Detroit Axle - Rear Sway Bar Link for Mercedes-Benz C300 E350 C250 GLK350

Car drives very smooth

Great deal

Works great my noise gone 2013 kia sorento ex

Installed a pair on my 2013 Toyota Prius V in August 2023. By August 2025, all 4 dust covers had shredded and mostly disappeared. The joints were still good, but I was disappointed that the boots went so quickly. Additionally, I just swapped out both front struts. I'm meticulous about threading nuts properly and torquing them to exact specs, but when I put the left front sway bar link back in, even with my attention to detail and gentle hand tightening, the nut spun before it was fully tightened. Since it won't tighten to spec, it'll just make more noise over time. I'll have to replace it and will likely have to carefully saw the spun nut and end of the pin off to remove the bad part. This time, I chose a different brand. So in sum: Had I not replaced my struts, these would have continued to function, albeit without the boots. But overall, while they fit and are affordable (4 stars), it appears I got what I paid for (not 5 stars).

These fit our 2016 Cruze LT. Installation is pretty easy, it took about an hour to do both sides. You'll need an 18mm and 9mm wrench to remove the factory bars and an 18mm and 8mm to install these. Be careful because with the tire off the ground there is a lot of tension on them. I used one jack to lift the car and another jack under the control arm to remove the tension. If yours are making noise this is a good fix on a budget. Our Cruze goes down the road silently now.

Fits good. Used them on my EK Civic hatchback. A couple threads short connecting to lower control arms, but was able to get enough to snug it down completely. See pics. Used them on a 24mm sway bar, with wider bushings (the ones it came with kept popping out) also added 1inch collars for extra security. Feels good taking fast turns. Just need an alignment and ill be good.

I got these after I got a differintal+rear sway bar for my 1999 3.0l ranger. They bolted right up. I can definitely feel a difference on turns with a complete rear sway bar.

Really A+ quality and fit on my 2006 R/T Magnum.

After fixed clunk noise increased

The links look decent enough, but I don't know if they have grease in the joints. Why don't they Detroit Axle just have a note saying about greasing the parts. I don't know yet how long the bars will last. Update: So I spent almost the same amount of dollars to buy a grease gun and the grease. So far so good. No more clunking noises.

I ordered these Detroit Axle sway bar links for my 2013 Ford Explorer on March 6th, 2023 and they arrived on March 8th, 2023, installed them on March 10th it is now March 22nd, 2023 and the upper driver sway link bearing is already busted on smooth paved roads the passenger side is similar and will also need to be replaced. VERY POOR QUALITY PRODUCT WOULD NOT RECOMMEND!

the broke broke after 6 months of utilisation