AM801 Pulse Oximeter, Fingertip SpO₂, Temperature, PR, Pi, PPG

I really liked this. The instructions are in very small type and poorly laid out. Some of the translations into English are a bit comedy. But it's a smart, easy to use, compact device. The electronic screen is very easy to read and has several different formats you can scroll through and pick a favourite from.. It measures PI and Temp as well as Oxygen and Pulse and shows your heart beat in graph form. It shuts down very quickly after you stop using it which saves battery. It comes with a clip and lanyard. It arrived on time. There is a QR code for an instruction video and two different service email addresses. It arrived on time. It *doesn't* come with batteries. 2 x AAA. I'd buy again and recommend.

Bought for home use. The instructions can be a bit misleading but common sense prevails. I cannot judge the accuracy except for pulse rate where it matches my sphygmomanometer. However the saturation readings are plausible and can be varied by forced breathing so I have no reason to doubt them. It is easy to use and easy to read although the readings are not stored and can only be seen while the device is on a finger. Once removed it shuts down quite quickly, much less than the 8 seconds in the instructions, but obviously good for battery life. I like this device and I hope it has reasonable service life.

I was quite happy with this device and it is easy to use and clear display but I’ve compared the accuracy against a more expensive model and it’s slightly different readings, but the readings do settle down and remain constant. The extra temperature reader is quite good too, however quite a long wait for an accurate reading. However, overall not a bad unit for the price.

Very good quality and easy to use very accurate

I had a conversation with doctor friend of mine and she recommended their device because it produce by an actual medical company. At first I was doubtful about how it's going to work because everything just seemed to simple to be accurate. But I have tried it and compared to other devices, it actually is quite accurate. It is very sensitive as well, as soon as you put your index finger in the device, it only takes about two seconds for it to give you a reading. It takes about 5 - 10 second for it to stablise. It has an alarm system that will tell you when the reading is too high or too low (according to medical guidance). There is a QR code in the manual that can be scanned to reveal a video tutorial on how to use the device, which is quite helpful. It detects oxygen levels in the blood, heart rate and temperature (with an additional probe). Everything was quite sensitive to change. Manual explained that everything is designed based on clinical studies and data. Overall it's quite a good device that serves the purpose. The only thing that's not quite convenient is that you have to look at the battery arrangement before you put them in to avoid error.

I wanted an oximeter that had large display therefore worked without spectacles. This is just about possible. I wanted to see the pulse, and to see the line of pulse since this is a good graphic for those with irregular heartbeats which with practice is as good as a portable ECG. I should have bought a larger model, but you can just about see it. I was attracted to the extra of measuring temperature. I did not check, I assumed it would read temperature from my finger -- highly misleading of course since hand temperature is usually lower than body temperature. Instead, a lead is provided, which I have not tested. What really annoys me is that the instructions are in microprint. Even when I went to the web and downloaded the manual, it is one big sheet of paper. I managed to print it as separate pages using the Tile function of my printer. How many know how to do this? Another annoyance is the beaping. There are presets, for oxygen level and pulse. The trouble is that for decades I operate aroun 90% oxygen level, so the beeping never stops. What I would like to do is to put the beaping onto the pulse, so that I can hear a heart beating. Perhaps I can do this, but the manual, even when printed, is not clear. Perhaps the manufacturer can provide a decently formatted manual, and comment below how to adjust the beeping.

Very happy with this Oximeter. Accurate and consistent. Had bought one previously from a different company which was very unreliable and constantly fluctuating (though well reviewed on here), so did my research this time. This is made by a trans-national company that provides medical equipment to hospitals and comes with a booklet detailing the research behind its algorithm and the clinical trials it has undergone. I haven't sat down to read it, but it's reassuring to know that it has been fully tested. Also comes with an instructional video for how to use it. Gives an accurate reading within around 10 seconds. Thermometer is accurate too- though a little bit fiddly. Was nearly put off by a couple of bad reviews (glad I wasn't)- turns out some people don't know how to install batteries...

Great item, bit pricey., optional parts hard to obtain.

Muy buen producto, cumple todas las expectativas!

Très pratique d’autant plus en ce temps de pandémie. On peut vérifier sa saturation en quelques secondes et le rythme cardiaque. Pour la température je n’ai pas réussi à l’utiliser. Ça reste pour pour un produit très concluant

Salvó la vida de mi esposo. Fue muy útil para informarme lo bajo de su oxigenación. Gracias

I’m impressed with this pulse oximeter. My father uses oxygen and checks his fingers throughout the day, but because he has poor circulation he has a hard time getting readings on other models. However, this brand seems to work even with cold fingers. It’s pretty accurate readings when comparing to other models, even the hospitals. I highly recommend!

Articolo ottimo e dotato di ampie spiegazioni in varie lingue, già testato e perfettamente funzionante!