VEVOR - Professional Ultrasonic Cleaner 10L Stainless Steel Industrial Machine with Digital Timer and Heater, Ideal for Jewelry, Dentures, Instruments and Industrial Parts,

This thing seems to work very well. I would order the biggest one possible if I could do it over but it fits most small engine carbs. I use simple green n water 50:50 and it really cleans gunk off. I bottle and reuse the solution until it’s no longer green and turned black. I’m also nervous what’ll happen to the finish if stored with solution inside overtime. Only cons IMO are If your not careful with heat/time stuff is in there it can dezink cheaper metals. I generally don’t turn heat on as much now. The liquid heats from the frequency vibration alone and turning heat all the way up+ running multiple cleanings in a row gets hotter than the highest heat setting. Not a reason not to buy it imo just be mindful and it’s fine. I also wish the timer was more than 30min It only reads Celsius which is tough in the USA It is quite loud so I generally turn it on and leave for awhile. Overall it’s hard to beat how well this thing cleans cruddy old carbs and has been worth every penny. Probably cleaned 10 carbs now and one of which would have been thrown out doing the carb cleaner/compressed air method.

This thing astonishes me every time I use it. I bought it to clean a carburetor on one of my classic cars. Used a water based cleaner from Amazon. I was amazed at how well it cleaned all the nooks and crannies. Carburetor has been back in service for seven months and not one issue as far as cleanlyness. Have used a number of times since with great results.

This things is great. I bought it to use with an ULTRA Sonic Spin - Record Cleaning Kit that holds three records at a time that sits above this tank and rotates the records through the cavitation bath. The machine heats up pretty quickly. I clean my records at a starting temperature of 25º Celsius and run until it hits 40º Celsius which gives me several hours of cleaning. I do pause later in my cleaning to let the bath cool a little between cleanings. I set my timer for 19 minutes which gives me two nine-minute cycles (two slow cycles through the cavitation bath) and one minute to play with to lower the records into the tank and to raise them back out at the end. Using this method I can clean six to nine records an hour which is how I want it (this leaves me plenty of wiggle room when the bath gets hot). You can run your Spinner much faster but this will heat up your bath faster and not clean as thoroughly. This bath has given some of my records a new life and has given every one of them a pure and clean playback. I can't recommend this bath highly enough to clean your records.

After purchasing this machine it worked for about a week before the electrics started blowing internal fuses so I sent it back for a replacement. I then received a second machine which did the same thing. On this one the company customer service team asked me to try and repair it rather than return it on the understanding that what ever happened I would have a satisfactory solution. Stupidly I agreed and we went through a whole rigmarole of stuff which was basically dragging out days. New circuit boards were sent soon and so forth. Finally I said enough I now want to return the machine and get a refund. They replied that unfortunately it was now outside the return window and there was nothing they could do. I replayed the message thread and they asked for one last time and an offer of $50 compensation for time wasted etc. I refused but they insisted and sent yet another circuit board that failed. The problem is clearly in the power supply system not the machine circuitry but that I can not fix. I have also reported the company twice to Amazon who have never answered one of the complaints. They are a poor quality company who wheel and deal in the hope that you just loose interest and give up. It has been a miserable experience from start to finish and a shocking display by Amazon. Unfortunately Amazon and the like are the future of our customer service world and it does not look good for Joe Blow.

I used this Vevor 6Liter JPS-30A exactly four times in the past year. Purchased in January 2024. Today, Oct. 25, 2025, I plugged it in, the rear power on indicator was illuminated, but the front panel as dead. No display, only a .5 second frequency beep was coming out of the interior. This thing looks brand new. I cleaned brass clock parts in it four times. It worked perfectly...until today. UPDATE: As of yesterday, October 27, 2025, after emailing Vevor Customer Support, they are graciously sending me a new "Motherboard". They said it was most likely the source of the non-functioning front board and the half-second frequency beeps that are emanating from inside. Thank you Vevor! I hope this one lasts longer than the first. Maybe a newer version board? I hope so. Hence the new rating of 4⭐️ from 2⭐️.