Feedback Sports Rakk Bicycle Floor Storage Stand Road/MTB/Gravel/E Bikes

By far the best stand out there. Easy to assemble. It's compact and easy to move around, elegant, holds bikes perfectly (I use it for both my gravel and my MTB, very different tire sizes and weights, and it works like a charm for both). Heck, the packaging is FULLY recyclable on top of that (no plastic bags or even tape!). If I could give 6 stars, I would.

Stable enough for a garage but not outside on a windy day. Good materials and workmanship The platform for the charging brick is steel and able to function from both sides of the stand.

I ordered two of these one each for the wife and I. There is no assembly simply pull out of the box. My order arrived in a box with the two stands each packaged in there own box. Just lots of extra packaging. Anyways the bikes roll straight in no problem. I read some other reviews complaining about sturdiness and I can see that. The bike must be straight and if you bump them they will move some but I have not had any falls yet or anything. When you see how little the stand actually touches the bike you can understand its not hit proof. We just roll in and out of them and they are perfect for our needs. If you need something to hold up to lots of hits and bumps you'll have to get a stand that grabs a lot more of the wheel or frame. Personally I like that this stand only touches the tires. I do not like hanging from the wheel storage as this could potentially damage expensive wheels and the ones that grab on could damage the rims. While they may be sturdier I will take this stand over any of those. Again roll in straight and your bike stays just fine.

This thing is awesome and works perfect. I bought another one. Easy to put together, just five bolts and you're done. It seems to be heavy duty too and has a little heft to it. It holds my trek Roscoe 7 and my Cannondale topstone 2 perfectly with no fear of the bikes falling over. It doesn't have a huge footprint either.Highly recommend.

Typically, once me and the family arrive onsite, we would just have to unload and lay our bikes down on the ground. Not a big deal, but they were becoming a bit of a trip hazard and taking up a fair amount of space. So I started looking for a stable but small stand so it didn't take up alot of space in the bed of the truck. After some trial and error, I finally found this stand and am really happy with it. The size is perfect, build quality is good and helps hold our bikes up to rinse off after a ride. I carry a RinseKit with me, so after a ride, I can put the bike in the stand anywhere I want and then spray it down with the RinseKit before loading back up to go home. So it's been a nice improvement for our rides and I'd recommend it. Here are my Pros and Cons: Pros: - Item came fully assembled right out of the box - Build quality seems good and sturdy (time will tell) - Smaller size is a pro for me. It's big enough to hold my full size bike, but small enough that it doesn't take up storage space. - Foldable - Ability to connect or daisy-chain to other holders. (I don't use this, but seems like a nice option) - Stand is helpful holding the bike up to wash it after a ride Cons: - Tire can stick into the stand making difficult to pull the bike out at times - Can pinch fingers when folding/unfolding (Not really a con, but something to look out for) - I haven't experienced this, but have seen other reviews saying that it can be difficult to put bikes in the stand when they are daisy-chained together.

We just got 2 new bikes and we wanted to store them properly, not in a heap like we stored our old mountain bike. The bike store recommended the Saris floor rack but it was total junk in our book. Go see my review on it for more details. We returned them after a weeks trial. We then started looking high and low for better racks. All of the reviews I saw about other racks talked about a wide range of problems with undue pressure on spokes, or problems with bikes with disk brakes (which we have). Since Amazon has this product incorrectly categorized, I didn't find it right away! Amazon has it incorrectly categorized as a "Cargo Rack" instead of the more proper "Indoor Bike Storage" Finally the sales lady at the local REI store recommended this rack, which they didn't have in stock. I finally found it on Amazon and ordered two. In my book they're about as perfect as they get. The properly support the bikes by the wheel, not putting any undue pressure on any components. The bikes EASILY go into and out of the rack. If you don't have fenders, you can use the rack on either wheel. If you do have fenders (we don't) it may keep you from putting the bike in backwards (supporting it by the back wheel). Note - If you only have ONE rack, just put your foot on one of the legs of the rack when putting the bike into the rack - this keeps it from moving. Two racks strapped together, don't move when added or removing your bikes. The racks are still easily movable. The clips that can attach multiple racks in a row are easily configured for a line or (small or large) circular arrangements. You can also adjust the inter-rack spacing if using the linear arrangements.

Bon produit, Permets de maintenir le vélo droit sans être appuyé contre un mur ou autre. Fonctionne avec le roue avant ou arrière. Pas de mécanisme à activer, suffit de glisser la roue du vélo dans le support au sol. Au top.

It does keep my bikes straight up. And the advantage is no need to have one bike lean on another bike. I can't say it save a lot if space, but works for me.

Excellent stand, fantastic.

I chose this item because, unlike most others, it has an ingenious spring-loaded feature that holds the bike upright. With fixed width wheel cradles, it's a lottery. If your tyre fits snugly between the guides then you win. If it's not snug, the bike flops all over the place. The spring-loaded arm on this product holds my bike perfectly straight, and I can't see any reason why it won't do the same for bikes with a wide-range of tyre-widths. To start with, the packaging looked smart. Clearly this doesn't influence how the product performs, but it suggests that things are going to be good. And they are! The well-finished product has a sturdy feel to it, but it's not crude or clunky. It came pre-assembled so all there is to do is to release the spring loaded arm and push the bike into the stand. I only needed one, but multiples can easily be fixed together as each one comes with pivot clips so the stands can be daisy-chained together. The pivot clips fold out of the way if not being used. All things considered, this product is perfect for my needs and, to cap it all, it comes with a 2-yr warranty.

Very stable and solid bike stand. Can secure a wide width tire which hard to find in my local area.