Question 1

Does anyone have a positive experience in removing OLD oil stain from concrete?

Accepted Answer

I had a massive old oil spot on my concrete. Thought I just had to pour it on and watch the magic. Nope, you have to pour it on (I didn't dilute it), then scrub it for a minute or two, then rinse it off with the hose. Did that a couple times because the oil seeps back from underneath, and we are good!
If this isn't working for you, try again, but make sure to spray it off with the hose!

Question 2

How can i used this product in car engine? What step should i follow?

Accepted Answer

Engine has to be cool. Cover any or all electrical components that will get damaged with water. Spray Oil Eaters and let it soak all the gunk. Works best when used with pressure washer. Do not spray straight to electrical distribution boxes or Fuse boxes. On some newer car you can get away with not covering ay electrical harness or components. On older cars you may want to use precaution measures and cover these items with zip lock bags trash bags,etc. After rinse let the warmth of the car dry the excess water for about 5-10 minutes. Remove all covers. Start you car and let it run on idle these way your car can generate heat and dry any remaining water. If you engine begins to run rough you might have moisture or water in you electrical harness,distributor,coil packs or spark plug and wires. Best if you disconnect the wire harness/plugs one by one and inspect for water intrusion or moisture build up. Once you locate the issue let it air dry or spray with compressed air. If you do not have a compressor and air gun available, a computer aeresol spray will do. I used isopropyl alcohol in the past, but alcohol will remove the corrosion preventive coat. Petroleum Jelly like Vaseline can be applied. Auto part store have a variety of electrical grease you can get. Ensure that you induction system is air tight. If equipped with carburator, make sure that the dish is seal and as a prevention spray around the carburator and its components. Key points, cover electrical components, spray away from electrical distribution boxes,fuse box and other electrical components. And ensure your induction system is sealed. There is some prep work that has to be done before you spray you engine with any liquids. Oil Eaters will do your dirty work. Rinse at your own discretion.

Question 3

Anyone tried this on sealed asphalt oil stains?

Accepted Answer

what is a good cleaner for brick drieway oil spot?

Question 4

How much odor does this product give off when using and after use?

Accepted Answer

Very strong when spraying,no odor after that

ASIN	B000EALHHG
ASIN	B000EALHHG
Best Sellers Rank	#699 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #8 in Commercial All-Purpose Cleaners
Brand Name	Oil Eater
Cleaning Agent Formulation	Degreaser
Customer Reviews	4.3 4.3 out of 5 stars (11,319)
Date First Available	June 23, 2010
Global Trade Identification Number	00027427354370
Included Components	Unit^Instruction Guide
Item Form	Liquid
Item Type Name	Automotive Accessories
Item Volume	1 gallons
Item Weight	8.5 pounds
Item model number	AOD1G35437
Manufacturer	Kafko International, LTD
Manufacturer	Kafko International, LTD
Material Feature	Biodegradable Warning
Material Features	Biodegradable
Material Type Free	Noncorrosive, Biodegradable Formula
Model Number	AOD1G35437
Number of Items	1
Part Number	AOD1G35437
Product Benefits	Non Abrasive, Concentrated
Product Dimensions	12 x 3 x 12 inches; 8.5 pounds
Scent	Fresh Lemon
Size	128 Fl Oz (Pack of 1)
Special Features	Concentrated, Non Abrasive
Special Ingredients	Grease-Cutting Agents
Specific Uses For Product	Floor
Surface Recommendation	Concrete, Wood, Laminate, Fabric
UPC	027427351379 027427354370 848238040272
Unit Count	128 Fluid Ounces
Warranty Description	1 year manufacturer

Original 1 Gallon Cleaner, Degreaser - Dissolve Grease Oil and Heavy-Duty Stains – Professional Strength

Details

Details

Description

Specifications

Common Questions