Furniture Clinic Wood Stain (Walnut) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 2.5L

Great product. This wood stain is excellent. Easy to apply & quick drying. I used 2 coats & the finish on the bannister was perfect & it also goes a long way I still have plenty left over. For any future jobs I would certainly buy again. The price was excellent as well.

The necks of the bottles aren’t long enough to seat into the seal at in the too long caps. All were leaking but only slightly. They continued to bubble out stain as they warmed up after transit on a cold day. I washed the lids and the threads of the bottles and kept them upright. Not a major problem and nine colours of stain was a good price. I’ve tried them on some wood offcuts and the colours are great. It might be blotchy on cheap softwood but good coverage on hardwoods. Obviously stain alone cannot turn plywood into rosewood. Best applied with a pad. Easy to blend. Excellent for my model boats. Shame about the bottles but stain was good wuality

Excellent product, whilst it’s a small amount it’s very thin so you don’t use a lot as it covers easier and so goes far, I poured it into a tub and applied with a brush and it didnt go on streaky! Pleased with the colour I would say it’s a caramel colour once on, which pales once dry! Bought another bottle as I used it all on two doors both sides, have one more to do so will have half left for touch up if needed or when redecorating, would recommend!

This stain product far surpassed my expectation. I have a wood dining table with wood veneer top that had previously had the liquid from a reed diffuser spilt over it. I’d tried various methods to cover it, but because of the finish of the wood, nothing I tried covered it. I tried this Furniture Clinic Stain as a last resort, but the results I achieved with just one coat using the recommended sponge brushes was amazing! It has totally revamped my table and it genuinely looks like it did when I first bought it. The before picture does not do justice to how marked and damaged the table was, but the picture of the table after a full coat to the whole of the top has achieved a fantastic finish that was so easy to apply and dried very quickly. I purchased the 500ml and I’ve only used a small amount to cover a 6ft table, plenty left over for retouches if needed in the future. To ensure it is sealed and protected I have just purchased their beeswax polish to help the surface endure daily use. I would definitely recommend this excellent product.

Restoring wooden floors in old Victorian house, some of the floor boards been replaced with new boards so wanted to get them same colour. When stained new boards looked exactly the same colour as original 100year ones, was over the moon. Having that said as soon as I applied hard wax oil original untreated boards gone darker and stained stayed the same. I guess you need to choose finish which does not soak into the material, presumably like clear lacquer or so. Either way, brilliant product hence it got colour match 100%, just need to make sure you chose right finish. Oh and I’m about to buy more just for different project! ;)

Arrived quickly, perfect colour match, easy application

The wood stain is fine. We chose Teak to adapt our light coloured pine furniture and make it darker, so that it fits better with our mid century furniture. It took 3-4 coats to get it to a satisfying result. We thought it might be a bit more intense, especially because we used it on very light and untreated pine. But it took ages until it was even visible. So the end result is nice, but it took some time and patience to see any results. The first layer was basically invisible, so don't give up if that should happen to you too. A few more coats and it will show the colour on the bottle.

Easy to apply and the shade was perfect for my coffee table which has a light oak marquetry top. There is a QR code on the bottle and I just basically followed the instructions provided on the website. Prior to using the stain, I tried sanding the table top by hand, but it wasn't enough and I had to resort to using a mouse sander to get the old finish of the top. Then, using 120 & 80 grade sandpaper, I took it down to the bare wood as there was also old cup stains to sand away. I then applied 3 coats of stain, using a rag, and so far I've applied 2 coats of varnish (Ronseal quick dry), but I will probably apply another coat. For a few hours work, the table looks amazing! I have posted before & after pics. The quick drying time is definitely a plus, and as long as the old varnish or wax is sanded away, it applies evenly and dries lighter to a nice, natural light oak finish. There was also no overpowering smell which was a bonus. Best £10 I've spent in a while! Highly recommended.

facile a poser , la teinture est impecable, sèche vite.

Bonne qualité et bon rapport qualité prix.

Conforme parfait.

Très bon produit

Tres bon résultat avec une seule couche sur du pin . Enleve l'aspect trop jaune du bois.