E12 Socket,Ceramic Candelabra Socket E12 Bulb Lamp Holder,Light Socket with Wire Lead for E12 Incandescent LED Light Bulb (4-Pack)

Good quality. BTW comes with small nipples, washers and nuts. It's the same socket that was in my çieling fan with a little different mounting. The original hardware was a metal tab with a screw hole. If you look down into the socket you will see two offsets in the porcelain. A small Phillips head screwdriver will enable you to unscrew the hardware and replace it with the hardware from the old socket. I pushed the second screw I didn't need out from the back of socket. the back. The old mounting tab fit exactly. It sounds tricky but it's very doable.

Funcionando muy bien, los use para unas lámparas y quedaron perfectamente

I had a rather expensive, hand-wrought metal light fixture with 8 candelabra-base lights. Unfortunately, the great craftsmanship was marred by the choice to use cheap plastic-type sockets that are used in so many candelabra fixtures these days. The cheap plastic either cracked or the thin bit of metal used for electrical contact came loose so there was no contact, and I was down to only two usable sockets. Whoever came up with the "bright" notion to skimp on metal and use this crap plastic should have a class action filed for swindle. But enough of my rant borne of my previous frustration.Enter now this item, a sure balm for all my woes! Bless you for continuing to offer full metal sockets safely tucked into the ceramic that generations have come to trust. These are just what you will want, ready to swap out the junk for the sturdy substitute. The base brackets are threaded to attach to your existing thread mount and the wires are securely attached, though ideally I would have liked longer wires for half of my lights; I had extend the wires cannibalized from the remnants of the original sockets for the longer arms of the fixture. Not perfect, but not worth dinging a star.When I completed the replacements with these sockets my fixture was fully lit, all 8 sockets reliably doing as they should on the first application of electric. Screwing in the bulbs was as smooth as you would wish, unlike the tendency to cross-thread of the plastic. I already have a replacement project in mind for the two extra sockets now at my disposal.Quit tearing your hair out and swearing at major fail engineering in most any modern candelabra fixture! Buy these replacements and save yourself major grief!

Used to fix ceiling fan light the wire was a little smaller then original the light works now

I purchased a second hand light fixture for my house. When wired into the house, the breaker kept tripping. It was figured out that one of the sockets on the fixture was broken. I purchased this item because the local hardware stores did not carry candelabra light sockets. Once the new sockets came I was able to unscrew the old socket, untwist the wires and replace it with the new socket. Replacing it just required me to thread the new socket wires into the fixture, twist the correct color wires together, replace the end cap for the wires and screw the base into the light fixture. Once the swap was done, I was able to wire the fixture to the house and have it working without tripping the breaker!

Good product.

I've purchased these many times and have always been happy with the quality.

I had no issues replacing the broken socket.