AMERICAN MICRONIC® 15 L Horizontal Water Heater | 8 Bar Pressure | Titanium Glass Lined Seamless Steel Tank | Variable Temperature Control | Magnesium Anode | BEE 4 Star | AMI-WHH-15LDx (White)

Good Quality, Hot water flow is great, temperature adjustment is available, mounting brackets not sturdy.

This product is exactly as described by seller. The quality finish and powder coating is excellent. Many say it’s a Chinese product so what.? The seller may have used certain marketing strategies but that does not bother me. Are your mobiles made in USA? So stop complaining. I think this is a premium quality product even if finished or made in China or for any reason assembled in India it is manufactured considering the 5 star rating of Indian standards. The packing is quality standard and includes warranty card, manual, safety valve for inlet, and two bolts 4 inch for hanging the geyser. The electric plug 3 pin 15 amps is fused and attached to the cable. The knobs and indicator lights are all user friendly and informative. There is also a temperature gauge at the top of the geyser which works when your water starts to get hot. One can change the settings of the thermostat once you see the temperature gauge and adjust how much hotter you want to set your thermostat cut off to precisely. Price wise it is very economical for 25 ltr capacity and much cheaper compared to other brands. Now it all depends how long it works. Seller has provided 2 years warranty on the Geyser. Email and toll free number of service is provided. Looks of the geyser is very good and equally in par with major brands. Surely recommended. I have put my settings of 1st knob voltage at III (2000watts) & Thermostat setting at "E". After the water is heated to the required temperature the red light on the geyser (for heating element) goes off. The Green light is the ON indicator of the Geyser which stays always ON to show geyser is working perfectly. On my 2 days of usage no complaints and everything works perfectly. My settings for using higher wattage is basically it takes less time to heat. Simple logic is the higher the wattage the faster the heating element will heat the water however, it would take more electricity. If you want to stay economical I suggest put the 1st knob setting at 1200 watts (II). It would take longer time to heat the water though. I have given all details in concise and precise manner for all fellow colleagues wanting to buy this Geyser. Those having any questions please ask and I would try to answer them. Only drawback is it does not come with the connection pipes. It is not a big deal ,can be purchased at your local hardware store. Surely you need a plumber to assist you in hanging the geyser and fixing the connection pipes. Just a word of caution: Please ensure after the fittings are done open the water and let the geyser fill itself up fully and you draw out water from your hot tap. Once water flow from your Tap is smoothly flowing then only put the power of Geyser ON. This is a precaution for the element.

Packaging: Excellent packaging. The package came with a 25L unit, a user manual, a safety valve, and a pair of anchor fastener hooks. Note: The product was in an excellent condition at the time of receipt. Installation: As an additional electrical outlet was required, took some help from an electrician. An RCCB at the electrical point and an MCB (at DP box) were installed for the safe operation of the instrument. The anchor fastener hooks have kindly been installed by the electrician as well. The plumbing part have been very simple as it required a pair of inlet and outlet pipes (specific for any geysers could be bought at a hardware store for ~ ₹ 250), a pipe wrench (could be bought under ₹ 500 on amazon), a thread seal tape, and an inlet valve (if needed) for cold water supply. It took about 2 hours in total after creating an electrical outlet ( ~ 5 hours in total for the whole installation process at my home). Performance: The very first use (at 16 hours from the installation - ~ 2 hours 30 mins with the power supply ON): Used the instrument for ~ 5 hours and so far it has exceeded my expectations. Set the temp at 52.5 C (Details: in total 9 markings, i.e. 30, 35, 40, 45...75. The interval between the two markings is of 5 degree C (Calculation: 75-30 degree C/9 markings)), and Wattage at the set point marked as "I" (800 W). The geyser took ~ 45 minutes to reach the 52.5 degree C (Details: inlet cold water temp at 6 pm was 32 degree C* so, the change of 20.5 degree C was attained in an ~ 45 minutes*). Turned on the geyser the next morning around 6:15 am. The heating turned on for a few mins (5-7 mins*) after ~ 7 L hot water has been drawn each time. 72 hours after installation: Kept the geyser's power supply ON for ~ 20 hours during the 72 hours period in order to check the heat saving capacity of the water tank. The heating turned ON intermittently during the time in which the hot water was not drawn which suggests that the tank could hold warm water very well. So far, completely satisfying experience. *Please note that the conditions vary from household to household. Gor example, the need at my home is of ~ 7 L of 45 dgree C to 52 degree C hot water (at an interval of 30 mins for 3 hours in 3 different bathrooms - one on the ground floor and the two on the first floor) from a geyser (placed above the bathroom at the ground floor) connected to an overhead 1000 Ltr tank so, the required wattage and the time to reach the desired temperature of the hot water will depend on one's own requirements.

Looks actually stunning. I have pretty well designed bathroom and I thought a geyser might be a dark spot, but not this one. This actually enhances, the design is cool and the controls are in the right places which gives van premium look, awesome job It has a basic temperature indicator which is like a needle in Speedometer, shows actual heat as compared to just cutoff, which is very near idea It has a temperature knob which is regular, but it also has a voltage selector which gives you control on input power, for people like me who are obsessed with power consumption, this is a dream Price point is just perfect and with all features that this gives I don't think you can find another such brand. We felt so good about it we purchased an OTG from same brand After a year of usage am yet to find huge flaws but some things I noticed are 1. Initially it was so silent you will not know if it's on/off bit off late we hear a very tiny sound (the one you hear when boiling water in stove) but most of my family members don't even notice that but I sometimes do. This may be due to the hard water deposited inside 2. Am not sure if this is a flaw or that's how it works, when I close the input valve I don't get any water, I thought geyser should store water so that we can use it even when there's no input.. I think that's how it should work but it doesn't Apart from these 2 everything else is a breeze.. these are also not flaws just being picky coz I have used it quite extensively, we also have a Havells in another room but this one is lot quicker in heating 15 mins. Just brilliant product.

Returned this previously used product

I have purchased American Micronic Water Geyser of capacity 15 Liters after a through research on internet. My requirements are 1. 5 Star Bee Rating 2. Glass Coating of the Inner Tank & Heating Element that could manage Hard Water 3. Anode that could dilute the harder ions 2. Build Quality 3. Temperature Adjustment 4. Temperature Display of the hot water This particular Water Geyser model (American Micronic AMI-WHM3-15LDx) fulfilled all my requirements and in addition i have got the wonderful additional feature is that Power wattage Selection from 800W 1200W & 2000W. Review After Using for 3 Days i have selected the Power Wattage of 1200W and medium Temperature of the Thermostat (Water Heater) and the water got reached to 50C with in 20 Minutes and the hot water could enough for two persons bathing by mixing the regular water. I am fully satisfied with my purchase of this particular water geyser. The only glitch is that the geyser comes along with 16 MM Anchor bolt hooks the hooks are high quality standard and would be capable of holding even 35 Liter Water Geyser. As i am having only 15 liter one i got 10 MM regular screw hooks and installed by my self. Guys you may think this is bit costlier than the available Geysers on the market but it is value for the money and according to myself Quality matters and single investment than spending time and money afterwards on any manufacturing defects. I will be updating my review after further using of the Geyser.

So far average. Heats water really hot in around 30 minutes. What i don't like is the strange rattling sound that this geyser makes sometimes while water faucet is released. Apart from this annoying sound,the temperature indicator works ,but isn't very precise.It shows temperature to be 50% at times when water is cokpletely cold.So we have deduced that 50% is actually its 0% temperature level. Water pipes had to be bought separately and the company doesn't send any authorised technician for installation.The helpline directed me to get it installed thru urban clap. Packaging was bad.Ordered two 25 litre geysers.Received warranty card in only one. So far as the water heating is concerned,it is quite okay but u have to learn to ignore the annoying rattling sound that comes from.inside the geyser when water inside is hot and water tap is released.

I'm using this last 4 months it's working fine and also I feel this very quality product in this price.