xTool F2 Ultra Single 60W MOPA Fiber Laser Engraver

Really impressed with this laser ! Excellent build quality and performance. I chose the single 60w version over the dual version and am very pleased with the choice. I have 2 diode lasers that are used for different tasks, one that is set up for a rotary/roller and one large format for working on pieces up to 20" x 30". The nature of the two types of lasers is the main reason I went with the single MOPA version. When working on wood the diode lasers are best suited as the pieces i work with tend to be larger than the F2 ultra would support. When working on metal, the pieces tend to be smaller and the roughly 9" x 9" working area of the MOPA laser is usually about all I need. This size can be expanded to 8.7" x 19.7" for engraving by adding the auto conveyor, however it states you cannot cut with the conveyor as it would damage the belt. I do have the conveyor but have not installed it yet, so it remains to be seen if can I put a base piece to protect the belt and cut something larger. . If you're used to working in Lightburn you'll have a bit of a learning curve as xTool uses it's own software but I've found it to be perfectly adequate. There is a huge trial and error period for learning the nuances of a MOPA Fibre over a diode, there are many more parameter tweaks to learn and experiment with to achieve your desired results such as color engraving on metal. I'm very pleased with the laser. I'd waited for one that had a larger working area and substantial power and when the F2 Ultra came along I decided to buy in. Set up and getting it burning were quite easy, tweaking the settings to achieve color and proper cutting took a bit longer but progress was reasonably quick. I've successfully cut brass, colored stainless steel and embossed brass within a few working sessions. The F2 Ultra is fairly new so the tech forums aren't fully up to speed on discussions and tips yet, but there is enough information out there to get you pointed in the right direction to help you get your desired results. I'm very pleased with the laser, it's beautifully designed, powerful, accurate and works beyond expectations !

This machine is on a completely different level. The 60W MOPA fiber laser delivers insanely crisp detail and vibrant color engraving that looks truly professional. The dual 48MP cameras and AI automation make setup effortless, and the speed is unbelievable — 15,000mm/s feels like magic watching it work. It handles metal, 3D textures, and complex designs with absolute precision. If you want top-tier engraving capabilities at production-level quality, the xTool F2 Ultra is worth every penny.

Do not buy through Amazon... To be fair I have not heard back from xtool regarding this yet but my email was just recently sent. Purchased with it showing ID have my item in a few days... Never showed... Now after we are at almost 2 weeks late (making 2 day shipping pointless) it finally shows. Below are the issues I encountered as well. I had to continue contacting my bank to allow the amount which is obnoxious for 2 weeks A rep told me they could push the payment before shipping to help me out even tho another rep said that's not possible. They said it was pushed through and my bank should clear it within 24 hours. That came and went. So I call the bank bc maybe my apps not real time info or something. Nope.. Not even listed on pending charges.. No sign of it at all. Contact again and the rep tells me yep the other rep did push it but it got stuck and I've fixed that... Was advised I'd be good after some hours passed.... Never was After not receiving it and the delayed package messages hit after a while of it just adding to the next day then the next for expected delivery. I was the told it was in a nearby distribution center here in IL. There is only one near me and it's approx 40 min from me in champaign. I was issued a small amount of the cost of the item for all the issues. Not even 10 percent of the cost. Then I finally get the shipped notification after this long in Alabama... How it could be in Alabama and Illinois at the exact same time is magic apparently. Upon the small amount offered back I asked the rep if it was late yet again would I receive more back and the response got was "yes definitely" It doesn't show for a couple more days but finally I get it. I reach out looking for the additional funds the rep promised (even have screens of this information) and was told no.. They will not allow further payment even when given when and where to check that ID been told this in black and white with "yes definitely" and they said bc of the earlier small amount given it prevents them giving more. Now mind you directly under the offer that was given I asked even with this would I get more if it missed yet another deadline and was told yes. Amazon has reviewed the chats and agreed this was a terrible experience but then follows up stating they refuse to honor what the rep said even when I offered to email them the proof so they could avoid digging. Amazon's final statement on it was there's nothing we can do you're pretty much left with return (obviously I want the laser.. I wish I could have afforded the dual laser and conveyor but I couldn't at this time) but otherwise they said yes you were told wrong multiple times they will be trained better. I had every other rep contradict the previous on so many simple things like is my payment run... Where is my item.... Very shady practices Amazon. Be warned. Now as for the product. I'm sure it will be a wonderful addition to my other machines even though this is my first venture into xtool products. I'm not even looking at that thing for a while due to the headaches and outright lies. AGAIN, AT THIS TIME I ONLY KNOW FOR CERTAIN AMAZON IS LYING AND PROMISING THINGS TO GET RID OF YOU THEN SAYING NOPE. XTOOL HAS BEEN CONTACTED BUT HAS NOT REPLIED YET. PLEASE NOTE AGAIN THAT XTOOL HAS NOT HAD MUCH TIME TO RESPOND YET. I AM NOT SURE IF THEY ARE ALSO A PART OF THE ISSUE OR NOT.. JUST AMAZON FOR CERTAIN PLEASE KEEP AN OPEN MIND WITH XTOOL UNTIL I HEAR FROM THEM ABOUT MY EXPERIENCE AS THEY DESERVE THE CHANCE TO CLARIFY THINGS AND ALSO KNOW THIS IS A BAD ROUTE USE ASE A PARTNER. All that said... Go through xtool guys.. Seriously... It can't be any worse than Amazons lies and as they put it "misinformation from reps" even tho it's been so many of them giving "misinformation" and in the end it's a tough crap customer.. Idc what you were promised.. Then have the audacity to say I'm valued. UPDATE: Amazon is trying to block my review bc they don't believe the process of receiving the item matters enough to note since others will have different experiences. Xtool has been in contact with me and we are working together about this. I have only been able to use the laser for a couple projects so far. My camera view is about a 1/8 in off from where it actually hits on the laser. This is very likely something I may have overlooked when calibrating but haven't had a chance to work on it. That said... I did a brass coin embossment and it was incredible! The built in settings for that were great! I know many say the price is their issue. I can understand that as even I wanted the dual model but couldn't do that right now financially..but do keep in mind it's not just a laser... It's the laser the enclosure the add on expansions for accessories and I didn't have to upgrade my lightburn bc the xtool software is actually really nice in my experience so far. It's very intuitive. It handles the exhaust tubing to run out n. He window or filtration system if you buy it as well. So all in all I'm giving Amazon 1 star and xtool 5 average rating.

Update* Should be fair to this little box, The camera still is not great but I should update since this machine has become heavily integrated into my workflow. I use it often. Hopefully it stands the test of time. Changed from 1 to 5 stars Not sure what is going on with this thing but I might end up returning it because the camera quality is so bad. It says 48MP I dont think it is anywhere near that. Most of the pictures come out totally over exposed and it is impossible to see anything on them. Considering a MOPA laser is specifically designed for metals and reflective materials I figured this would have been sorted out. Check the photos for comparison, iphone 17 promax camera vs xtool f2 ultra camera. Both claim to be 48MP. For reference the circle thing in the image is 7mm diameter. Camera has no adjustments. I contacted Xtool before leaving this review, their response was basically telling me to return the machine, which is kind of disappointing because I'd rather have a functional machine. Maybe they will respond here. The laser is pretty cool, the materials library is not good. I almost feel like I am beta testing their software to figure out the settings for them. The camera is almost unusable, and pretty much the only way to align your parts. Build quality is top notch.

Amazing product, the speed, the ability for to just chew through metal. It is an absolutely amazing product outstanding 10 out of 10. Highly recommend.

Defective unit. Poorly built. Sliding case did not engage safety switch. A replacement unit was requested but was also defective. The replacement unit laser did not even touched the surface.

Now that I have returned this machine I can finally share why it ended up being such a waste of time for me. Price and Expectations: This is only the fiber laser. If you are looking for the dual laser model, this is not it. At this price I honestly thought I was getting the dual version and I think many people could make the same mistake. The fiber side is powerful, but without the diode option its versatility is limited. For what it offers, the cost does not make sense. Software: The xTool software is very disappointing. The material catalog is inaccurate, so you spend hours in trial and error even with materials that are already listed. They advertise it as plug and play, but in reality it takes constant testing, adjustments, and wasted supplies. During my attempts I even started four small fires, which should not happen with something marketed as simple and user friendly. Design and Build: The hardware is the one strength. The machine feels sturdy, professional, and portable enough for trade shows. The problem is that it is difficult to use unless you already have extensive laser experience and know how to fine tune every detail. For the price, other machines provide a better balance of power, usability, and flexibility. Final Thoughts: After several days of hard work trying to master it, I was left with frustration and regret. I returned it and do not miss it.

I thought 3-D printing was fun this printer is incredible their ecosystem is much like Apple and very intuitive and easy to use. I was first about using something with proprietary software but it has been nothing but a blessing and helping a beginner get started