MINGER White LED Strip Lights, 16.4ft Dimmable Strip Lights Kit with 6500K Bright White Daylight, 300 LEDs for Vanity Mirror, Wardrobe, Dressing Table, Kitchen, Christmas

The media could not be loaded. I liked that it was enough light to do both vanities which are shaped entirely differently. (I did purchase one set for each separate vanity ). Both mirrors are fairly large, especially my daughters(round mirror) was able to go around each one @ least 2x. As stated in previous reviews from other buyers I’m not crazy about the finish as it could be more pleasing to the eyes.I’m no pro but, it was very easy to work with, and I did reposition the roll several times. As you see on the tri-fold mirror , I attached the tape to my unfinished styrofoam area for more of a backlighting effect.On my daughters round mirror, which I did last, after I became an expert, lol. I applied it directly to the front of her mirror and also to some of the textured plastic parts of her mirror. I didn’t have to reapply as much on hers. As I was now a qualified expert, lol. But the tape is sticking just fine on both surfaces. The lights all appear to be working , the (3 ) modes work just fine. The switch is easy and also attaches well and has been repositioned a few times.Of course the round mirror appears more illuminated due to the lights being on the front, but mine are bright as well on the sides.I doubled my lights for more lighting and there was no issues with bending. I wold just give it some slack in that area for corners, as well as,I did not see the scissor marks for cutting , so I did not attempt to alter that way.I see the description says cut along the lines for size adjustment as well as a few of the reviews I read.I’m not sure if they sent an updated version without the ability to resize, but neither set I purchased had what appeared to be scissor markings.The last pic will be a close up of all markings that were on the lights, the doubling I did and my corners or areas where my truck fold vanity folds or adjusts.Please comment if I missed something.

The media could not be loaded. These strip lights exceeded my expectations! I bought two sets of the Daylight White 16.4 feet to use when making two small faux windows for my garage and they were PERFECT for the project. I used shadowbox frames, window film, these strip lights and outlet timers and they turned out great...in LARGE part thanks to the lights. I made/installed these over four months ago and they are on for a minimum of four hours every day (they're on timers) and they're still going strong with ZERO issues!PROS:1. Adhesion is GREAT. I was prepared with a variety of options for keeping the strips in place once they were inside the shadowbox and didn't need to use any of them because the strips stuck and stayed stuck!2. They are VERY bright. Brighter than I expected them to be, in fact. For this project I had planned to add a reflective surface on the back wall of the shadowbox to increase the brightness, but after installing the lights I found that to be completely unnecessary!3. DIMMABLE! This was a happy bonus and one that turned out to be helpful. One "window" is set to go off around daybreak and is set on the lowest light output. The second goes off thirty minutes letter on the brightest setting. It has worked out well! The change in brightness from lowest to brightest is pretty subtle (see photos and video), but it's nice to have the option.4. Price. After receiving them and seeing the quality I felt like they were appropriately priced.CONS:1. Absolutely NO cons! Personally I wish the dimmer would go a little lower (to almost a nightlight setting), but I certainly don't consider it a drawback that it doesn't. That's just an "in a perfect world" wish.OF NOTE:1. I did not trim these lights, I used the entire strip on both strips, so I can't speak to how well they work after being cut or how easy/not easy they are to cut. Mine are also concentrated in a very small area, so I'm sure if they're spread out (under kitchen cabinets for instance) the light would be less concentrated (less bright.)2. The dimmer is not a slide dimmer. It is a button that will increase/decrease the brightness three times (see photos and video for reference...the first photo shows the difference between the highest and lowest settings, the video shows the lights come on set at maximum brightness, decrease to the lowest brightness and then increase to return to maximum brightness). It's not a huge difference in output, but it's still nice to have the option!BOTTOM LINE: Buy with confidence, but if you're buying these because they're dimmable have realistic expectations!

These are so awesome I bought a second pair for my bedroom closet.* Pros:* Easy to install.* Glue is very strong. Though make sure to clean intended area prior to application.* Kitchen set: Was long enough to wrap from bottom left, to above across and to all the way down on right side. I even had to cut about 5-6 inches of leftover.* Bedroom set: The entire length was used here. See the improvement reflected in uploaded pictures. Main improvement was all the way in the back which is hard to access and even sunlight cannot reach. I was fortunate that there was enough coverage for that "square" area all the way in the back which need more light.* Controller is very responsive, there are no glitches while switching between the settings.* There are five light settings from low to high, though I am not sure of the percentage increase. My pictures only show highest setting mainly because camera will make up for lost brightness.* The cord from the strip light to the connector (power supplier) is long enough to ensure proper placement for it. The AC power cord length is 58 inches.* Cons:* While making a corner: plastic clips are provided for this main purpose, but it can be a challenge for some to ensure a good corner. I only used them in the kitchen set, and THAT very corner (two in my case) cannot get flattened to the wall; it remains off the wall, but the clips ensure the rest of the straight lines remain in place. But perhaps I did not do it well. Either way it is not a bother for me as they are out of sight.Side note: I have ordered a motion sensor which is to work fine with these. I will update once I receive. Other users assisted me and said they too bought it separately and worked with their existing strip light.