Do you suffer from: Loud, dry bearings? Slow speed from supposedly ‘expensive & fast’ bearings?Good news! This 10ml bottle of skate bearing magic will breathe new life into tired bearings while noticeably increasing their speed and smoothness.Specially formulated, our bearing lubrication oil is designed to significantly reduce friction between the ball bearings and the running channel.Unlike WD40, which actually strips oil from the bearings, or grease, which creates more friction, Venom Bearing Oil is just the right viscosity to allow smooth bearing speed!Running 'dry' bearings is disastrous for the life of a bearing, that ‘whooshing’ noise you hear when spinning your wheels is the metal balls grinding against their channels. Every spin removes a microscopic layer of metal from inside the bearings, eventually wearing the race down and making them less efficient and slow. When you add lube, you instantly protect them and prolong their life.When you properly maintain your bearings they will last longer, run smoother and faster… FACT!A couple of drops every few weeks will keep you rolling faster and longer.Make sure you clean any dirt, dust and particles off the bearings first before treating them to a few drops of lube.As used in every set of Venom Skateboard Bearings, tried and d.Take your bearings to the next speed level with the Venom Skateboards Skate Bearing Lube. Review: This skate lube seems to work really well for my bearings...better than household lubes i thought would be suitable (WD40 etc) - which were not! Great value too...i didn't want to spend a lot on some bearing lube, as i wasn't sure how good it was going to be, and i'm new to skating; turns out this works really well once you have cleaned and dried your bearings. Now run smooth, and only need a couple of drop per bearing - make sure to remove shield if fitted on bearings. ive re applied a few times now as I've been skating it wet weather, and seems to hold up well. When this bottle has ran out, i'll likely get another if the price stays competitive. Review: ordered the product and got it actually 3 days prior ETA, the product is very simple to use just: 1.- clean your bearings (many methods to do it) 2.- apply the product as described on the bottles label (even does work applying 1 drop) 3.- put bearing back in wheel, take a pen and insert pen in the bearing 4.- make the wheel rotate like for 1 minute in each diection (distribution of lub in the bearing) 5.- put back in equipment. The lub from Venon is very good and i just can recomend it, did try different products from different manufacturers non did bring the same results as Venoms, if you bearings after applying Venom do not bring satisfying results, change your wheels. IN CASE YOU CANNOT OPEN THE BOTTLE ASK AN ADULT FOR ASSISTANCE!!!!
A**R
This skate lube seems to work really well for my bearings...better than household lubes i thought would be suitable (WD40 etc) - which were not! Great value too...i didn't want to spend a lot on some bearing lube, as i wasn't sure how good it was going to be, and i'm new to skating; turns out this works really well once you have cleaned and dried your bearings. Now run smooth, and only need a couple of drop per bearing - make sure to remove shield if fitted on bearings. ive re applied a few times now as I've been skating it wet weather, and seems to hold up well. When this bottle has ran out, i'll likely get another if the price stays competitive.
J**A
ordered the product and got it actually 3 days prior ETA, the product is very simple to use just: 1.- clean your bearings (many methods to do it) 2.- apply the product as described on the bottles label (even does work applying 1 drop) 3.- put bearing back in wheel, take a pen and insert pen in the bearing 4.- make the wheel rotate like for 1 minute in each diection (distribution of lub in the bearing) 5.- put back in equipment. The lub from Venon is very good and i just can recomend it, did try different products from different manufacturers non did bring the same results as Venoms, if you bearings after applying Venom do not bring satisfying results, change your wheels. IN CASE YOU CANNOT OPEN THE BOTTLE ASK AN ADULT FOR ASSISTANCE!!!!
M**Y
These improved my bearings ten fold and can now roll for upward of 1 minute. Perfect to use on new bearings to break them in and make them roll super fast and quietly. My only bad point is how little there is in one bottle. Although you only need 2 drops per bearing, after lubricating 2 sets one bottle is almost half used. But at that price, just buy two!
K**S
Seams to work, had made the bearings spin easily. Will see how long they last.
E**K
it's okay for the price. it doesnt enhance the performance of the bearings very much but it's better than no lube at all.
Trustpilot
1 week ago
2 months ago
