Master Airbrush Portable Airbrush Spray Booth Station with LED Lights, 25W Fan, Turntable & 6' Exhaust Hose, 16.5"x19"x13.5" Hobby Airbrush Booth for Painting, Models, Arts, Crafts, Cakes

I only made one mistake, I didn't buy the bigger one (for larger projects). This spray booth is awesome. It pulls air efficiently, quietly, and filters the paint overspray mist very well. Paint overspray gets trapped in the filter, and only the fumes get to the end of the exit nozzle. This was important to me, because my car was parked outside of the window and door I was venting from. I'm very picky about my car, and didn't want overspray or film to be on it. This spray booth is very brightly lit, and you can pick flaws out of what you're about to spray, before you get started...to correct those and see every detail. I can't find any faults with this booth. I would buy it again in a minute if I needed another. I think it was worth every penny for what you get out of it. As I said, it draws air very well for airbrushing or spray painting models or just blasting dust off prior to paint application. You can see the mist getting pulled out of your way. I was spraying model lacquer, and that is some dangerous stuff. Make sure you wear a quality respirator. After you're done spraying, leave the booth on a little longer to draw out any remaining fumes from the paint drying out of the room. I am really happy with this booth. It was easy to assemble, set up, and break back down for storage, but I have had so much fun with it, I might just keep it up all year. If you travel, it is easy to pack up and take with you. It is a reliable, dependable, easy to use and well built portable spray booth. Cheers!

Great. Does the job

I've gotten into airbrushing as a hobby, and another one of my hobbies is 3D printing. Sometimes, to use up old filament, I 3D print decorative objects to give to family and friends. Recently I discovered I could give old, unwanted 3D prints new life by airbrushing them. It's often windy where I live, and I don't have a way to set up a reliable airbrushing workspace outdoors. So, I looked into small booths and decided to try this. This booth fits my needs almost perfectly. I'm one of the not-so-smart folks that doesn't wear a respirator, so I really wanted a booth that moved a lot of air. Between this booth's ability to do just that, and it's portable nature, I'm very much satisfied with this booth!! I have a glass top art desk, and the top can be tilted up to act as an easel of sorts. I'll tilt the top up for some painting and airbrushing on paper/canvas, then lay the top down flat for pencil/pen drawing, or for this booth. Setting up the booth is fairly easy and doesn't take long, and since my art desk is in front of a window, I can save the filter for next winter and use the included duct hose to rout air out of the window. With this, so long as I keep my airbrush and chemicals inside the booth, I get zero fumes. The booth does a great job at evacuating the fumes into the duct hose and out of the room. If I have any complaints about this booth, it's the lighting. Unlike other reviewers' experiences, the lighting in my booth is clear. It's not yellow or blue tinted. But, it's so bright and focused, it causes washout. It can be really difficult to airbrush small patterns and spaces on my 3D prints due to the intensity of the booth's lighting. For the price and other features of this booth though, I'll live with it and I'm glad that for once I'm not complaining about lack of lighting. I didn't think I'd appreciate this booth's portable nature as much as I do. It's so nice to set this up on my art desk for a few weeks to airbrush 3D prints, then completely take the booth down and set it aside so I can tilt my art desk's top up for some painting. The packed booth doesn't take up much space and is easily moved and transported. One nuance that intrigues me is that this booth runs on 12 volts. So, with fabrication of a proper lead, one could connect this to a 12 volt battery for power, allowing this booth to be truly portable and used even when there are no wall outlets nearby. But I'm starting to digress here. If you're looking for a portable airbrush booth whose features will work for you in a similar way as they have for me, then this one is very much worth considering!

Great product overall, however could use some improvements. Pros: Description accuracy: does what it says. Portability: folds up reasonably well but there is room for improvement. (Would love if the led lightbars could be stowed inside when folded as well) Light: the three light bars provide excellent light and are easy enough to install. However not as easily removed (more on that below). Cons: 1: while the majority of the product folds up beautifully (main unit, power cord and turntable all fit into the unit. The power cord even has it's own pocket built into the unit with a door that closes it inside). However, the led bars must be disassembled and removed and, from what I can tell, don't seem to fit into the unit when it's folded. The air ducts are also kind of difficult to collapse for travel. 2: build quality. Build quality is superb in most places but has some glaring issues in others. During my first use this unit drew blood during disassembly for storage. In my case, it was while removing the led light bars. They hold in tight, and required some force to remove. When they finally gave way, some sharp flashing on the plastic took some skin clean off of my knuckle. Definitely inspect your unit before assembly and disassembling identify potential sharp points. If the kit works the way you like, I would recommend sanding these sharp points down for safer assembly and disassembly. (Do not do this if you decide to return it, obviously). 3: noise. This thing is VERY noisy. I could hear it running from my 1st floor entryway and even from outside. Since I paint mostly at night, this may end up being a problem. This could be solved by having air ducts that don't have as much robbing inside (hopefully reducing some of the turbulence in the airflow) but then you lose the portability provided by it's ability to be collapsed. This also could be helped by an additional speed setting or two from the fan, im not always using rattle can so having a couple other speed settings that sacrifice airflow for better noise levels would be nice while I'm airbrushing. (This thing is noisier than my compressor) Overall, great paintbooth design with lots of potential. I hope they improve on the build quality so there is less plastic flashing left over from the main process on the light bars and opaque side and top panels that make up the shroud. (Otherwise, I recommend sanding or filing these down if you find the unit satisfactory as-is and don't plan on returning it). Would also love a better fan that is quieter and or multiple speed options so noise could be compensated for in situations where the max airflow isn't needed.

Bought one a while back, lost it due to moving. But it's a very good product for the price. Lights are bright and the vacuum works great

Great spray booth. It breaks down into three pieces (main compartment, charge chord, light w/foldable sides). For storage, while not using it, the charge cable can be stored inside the main compartment but the light w/winged sides doesn’t fit inside the main booth/compartment. Light and fan work great. However the fan is a little loud. It doesn’t bother me but that may be an issue for some people.

This thing is perfect!! Just pull it out of the box and it’s ready to go!! No assembly headache at all, light weight, seems durable, great size and overall design! Well engineered product that doesn’t take up too much desk space and functions as described. Fans not too loud, lights are bright but not too bright.

Great item! Actually bigger than expected. We've ordered things here and when they show up we're like "Wow it's tiny". Not the case here. Dual fans remove paint on a hurry. The extra long exhaust hose helps to get to the nearest window. The only negative is that the exhaust connection to back of booth is weak and requires duct tape to seal and keep securely attached. The unit has some volume but on not annoyingly so. Great value because my lungs are worth it!

Was looking forward to use the spray booth and start painting my models. Unfortunately, the LED lights do not work as planned. The instruction manual is quick and concise but does not tell you the entire operation of the spray booth. When I plug the connector to the master On/Off switch and the other connector to the LED lights, the fan will not start unless you press the light switch button (and there is no On/Off indicator) which the instruction manual does not tell you. Then I find the LED connector plug is actually quite loose which I believe is a contribution to the LED lights not working (due to perhaps faulty design). Instead of fiddling with this, I just retuned it and will look for another spray booth.

Good product, don't take much space. good look too !!!

Se puede observar que es de calidad

El producto funciona muy bien. El primero que pedí llegó dañado y con piezas faltantes, pero el proveedor lo cambió sin problema alguno. El segundo que llegó lo hizo en perfectas condiciones.

Excelente producto un "must have" para modelistas, el proveedor excelente, lo hizo llegar antes de la fecha establecida +1000