SUXXAN 71-Inch White Metal Storage Cabinet with Locking Doors

We bought 4 of these cabinets and were very surprised by delivery speed because they came within 2 days when expected delivery was over a week out. Assembly was very easy if you use a drill and it does seem a bit flimsy while assembling but was solid when it came together. You will need atleast one other person but unit itself is not super heavy. The size is as described and it came with all the pieces. We ran into some issues though with one of the cabinets being damaged on delivery and some of the doors not fitting but the customer service was incredible. Probably the best service I have experienced on Amazon. They walked us through the door fix as well as offered partial refunds for the damage/complete refund for the unusable cabinet. The 3 cabinets that we assembled were exactly what we were looking for so we just asked for a replacement and they had one sent right away. Would buy again and more if needed.

After searching Lowes, Home Depot, Amazon, Walmart, Target, and the web in general I settled on this storage cabinet. I was not disappointed; I am impressed with the quality of this cabinet. It is very well constructed, and contrary to some reviews for the product, it was quite easy to assemble. I must admit I've assembled many things in my life so I have quite the experience to draw upon. I understand most folks don't like to read the directions and just have at it, but I learned in my youth: read the directions first. There's not many steps, so take the time and check out the eight or so in the assembly directions. The directions do state you will need assistance, but I just laid the frame down while attaching the sides (the second step after attaching the wheels to the base) and had no problemby myself. Just make sure you lay things down face up as the sides contain the drawer rails, which you don't want to fight with gravity. As far as any cons: only two. The first, be careful when unpacking the front of the drawers as the rear of the drawer is slid in behind the drawer rails and will easily slide out onto the floor or little piggies if you aren't prepared to catch them (this will make sense once you begin unpacking and assembling in bare feet). The second is I wish there was a top pad included. I purchased a third party one here on Amazon and trimmed it to fit. I use it for a 3D printer workstation that can store filament, tools, and what have you. Lack of lockability is not an issue for me. The cabinet also allows me to roll the printer into another more ventilated room for printing some filaments with high VOCs. There were no missing parts. Some complained in the reviews that holes didn't line up. It might first appear that way but all you have to do is reseat the parts a little and all pulls together nicely. The drawers easily accommodate storing filament spools vertically, and each drawer can store 12-13 1Kg spools. Final verdict: This is well made, solid, and is an outstanding 3D printer workstation. The construction reminds me of Steelcase cabinets from many years ago. BTW - no piggies were harmed in the assembly of this product.

Review for 71" cabinet with wheels. Ok. This thing is decent. It's not going to blow you away with amazing Bluetooth features and a hit sound track. It's a metal cabinet. On wheels. It arrived in a flat pack, decently protected for shipping. The usual Styrofoam inserts on the top, bottom, and ends. Neat little plastic corner guards that definitely did their job and some goofy aluminum angle pieces that I assume were supposed to hold things in place somewhere. All the parts where included, which is always a plus. No crappy one off tools with this unit, so you will want a decent Philips head #2 and a 10mm socket. I used a deep well 1/4 drive ratchet. The directions included were better than I expected based on other reviews. It's all pretty clear what goes where and by looking at the actual parts, how they should fit together. I built this thing solo on the floor in about an hour with wandering around grabbing the appropriate tools, disposal of various bags, cutting down the box included in that time. It's pretty straightforward. The actual assembly isn't too bad. This cabinet is made out of a pretty flexible metal. The holes generally lined up, but when it needed gentle persuasion, I persuaded it. A light push and pull would put it as it needed to be. With some decent lighting you could see how it should go. Everything is held together by metal screws, not bolts, so long as you aren't stripping it out, it's good. The material is a bit lighter than I expected, as in a thinner gauge metal. This is my chief complaint. My shelf arrived pretty dented despite the appropriate packaging. The box was fine, but there were still pretty significant bends that needed sorting out prior to assembly. But because of the nature of the metal, I was able to do so by hand. The wheels. The absolute highlight of the cabinet is the wheels. All 4 are caster wheels, so moving the cabinet around is a breeze. They bolt into the bottom. I absolutely stuffed this cabinet to the gills. Absolutely fantastic capacity. Easily moves about on the wheels even with all the things in there. The shelves don't seem bothered by the multiple gallons of oil stacked on them, or the dozens of rattle cans of paint on the higher shelves. The pegboard doors aren't really a thing for me. They would hinder the shelf storage in my case. So maybe I'm not the target market there. The whole thing is super magnetic. I like that. I like the option of slapping magnets all over it for additional hooks or whatever. Magnets like this thing. So all in all, a 4/5. Knocked off the star for being a bit flimsy and for arriving dented that as far as I can tell, wasn't a shipping issue. Easy build, good design, it holds itself together and holds all the things.

This is a great value for the money, and I wouldn't hesitate to buy it again or recommend it. I ordered this cabinet to serve as storage for supplies at our vacation home which we offer for short term stays, as we were doing a kitchen remodel that removed the cabinets we had been using for cleaning and other supplies. This was a prefect fit for the space (in picture you can see the side view along the washer and dryer, very slim profile), easy to assemble, and convenient as it's on wheels so can easily be slipped into a space in the laundry nook, and out for the cleaners to access, with wheel locks to keep it stable when in use and put away. The shelves are nice sized and spacing good. It feels sturdy, and of good quality, the metal is sturdy. I looked a few other places for similar cabinet, and didn't find anything that compared in size and also had wheels, and what I did find were much higher priced. A week or so into use, the locking bar fell out of place and into the door. I contacted the seller immediately as we really need to keep the supplies secure from curious guests. They first sent a video on how we might be able to guide the bar back into place, but I let them know that it seemed beyond our capabilities to do so. In response, they sent a new cabinet out right away, so we were able to switch out the doors very easily and got things back how we wanted them fairly quickly. I was very glad we didn't have to go back and forth and beg for a solution that worked for us, in fact the quick response of an entire new cabinet seems overly generous. It showed me they wanted to be sure we had nothing to complain about, and I appreciated that a lot. Two quick notes, the first being we noticed on the new cabinet doors a plastic guide at the top that keeps the bar in place, which was missing on the original. You might look for this and head off a problem when you get your cabinet. Second, do not leave the key in place when moving the cabinet, it can bend and break in the lock very easily if it is knocked against something.

Well made. Easy to assemble with good instructions. Well done. Will buy again

I would give it zero star if I could. I ordered 3 cabinets. All three arrived damaged in the exact same spot. It is a failure of packaging by the manufacturer. I reached out to them and they offered me $30 off. For one the one we already assembled it was a minor amount for a huge dent. I told them the other 2 were too damaged and could not be assembled. They just kept asking for pictures. No matter how many pictures is sent ( over 20) and how much communication we had ( over 10 messages) they just kept giving me the run around. Each communication took 24-48 hours. I finally had to file a claim with Amazon. Amazon told them to send me return mailers or refund my money. They made me package them back up and send the pieces of junk to them. They are over 50 lbs each. They would not do UPS pick up. They received them and almost a week later had still not refunded my money. I again reached out to Amazon who got the money moving. On top of the antics the cabinets were thin and poorly manufactured. They have misaligned holes. I wish I had read the reviews for the supplier before I ordered. Never again. Oh and yes I did go on to order similar metal cabinets from another supplier. They were nicely packaged and easy to assemble.

Takes a long time to assemble but the features, quality are really good for the price

Two side panels damaged (bent) along front edge. I was able to hammer out most of the dents. The packaging was in poor shape due to rough handling. Surprised there was not more damage to cabinet. I like the cabinet but find the pegboard inside the doors useless. Hooks protruding into shelf space when doors are closed.

L’armoire avait les dimensions que j’avais de besoin mais je la trouve de très bonne qualité, l’assemblage pour qqn pas habitué avec les plans est difficile à comprendre mais logique en même temps, très peu de vis car tout se tient ensemble. Seul problème , j’ai un amortisseur de porte qui a zéro pression dedans sinon je l’aime beaucoup.

Très bon produit je le recommande j'en ai acheter 8 comme celui-ci

Avoid this by all means. Doesn't come with instructions. And nothing fits right at all. What a waste of money!!!!!!