All Metal 29 Inches Sprayer Wand,1/4" & 3/8" Brass Barb Sprayer Wand Replacement, Stainless Steel Sprayer Wand with Shut off Valve & 2 Hose Clamps

works great

Just installed and used this all-metal spray wand today. It performed very well. Only problem is an inadequate seal where the hose barb at the inlet screws into the valve body. This leaks under my pump pressure (80 to 90 psi). Some teflon tape on the threads helped, but still get intermittent fine spray out of this joint. Should have an O-ring seal, but there is no internal shoulder to seal against. Nonetheless, this is head and shoulders above the quality of other spray wands I have tried that are made from molded or injected plastic. Further experience reveals that the pipe between the spray valve body and the nozzle is a press-in fit with no restraint on either end other than a tight friction fit. Under my electric pump pressure of 80 to 90 psi, the pipe is gradually pushed out of the fitting and blows out of the valve body or the nozzle blows off the end. A quick field fix was accomplished by installing a hose clamp tightly on the pipe at each end and wrapping form wire around the pipe and the opposite end of the fitting into which the pipe is pressed. This restrains the pipe from moving out of the fittings after the loop form wire between the hose clamp and the fitting is twisted tight. The adjustable nozzle on the wand allows rapid adjustment of the spray pattern between close-up spot spaying and more distant targets, supporting accurate application of spray at various distances, even in a light breeze.

Nozzle was crappy and the wand leaked.

Does not work

Really nice sprayer wand. Replaced broken plastic wand. This is a Very well made, wand. Works great, like the adjustable spray. Available in many different lengths. Sure you can find one to meet your needs. Also was delivered quickly. Recommend this wand. Comes with different attachment possibilities. Overall Very Pleased.