate on my Creality K1Max. I would definitely purchase again!

Wow! The filament is quite good, nice finish! I'm also insanely impressed they threw in 5M of cleaning filament with instructions as well, that certainly earned them my future sales! I typically use Overture, but the price is up there, Ziro has a competitive price at a great quality! The stringing is a little bit more than I'm used to, however it's still not bad at all. It bridges like PLA and after print has really good reforming properties alongside a strong hold with layers. It's honestly the best TPU I've had for such bridging. Ziro has zero clogs and it's right on point with it's diameter!

Prints very well and it is very flexible.

First off, this filament performs fine. It arrived vacuum sealed and dry enough to print out of the box, which is not exactly common when it comes to TPU. The final product seems to behave like any other 95A TPU, so no complaints there. So, why only three stars? Because I didn't get a full KG, which is the standard size/weight for a spool of filament. Instead, Ziro and/or Amazon decided to offer this in a highly-unusual 800g size. Close enough that it isn't immediately apparent you're not getting a full spool based on the photo while being just enough short that Ziro can offer it below the going rate for a 1KG spool of TPU while hoping you don't notice the shortage. This is shady and borderline dishonest if you ask me. Shame, too, because I love Ziro filament and would otherwise have recommended it to anyone for low cost with relatively high performance/output quality. I love their product, but this will be my last Ziro purchase. I just can't get behind shady business practices like this.

Been printing sainsmart filament and had no trouble with it. This stiff is quite soft and is harder to pro t than already hard tpu. Have not enjoyed this tpu. Only 50% have-been successful. Straight lines ok. Anything intricate forget it

Great TPU filament hardness is rated at 90A on the shore scale which seems about right possibly a tiny bit softer but prints fine on an ender 3 pro with speed set at 20mm/s although still need to dial it in to stop the stringing but after looking at other peoples reviews seems like I just need to turn the retraction back on and upto 10mm. So going to try at faster 40mm/s and up retraction to 5mm n give that a whirl. Even comes with 50 m of cleaning filament a resealable bag and a couple of sachets of silica gel or similar moisture absorption.

Good filament although have not experimented enough with it yet to give a 100% review.

Great filament this was my first time using TPU and I went with this brand from reviews i had seen and I can’t lie it’s great

Buon tpu, ottimo prezzo se preso in offerta