EZDIY-FAB GPU VGA PCIe 8ピン Uターン 180度アングルコネクタ 電源アダプターボード デスクトップグラフィックスカード用 標準タイプ(2パック) - 白

アルミ製よりこちらの方が安かったのでリバースタイプを購入、 玄人志向のRX9070XTに取付ています。今の所は無問題です。

まず白ベースの媒体でキラキラしていて綺麗なので満足です 硬めのケーブルをそれまで曲げて電源に挿していたのがどうにも嫌で(なんでパソコンってケーブル類がデフォルトだとスッキリ出来にくいんでしょうね)、それを1番の理由に購入しました 結果ケーブルを真っ直ぐ挿せるので大変スッキリしましたし、取り回しも良くなりました 心配していた接触不良なども全く無く、取り付けから大分経ちましたが元気に稼働しております そこまで高価でなく実用性もあり、かなり古いPCのドレスアップ出来ましたので満足しています

筐体が狭く、ＧＰＵ電源がギリギリで、蓋が閉まらず、慌てて購入。電源取り回しが、ボードの逆方向から行うことができ、ケースの二が閉まった。 ＧＰＵがでか過ぎ？ 筐体が小さすぎ？ 注意点は、コネクター方向が２種類あるので、購入時に注意が必要。 （間違えると、当然、つきません。）

ケース内の配線取り回しの都合で、24ピンケーブルの角度を調整する必要があったので買ってみました。 Z790+14900で使用、特に不具合は起きていません。ARGBは要らなかったのですが、最近この手のパーツは光らせないと売れないのか、光らないパーツを探すほうが難しい状態です。 コネクタ部分だけ黒なのは強度を確保するため？ちょっと目立ちますが許容範囲。 それにしても、2x6とかの新規格作れるんならマザーの24ピンもそろそろ何とかしてほしい。とにかく目立つし取り回し悪いしで、どうにかならんのかといつも思っています。

発色、見た目最高！ しかしそもそもが発熱の恐れ、発火の恐れはある💦 100のおすすめはできない 本来付けない方が熱対策になるし配線もスマート😳 しかし発色orカラーケーブル使ってデコりたい人はおすすめ🙋‍♀️ カッチョいいもの✌️

24ピン、L字、シンプルで光る 値段も手頃でこれだけで一番デカい配線がシンプルに隠せるのは非常に便利 ひとつある問題は大半のマザボが24ピンの下にはUSB3.0の19ピンがあり マザボによっては干渉してしまう この幅が唯一のマイナス このパーツは幅を取るので これだけ交換するのではなく 「19ピンのための幅の薄いL字コネクタ」も購入を検討しないと差せなくなる場合があるのでご注意 それ自体も500円ほどで購入できる 安価で対応できる欠点ぐらいしか問題がなく 内容、価格でこの変化を考えるとかなり満足

AliexpressでARGB付きの似たようなコネクタを使っていましたが、 その商品は、ARGBの端子が出ているだけで、ARGBメス－メスで接続するものでした。 ケーブル接続時にケーブルがゆるゆるですぐに抜けてしまっていました。 この商品は、24pinコネクタ本体からARGBケーブルが出ているため、 ケーブルが抜ける事なく、接続も安定しています。 LEDの粒が目立つようなこともありません。 24pin部分もツメがしっかりしているので、簡単には抜けません。 標準の状態で、電源ケーブルに負担をかけるぐらいならば、 この商品を使って、少しでもケーブル負担を軽減してあげた方が精神衛生上良いと思います。

2023年9月に購入しましたが、2025年9月になって電源が上手く供給されず起動時に一瞬電源がついては落ちるという挙動をするようになりました。仮に起動しても数分で電源が落ちます。 RGBライティングつきかつL字コネクタという事で重宝していましたが製品の品質に難ありです。

worked fantastic, worked on my rtx 3080 for about 2 years now working on my rx9070xt, don't get hot, good quality, look good for my case to make it better on the angles, very good value, and brilliant durability

It's purely cosmetic, but it looks cool. I, and you, will need to take off our back panel and refresh the PCIe 8pin cables that we just moved to tidy the excess up, but we can do that another day. I have the NVIDIA 3080 Gundam Edition, and to install one of these connectors I needed to unscrew the logo plate, install the connector, then I could reinstall the logo plate; But I think it helps it all blend in a bit better anyway. Just be mindful that you have a clear path, or can make one, to your GPUs 8pin inputs.

After checking the plug orientation, as explained in the product description, I ordered a set for a vertically mounted GPU. The plugs fit the card perfectly, and hid the power cables behind the card for a very clean look. Definitely will pick up again on a new build.

These seem to be well made and do have a bit of a design to them, rather than just a flat surface appearance. I've heard good remarks about these from others who are computer nerds, so I went with them. The only "issue" I had is that the non-reversed style only comes in a pack of two...and my 3080 needed three...so I have an extra that won't be used. <shrug> Still...glad I got them. I no longer have power cables hitting up against my glass side...not looking all that great.

Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about. As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily. I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive. If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.