Carbhub ABS Wheel Speed Sensor Compatible with Toyota Tundra 2007-2017

Work just fine

I replaced my fog light bulbs on my 2007 Tundra CrewMax truck and next day the weather turned cold and I noticed my speedometer was not working. I thought I had damaged some wiring harness but later in the day when the weather warmed up my speedometer worked but my brake light, VSC warning light, ABS light and a couple others were still showing. Only when it’s cold my speedometer didn’t work and after several days of troubleshooting, my check engine light popped on and the code was the speed sensor A. I got these speed sensors and to my surprise they weee very easy to install and had all four installed within 30 minutes without having to raise the truck off the ground. There are two identical sensors for the left side and two for the right side. After replacing these I cleared my check engine light and when started it up, all warning lights were off. I’ve driven around about 20-30miles and everything seems to be running excellent! These worked perfectly and were identical to the factory sensors. Great buy and works perfectly. Just note: I used a little petroleum jelly just on the rubber oring to install without damaging the oring. The front sensors required a size 4 mm Allen wrench and the rear required a 10mm wrench to remove the sensors. I also used a right angle pick to pop up the clip to remove the plug using a small pair of channel lock pliers. Be careful as mine removed easily but depending on corrosion or etc… yours may be a little more difficult to remove so just take your time.

Plug and play. They work