ARCTIC 「Liquid FreezerⅢ 360」水冷CPUクーラー 高静圧Pシリーズファン付属 38mm厚ラジエーター LGA1700 AM4/AM5 対応

買ってから1ヶ月が経過したけど特に問題はなく稼働してます ryzen9800x3dに使いましたが良く冷えてて大満足です 音に関しては凄く静かで全然音が気になりません 仕様書には書いてるのですがヒートシンクが少し大きいのでそこだけは注意した方がいいです。 あとCPUに付けるポンプが取付しにくいのでそこも注意した方が良いです

評判通り、静かです。 無音では無いですが、殆ど気になりません。 取り付けは、マザーボード上部のコネクター類と ファンのクリアランスがギリギリ！ メーカーHPて取り付け可能であっても、かなり狭いので注意が必要かと。 冷却性能は、満足です。

Easy to install and seems to be doing its job

Ryzen7 9800x3dとASUSのb650plusM/Bの組み合わせで取り付けしましたがとにかくブラケットへのネジ締めが固すぎる。 銅板のついた本体はネジ締め部が若干湾曲しておりネジを締めると平らになるようできていますがネジの長さが足りないのかブラケットのスペーサーの高さがあってないのかパーツをつけても高さが足りない、私はブラケットにワッシャーを挟み込み高さを上げしっかりとCPUにくっつくようにし、それでも湾曲部が非常に固く取り付けにはかなり時間がかかりました。 また本体のファンは試した限りでは交換不可です。 光らせたい方は他の簡易水冷、ファン交換可能の物を選びましょう ただ冷却性能に関しては非常に高くCPUに高負荷をかけても70℃までは届きませんしファンの風切り音もかなり静かです

よく言われるポンプの音が不安だったが静かで殆どしなかった 他社製と違いVRM冷却ファンが付いてるのでCPU周りが過熱することもなかった 日本語サポートでの保証は代理店2年のみだが英語で本社に問い合わせれば6年保証してくれる 9950X3Dも問題なく冷やせていておすすめです

I replaced and NZXT Kraken AIO with this. On my old Kraken, I was using Noctua fans and Artic Freeze 6 paste. Switching to the Liquid Freezer I discarded the included fans and replaced them with my Noctuas. My AMD 5950x dropped 8 Celsius at idle, and during load 5 Celsius. This is an amazing performance change for just switching to a different AIO.

良く冷やしてくれますが、制約がいくつかあり、それに抵抗がある場合はやめたほうが良いです。 インテルのCPUの場合にはマザーボードのCPUの元の留め金を外して付属のCPU本体の取り付け台に付け替えないとダメです、すなわちマザーボードの保証が効かなくなります。 次に、ラジエターが分厚いために、色々な部分に接触する可能性と、はなからつけられない場合があります。 必ず要確認を。

取り付けにくいでかいだけのゴミ

I recently upgraded to the Arctic Liquid Freezer III 360mm AIO, and it’s easily one of the best cooling solutions I’ve used. Right away, I noticed the build quality—everything feels sturdy and well thought out. The pump design is unique compared to other AIOs, and I like that it comes with a small VRM fan built into the pump housing. It’s a smart addition that helps keep temps balanced across the board. Performance-wise, it’s been excellent. My CPU temps dropped significantly compared to my previous cooler, even under heavy gaming and rendering loads. The 360mm radiator with Arctic’s fans moves a ton of air while staying surprisingly quiet. Even when the fans ramp up, the noise is way lower than I expected for this level of cooling. Installation was pretty straightforward too. Arctic’s mounting system is simple, the tubing feels durable but flexible enough to work with, and I never felt like I had to force anything into place. A big plus for me is how clean it looks inside the case. The all-black design is sleek and minimal, so it doesn’t overpower the rest of my build. It feels like a performance-first product that doesn’t need flashy extras to stand out. Overall, the Liquid Freezer III 360 delivers on everything I wanted—excellent cooling, quiet operation, and reliable build quality. Arctic has a reputation for efficiency and value, and this AIO definitely lives up to that.

I upgraded from a 240mm Cooler Master to the Arctic Liquid Freezer III 360. With this new cooler installed, my Ryzen 9 5900X now runs 10 degrees lower and has a more stable idle temperature.

Tengo un Ryzen 7 5800x procesador bastante calientito, lo enfriaba con aire con un DeepCool AK620 y la verdad no iba mal, la temperatura en juegos se mantenía en 80 grados celcius y en sesiones de trabajo si llegaba a los 90 grados, entonces vi que este enfriador líquido acababa de salir y que su antigua versión había sido muy buena y decidí probarlo. Y pues la verdad no hubo mucho cambio, las temperaturas bajaron entre 3 y 5 grados ya con la curva de enfriamiento ajustada, el ruido cambio eso si no tiene comparación esta madre es mucho más silenciosa qué un enfriador de aire. Una cosa que no tome en cuenta fueron las medidas, me confíe por que tengo un Corsair 5000D y pensé que me sobraria espacio y no fue así, el radiador no entro en la parte de arriba, choca con los disipadores de la MB entonces tube qué colocarlo en la parte frontal usando métodos de ajuste a la Mexicana y quedo perfecto, tons el consejo es que revises bien las medidas sino quieres tener problemas de instalación. Cha-chauu...

I recently purchased a Liquid Freezer II 360 with the intention of installing it on my 13900K main system here, but a month later still not got round to doing so, when Arctic launched this week their updated Liquid Freezer III AIO at an unbelievable price. The price alone for the LFIII 360 was what made me purchase it in all honesty, even if I have an unopened LFII sat here, but I am glad that I did! No longer do I need to undervolt the CPU or restrict power limits to the CPU to keep temperatures under control (although if you play games that use the Unreal Engine 5, you may still want to do this). Running Cinebench R20 (which puts a load on the CPU much higher than what 99% of applications or games will) on the 13900K will almost automatically send the temperatures up to the thermal throttle limits within a few seconds of starting the test, but with the Arctic LFIII installed, temperatures have not even approached anywhere the thermal limits of the CPU, therefore it does not throttle & stays at full turbo speed for longer. With the CPU overclocked to 5.9Ghz all P-Cores & 4.4Ghz all E-cores, a maximum temperature of 82C has been experienced with no throttling what so ever. Before with a Noctua NH-D15 (one of the very best air cooling solutions available), 100C+ could be reached within 2-3 seconds of starting the test causing the CPU to throttle back by upto 300Mhz during the a single test run or more if you are running it for a longer period of time. During game sessions, I have yet to see the CPU temperature on any core get higher than 63C and not had the fans spin up any more than about 40% of their maximum speed (no change in noise basically with the fan curves I have set). There is one drawback though which stops me from buying more of the LFIII units & that is that it is not compatible with ANY other Intel sockets than LGA1700 (12-14 gen) or the upcoming LGA1851 that is going to be used with newer generations. That means if you have a i9 9900K/10900K/11900K (or any older socket platform), you cannot make use of this cooler. I feel Arctic are losing out on sales because of this as it is obvious that the cooler can be used with the more traditional style mounting solutions as they use this with the supplied AM4/AM5 mounting kit. For the sake of an extra £2-3, Arctic could have provided a mounting solution for LGA115x/2011 and still be cheaper than virtually every other AIO brand on the market. Same applies with the tiny amount of MX6 thermal compound supplied with the cooler. This is a one time application and with contact frames having to be torqued correctly to make sure that all memory channels are present (if overtighten the screws or not provide even pressure on all sides when tightening it down for the contact frame you run the risk of some pins not making a good contact with the CPU) & if you find after installing the cooler that half your memory is not available or system is unstable because of this, you will need additional thermal compound to be able to remove the cooler, reseat the CPU & frame, then reattach pump block. Putting a 2g syringe of MX6 in (£3 if sold separately) still will have the package much cheaper than other available (this is something that should be aware of & have to hand just in case if you have not fitted a 3rd party contact frame before or seen any of the YouTube videos talking about them). In short, tighten the screws 1 turn at a time working in a X/star (top left, bottom right, top right, bottom left, repeat) pattern until the thread bottoms out under 2 fingers turning the screwdriver - DO NOT OVER TIGHTEN! I haven't even mentioned the other benefit of having a fan mounted on the block that cools the VRM’s on the motherboard as well which is silent even at full speed. Unlike other similar VRM cooling solutions built in to an AIO, if it fails, it it can be easily replaced without having to dismantle the whole system & pump block by simply lifting off from the pump as is connected by 2 magnets. Power to the VRM fan is provided by pogo pins on the pump itself that make connection to the fan motor when the magnets engage. You also get a choice of mother board connections as well - two cables are provided - one with a single 4 pin PWM connector that powers the main fans, pump & VRM fan together with a single PWM curve or a 3 way PWM cable (fans, pump & VRM fan) for setting individual PWM curves for each part individually (ie run the pump at 100%, steeper curve on VRM fan & a flatter/steeper curve on the main fans). Regardless of which solution you choose to use, the 4 pin ribbon cable is the same size for ease of cable management. Other than the 2 minor issues that buyers could run into, every thing else I don’t think can be beaten for performance, let alone the price, unless you go full custom loop water cooling (which is going to cost a LOT more than the LFIII does!). For any new machines that I build going forward, the Arctic LFIII will be my first choice of cooler for them as you get all the benefits of a top end liquid cooled cooler at the price of a mid-priced air cooler. If you want/like RGB, then there is also an A-RGB version available for roughly £10 more than the non-RGB version, which when compared to other AIO’s available is still around half the price of other brand equivalent in performance!

impressive product works very well and very low noise