New TypeC Version Wowstick 1F+ 69 in 1 Electric Screwdriver, Dual Mode Cordless Lithium-ion Charge LED Power Screwdriver

This comes with a nice case and three tubes of screwdriver bits of every imaginable kind.I am very pleased with the purchase which is perfect for me as a tekky for opening laptops and small electronic items like phones and tablets etc. It has a rocker type switch, press the lower end for doing up and the upper end for undoing. When not pressing the switch it operates as a normal screwdriver so you do that first to loosen a screw and then squeeze the switch to do the easy but annoying bit for you. To do up, press the switch till it stops and then release the switch and finish off by hand.Gripes:The carry case is nice but you can only get one tube of bits in it. That isn't a problem for me as I won't use them all ever.The case is held closed by magnets which on mine were not glued in so they kept popping out and then I had to try to get the 8 of them back in the holes the right way round north to south poles and glue them in place. Believe it or not that was quite a challenge because they are very fiddly! Hopefully I was just unlucky and yours will be fine.The stand is very nice but is a bit pointless. You put it into the stand bit end down. It's not terribly secure like that. I think it only really exists to give it a bit more of a premium look. Really they should have built in a charge socket so the screwdriver would charge when it was in the socket. The USB socket is in the other end but they should have made the stand the charge stand a bit like with an electric toothbrush. It would have been perfect then. But like I said this does look and feel like a premium device and it works well for my purposes.

The media could not be loaded. You know what I was actually suprised by this little screwdriver. I repair and build hifi and sometimes I have to unscrew many many screws.I didn't think this would help much but actually it works brilliantly and can handle tough screws. The fact you can use it like a normal manual screwdriver means you can use hand strength to undo the screw then use electric power to take it out.It's well built, brilliant packaging and fully kitted with a handy durable case.

Well I saw this on a YouTube channel run by a man called Sorin a very competent electronics engineer who shows issues warts and all and is very honest and good, definitely worth checking out. He has one of these screw drivers and recommends it, he states that at first he didn’t like it, however after usurping it for a couple of days and now many months if not over a year, he realy likes it and rates it highly, I would agree having just received the product and can confirm those findings, however there is never a perfect tool and this is one of them, this was not my first one and I have tried or received several cheaper ones and looked at many, the balance seems to be quality vs ok!🤔 PROSDriver. 5Stand. 4Packaging 5 a nod to Apple as the way this is packagedUse. 5Reliability. 5Longevity. 5Power 5Accessories 5Portability. 4Case. 4🫤 CONS and solutionsStand should have charger portDrill case should either hold all bits tubes or have larger holder or separate one, the magnetic case is lovely, however it only holds one tube of bits and the drill, so there are two more tubes and the base holder not accommodated for a housing should be designed that accommodates all the accessories, this would then make it a truly brilliant product, mag base incorporated into said case would be easy and section for other bits to make it portable and travel friendly.The really ironic thing is that the answer is staring you in the face, in that the whole design of the packaging is almost the solution, such is the way that the item arrives in this lovely box with everything inside boxed is how I use this for my own storage to overcome that accessibility, I have stuck a tab on both ends of the box, which allows me to access the contents easily, the bits in tubes that have contents printed on outside so self contained, the magnetic case with one tube of most used bits and drill, so I can just grab that and the rest is in the box, or if going away and think it’s something to save in case for work on laptop or camera etc then I can as again the bits are in tubes that hold them separately but slide out to access.ConclusionIt’s a shame that this brilliant product wasn’t given a little more thought in the design stage at incorporating it so that like when you get a phone or other tool, you are then left trying to accommodate its usage and storage, tabs on the box and a layout to place the parts or accessories inside the box, maybe a magnetic lid on box and moulded inner would have done it all and saved on little boxes for each separate piece, like the magnetic mat, screw top jar for screws washers bolts, base and then no need for the magnetic lidded case that is beautiful in itself but totally unnecessary if it had been thought through, they made more fuss of the Lithium battery, which is fantastic to have but only needed to be stated clearly that it’s a Lithium one and then the component parts.

Not sure what thickness is for but let's say build quality. A fantastic little tool with all the bits you will ever need. I will be modding the little stand for it so that it charges as well.Other than that its perfect. Lasts for ages and the accessories are well thought out.For under £40 I think its excellent value for money.Overall a nice addition to my electronics tool kit.

Overall this tool has good built quality, many bits for various applications.Magnets on bits could be slightly stronger.The storage seems great till you need to carry more than one sleave of bits as there are only 2 slots.