X-884 High Pressure Washer Gun Snow Foam Lance Cannon

Great addition to pressure washing and so far so good. No issues.

loved work for 2 years its done

This is my 1st foam cannon and am pleased with it except the top of the bottle is small and makes filling the bottle difficult unless you have a funnel handy. A worthwhile purchase and is quick and easy to assemble with quick connects on it. Lightweight and easy to use. No real instructions come with it but the video on Amazon makes it easy to understand. If you wash your car often, This is the way to go. I will be buying microfiber towels and maybe some Formula 4 spray wax to aide in less water spots.

I am impressed! No more bucket and brush. Get all the soap on at once. Used Rain X high foaming concentrate ($8 bucks for a big jug) diluted about 1 soap to 10 parts water. First get the car wet and get as much of the dirt rinsed off with the yellow pressure tip.. Then plug in the foam attachement and adjust to get the foam consistency you want. Expect to use a whole bottle of your diluted mix on the car. Love the pistol grip vs the traditional wand for ease of use - much more control! Then use the supplied wash mit to scrub your vehicle. Then switch back to the yellow tip and rinse. Be careful not to get too close to your paint using the yellow tip, but for wheels and tires close is not a problem…or you can just use a less aggressive spray tip like the white one. NEVER use the red tip on a car! Last, for those who may not know…try to do this in the shade on cool paint. You do not want to let the soap dry on the vehicle before you can rinse it off.. Other wise just wash half and half or sections at a time and rinse.

Worked really well and you can adjust how wide to spray I got to wear use this handle more than the long one when cleaning my side-by-side

In less than 8 months both the pressure washer gun and the foam cannon have failed. The trigger of the gun broke making it unuseable. The quick-connect fitting on the foam cannon has several issues. First, the o'ring will not stay in place. It extrudes out of the fitting and leaks. Also, the threaded brass insert in the back of the foam cannon into which the quick-connect fiting threads, spins in the plastic housing while trying to tighten the fitting. Very poor design and quality. Would no purchase again.

You get a nice bundle of stuff for the money and I will start by saying the bottle and gun are more convenient than what you’d normally get with your pressure washer, as far as washing a smaller car. However, there are some issues worth noting. First the O-rings my gun came with had already broken during my second use with the product. Luckily my pressure washer came with additional rings but now one of them is used for this gun. The nut that attaches the quick attachment for your nozzles as well as the nut near the hose connector on the bottom of the gun constantly come loose. These will need more than a hand tightening which I don’t think is acceptable for a fresh out of box product that has only seen two light uses. Another issue I found is that anytime I disconnect my hose it wants to take that bottom connector with it instead of just unscrewing from my gun, leaving the connector attached. I think if I take a wrench and disconnect it from the hose end and reattach and re-tighten everything on the gun correctly it will all, hopefully, be settled. The trigger lock also broke off and is now floppy and loose when reattached. The foam cannon adjuster is also backwards, I found that twisting it to the “less soap” is what gives you the most soap. I found this somewhat humorous considering I had it maxed out (or so I thought at the time) and notice it was barely shooting any soap out and I never thought to try turning it the opposite direction until I had literally checked everything else that could have been wrong. The nozzle adjustments are also either a jet stream or a massive “spray everywhere” setting with little to no adjustments in between. If you want a spray thats not a jet stream or a massive wedge, you have to very carefully adjust the nozzle and just watch how it comes out and hope you don’t turn it a tad more than it needs to be. When it all works, it works well but that’s WHEN. It all feels cheap but then again the entire thing is fairly cheap all things considered. The nozzles and mitt are the most solidly put together parts of this package of which I have yet to have any trouble with. All in all I’d say it’s better than buying an overpriced foam cannon with a Chemical Guys label slapped on to it. Everything bundled together is nice and convenient and the extra nozzles are a great deal. Just be sure to have some Teflon tape handy to keep any threads from possibly leaking, have some extra o-rings handy and have a wrench on hand, luckily all potentially needed fixing is cheap and/or free. It just shouldn’t be needed regardless.

This Spray Gun is well made and works great! And as a bonus all the extras, the foam cannon, the wash mit, and the assortment of spray nozzles are all good quality..

Bonne qualité prix et robuste fait la job

Washing the car got a whole lot easier. I'm looking forward to washing my car all the time now, it puts out all the suds. it's awesome to watch it foam all over the car.