H9 Flow - Dual-Chamber ATX PC Case - Black | Dual-chamber ATX flagship with 4 included fans, 420mm top and front radiator support, and wraparound tempered glass.

Case has so much space. So much built in cable management. The aesthetics are great. Wonderfully open case for airflow and installation was incredibly easy. Got this on a sale and the value is incredible. Build quality feels top tier.

Phenomenal design. So much room, the dual-chamber design is very convenient for cable management - and the spacy main chamber made doing a water cool loop GPU+CPU with two 260mm reservoirs + 360mm radiator fairly simple and turn out beautifully. Could even fit another 420mm radiator on the side if I wanted to, but already getting incredible thermals. My number one recommendation for someone doing a large loop. Was also able to run a drain tube to the cable chamber.

Purchased from Amazon refurbished and it is in mint condition! Plenty of space for any future upgrades! Space to add tons of fans and seems to be built extremely well! This case also does not have an overwhelming amount of rgb which is what I was looking for!

Plenty of space and excellent cable channels makes it a joy to do a PC build with this case. Case fans can be strategically mounted anywhere other than the panel doors to maximize air flow including case bottom. I am however deducting a star for the brain cramp decision to locate front panel connectors and power button at the bottom of the case. What were they trying to do, save a few cents on FP wiring length? It makes no sense. It is a major PITA to deal with these limitations. Unless you want to crouch down every time the connectors would require extension cables. The power button would require some sort of stick (I use a ruler) to reach it. Overall a good product, but NZXT did not think the front panel issues through.

Do not spend the extra on the RGB case, just get some PWM (4 pin) fans. This case was shipped with 4 fans installed and ready for connection, i ditched them after they were too loud, i bought some Be Quiet PWM fans, 6 140mm (3 to replace the front intake and 3 to install on the base) and i also bought 1x 120 PWM fan from them as well for the rear exhaust. I also have a Artic PRO 420mm (3x140mm fans attached) AIO for the CPU that covers the top exhaust, this is overkill in size but covered the entire top panel which is what i wanted. This case is great, it was super easy to work with and assemble everything. The tower is sturdy and no complaints on the design. I posted a pic with the side panel off where you put the PSU in, that bracket unscrews and swings open for even easier cable management. 2.5 SSD drives are located under the PSU and hidden from normal view, they attach to the box in the photo of the case taken apart. You do not need racoon hands to work with this case. It seems to have decent filtration and is easy to take apart to clean, i may make a custom screen for the rear under the exhaust fan where it is open but that seems to be the only spot. To use those Be Quiet fans you need to enter your bios and make sure the PWM setting is active on all used slots on the board, then if there is a smart tuning option (Qtuning or similar) use that for it to find its sweet spot for fan speeds on load. I used this and no longer sound like a chinook helicopter when playing Cyberpunk or editing video. That all said this case is a chonk, it weighs a decent amount and takes up some room but is expected to have some of these features. When built running 9950x3D with 4070ti and Asus X870E-E board.

Seems to be a high quality case. Pretty solid and plenty of room to build inside. Airflow is fantastic with all these fans

Tons of room to work with or it may be a little big for where you want to put it. This is my first dual chamber build. I absolutely love the airflow but I had to reorganize everything just to make this thing fit. I saw the numbers on the spec sheet but the overall size didn't sync in until I tried to set this guy in place. This is very solid and well-built everything I've come to expect from NZXT. Their towers have been three out of five of my last builds for a reason. This isn't specific to the brand or this case but the only thing I want to change are the fans. That's only because I am a Noctua fanboy. In stock configuration and it really does have great cooling and runs fairly quiet. The instructions were clear and the design allows for very clean cable management. You can't go wrong with NZXT put this one true the impressed me.

reviewing the NZXT H9 Flow (2025) This is hands down the best case I have ever used. I have been building my PCs for over 40 years, and while the Corsair cases have been really well made easy to work on, the one my RTX 5090 is in was too densely packed to allow enough air flow. I had my system reboot several times while playing Cyberpunk 2077 because the GPU was running too hot. I decided to get the NZXT case because it has so many fans and lots of space inside for air to flow through. Installing a new motherboard was made easier because there is a little nub for the middle hole in the motherboard that makes it line up to the opening for the ports. There's enough room to top mount a water CPU cooler without the fans overlapping the board. The power supply sits on the side instead of the bottom, and that makes running cables much easier. There's lots of space behind the motherboard for hiding and organizing those cables too. Because the case fans are angled and to the side, my mammoth GPU has plenty of room around it for air flow. The only quibble I have is the fact that there is nowhere to put a GPU support. I had to settle for making the screws holding the GPU to the case very snug. I'm obsessive about fan noise, so I am seriously considering replacing the fans that came with the case with some Noctua silent fans. They aren't bad, but they are louder than my Be Quiet! CPU cooler radiator fans which run less than 25 db most of the time. Their even louder than the 5090's fans, which run quietly even for games with intense graphics. Highly recommended for builders.

massive case you will literally never need a bigger case if you get this one

First off, this is a BIG case. Solid case. Great build; clearly didn't skimp on the materials used. Lots of attention to detail. EVERYTHING has a place, everything has space. - Power supply location is a lil unorthodox, but in the grand scheme of how everything is laid out, it works perfectly. - Detachable 3.5" hard drive bay to pre-mount your drives and it legit clicks back into place with JUST enough room below the power supply mount - 2.5" hard drives are mounted on the swinging hinge on the "back" side of the case. Again, unorthodox location, and if you're using those mounts, you'll wanna cop some longer SATA cables, maybe, but it works! Still keeps everything nice and clean, and adhering to the "everything has its place" mentality of this case. - Cable management slots are JUST the right size to keep all your cabling clean on the front side of the case, and they've provided as many slots as they could for flexibility with how you wanna run your cables and keep them neat. Well worth making the space for it if you want more spacious build, whether RGB or no RGB.

- A case that is worth every penny! • It supports up to 10 fans. • Any graphics card will fit inside. • The airflow is excellent — in my case, my graphics card (Gigabyte 5080 Gaming OC) does not exceed 60°C under full load with the case fans (10× Lian Li Uni Fan) running at 1000 RPM. • The case looks very beautiful with the right components and proper RGB lighting. • It is quite heavy, but there is a lot of space for cable management behind it, and there are also special mounting points for securing the cables.

O primeiro ponto que chamo atenção é para o fato de que este gabinete é inteiramente produzido no aço SGCC, que é uma liga de primeira linha, bem mais resistente a efeitos de oxidação, incluindo maresia. Se você mora em local interiorano, provavelmente isso não irá enferrujar por 1 década, se você mora na maresia, será necessária manutenção preventiva (pintura, para proteger a camada de zinco que oxide), porém ainda assim te dá muito mais longevidade. Um gabinete inteiramente construído com este aço não é pouca coisa. O segundo ponto é que ele é extremamente espaçoso, não sendo à toa que cabe placas mãe ATX. Mesmo com uma ATX, você ainda terá muito espaço para fazer sua instalação. O compartimento duplo realmente faz diferença, pois o local onde você poderá gerenciar seus cabos é muito espaçoso, havendo grande espaço para você pensar na sua organização. Aqui, você pode até mesmo deixar de pensar em como organizar baseado em "qual espaço cada coisa encaixa", para organizar baseado em "como ficaria mais bonita essa organização de cabos?". Vem vários instrumentos de organização para te ajudar: já há vários velcros (bonitos) pré-instalados vertical e horizontalmente, bem como vem velcro adicional, além de enviarem os cabos "enforcadores", o que demonstra que a marca está realmente considerando os usuários que querem organizar bem o seu setup. O terceiro ponto é que ele já vem com ótimas ventoinhas pré-instaladas, sendo 3 de 140mm e 1 de 120m, de modo que já tem dá um air flow básico, com 3 ventoinhas de ventilação e 1 de exaustão. O quarto ponto é que você tem espaço para muitas ventoinhas, eu particularmente vou ficar, no fim, com 10 ventoinhas, sendo 6 de ventilação e 4 de exaustão. O posicionamento das ventoinhas "frontais" é bom, pois ao mesmo tempo que, por não estar exatamente na frente, permite placas de vídeo grandes serem facilmente encaixáveis (com suporte para ela), isso ainda aponta o vento diretamente a placa de vídeo, na diagonal. Para ter certeza que você pode instalar ventoinhas na parte de baixo, mesmo tendo uma placa ATX, a NZXT ainda inseriu um "compartimento porão", em que as ventoinhas da base são encaixáveis e, portanto, mesmo que a GPU seja grande, ainda assim você poderá colocar ventoinhas embaixo, com ótima distância entre ventoinhas e GPU. Essa base conta com uma tela mesh removível, que permite uma grande entrada de ar e facilidade na limpeza. Ele tem acessos para passagem de cabos muito convenientes, de modo que você consegue instalar seus cabos de maneira confortável e mantendo uma discrição visual. Não há absolutamente nenhum trabalho para organizar os cabos, pois o grande espaço e a localização dos acessos facilita demais a vida, de modo que você para de pensar no que "dá para fazer" e instala rapidamente ou, no máximo, pára para pensar apenas em como fica mais bonito. Um detalhe: ele é bem pesado para um gabinete (o tipo de aço contribui), pesa pouco mais de 12kg, então dependendo do material e espessura de sua mesa, será arriscado deixá-lo em cima. Então, leve isso em consideração antes de comprar: onde quer colocar. Ele não caberá em suportes comuns, diante do design dele (é muito largo), e suportes comuns possivelmente não dariam conta do peso dele. Enfim, recomendo bastante e considero que o preço é muito justo para a qualidade do produto!

Muy buen gabinete calidad precio, MUY ESPACIOSO, excelentes materiales, mi amigo es técnico y me dijo que tiene todo muy bien distribuido, realmente me sorprende lo premium que puede llegar a sentirse y lo "barato" que es. Pondria imagenes pero no tengo mi pc a la mano jsjsjs