Shintenchi 5x3 FT Outdoor Storage Shed with Window, Lockable Outdoor Waterproof Tool Storage Sheds, Weather Resistant Tool Storage House Shed for Garden, Backyard, Patio Utility and Tool Storage,White

Great little shed, it just takes a very, very long time to put together if you do it by yourself. I imagine if you don't follow the instructions *exactly* it would take even longer. Had to re-drill some holes in plastic parts - that lined up with holes in metal parts - that were not drilled at all to begin with. Also, some screws in the area where the door slides have to be backed out pretty far for the door to be able to slide. However, it is possible to put together as one person with only hand tools and a stepstool because that's how I did it. For the price, this is a great little shed for a patio or - in my case - the side of my driveway. It's very sturdy for a small metal shed, no leaks and it didn't come dented or anything. It looks very nice when all put together and I've gotten quite a lot of compliments from my neighbors.

Decent for its price. It's hard to put together, they could have used less pieces and made it easier. It's a tin shed. I put it up against a wall to stabilize it from the wind.

Great little (3 x 5) shed. Love the window. Seems to be plenty sturdy. Took us several hours to assemble - a LOT of small screws. They give you extra - good thing because we dropped a number of them. Instructions were pretty good, but be careful to get the pre-drilled screw holes in the correct orientation to avoid taking it apart and repositioning :)

You get what you pay for and there's good reason why this is the cheapest shed on Amazon. For starters, the panels are metal in the same way that paper mache is wood. Look at them wrong and they'll bend, but don't worry too much..they'll come pre-bent, especially the doors where everyone will notice the damage within the first 30 seconds of seeing the thing. The instructions are abysmal as usual, so allocate some time for redoing things as you will inevitably have a panel upside down or miss a few screws and have to come back later to fix the issue. Also, every last piece of metal in the box is covered in that cling-wrap plastic, which will take you HOURS to remove. I'm not elaborating. I spent 3x the time peeling the protective wrap off the parts as I did actually assembling the thing...and assembly wasn't quick! For all the trouble the cling-wrap will give you, you'd think it'd do a better job of protecting the parts from scratches, but it doesn't. The final straw for me was the major design flaw that means the doors cannot open or close. The door rides on some plastic wheels in a metal track, like many closet/pantry doors, but way cheaper. The problem is that the roof screws into the top of this track, causing the screws to block those plastic wheels from doing their thing. So right now I have the screws backed out, which means the roof isn't really attached up front. So which do you prefer? A working roof or a working door? Can't have both. I'm demanding a refund and if they want to come get their shed, they can. Otherwise it's going to the dump next week. Save yourself a headache and waste your time doing something fun.

Not the best or biggest shed but it does what I bought it for which was to hold all my garden tools, it is very flimsy but it lasted through a Michigan winter.

The instructions were really confusing and I've put together IKEA items before. It was a pain to work with and the quality it okay. I'll admit I didn't look closer at the details but THERE IS NO FLOOR. Just in case you wanted a shed with a bottom like we did. Hole alignment was off because the pieces were mislabeled. Had to take apart and switch pieces. Some of the plastic pieces at the end didn't fit well.

The item itself is okay once you put it together but therein lies the problem it is probably the worst engineered thing I've ever put together and I've put together a lot of stuff all the furniture from Ikea lots of furniture from other places kitchen cabinets etc the instructions are big and hard to read doesn't tell you what order to do the steps in on each page it's just a diagram and the screws provided should have been a quarter of an inch longer. They're too short and make it very difficult to insert and I'm not an amateur but this thing took days to put together for me it would have been a lot easier if you have two people every step of the way but not everybody does

Works well, but examune evry step of the directions. Multiple reviews when I purchased said that some of the holes didn't line up. What I found was that they all lined up, butonly if you had everything assembled correctly AND IT WAS VERY EASY TO OVERLOOK TiNY DETAILS and therefore have a part backwards or upside down. So take your time, study each diagram, and be careful, and it will all go together just fine.