Key Fob Keyless Entry Remote fits 2004-2016 Toyota Sienna (GQ43VT20T 6-Btn)

Good stuff.

Been about 6 months since I purchased the key fob keyless remote, the price was worth it, and programming was easy and it’s still working perfectly…..

Works great but time consuming to program

super pleased with USA remote purchase. Brought 2 of these to replace the factory ones that had stopped working years ago. Followed the programing instructions and it worked on the first try. Wife is so happy to have a working push car remote again.

4 stars. - 1 star based on the fact that (1) this FOB feels of lower quality than the OEM. Plastic feels thinner. (2) rear door buttons are slightly depressed so it takes more press to activate the fob. Not sure if this will wear it down faster with repeated use. Programming was easy and straightforward. 1. With all doors closed, and the key out of the ignition, only unlock and open the driver door. 2. Within 5 seconds, Insert the key into the ignition (Do NOT turn it) and Pull the key out. Repeat one more time. 3. Within 40 seconds, Close then open the driver door. Repeat one more time. The, insert the key into the ignition (Do NOT turn it) and Pull the key out. 4. Within 40 seconds. Close then OPEN the driver door. Repeat one more time. Insert the key into ignition and leave it in the ignition. Now CLOSE the driver door. Turn the ignition to ON then back to OFF (Do NOT start or crank engine). Remove the key from the ignition. 5. Within 3 seconds, the power door locks will lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point. 6. Within 40 second, A. Press the lock and unlock buttons on the remote together at the same time for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, press and hold the lock button by itself. Within 10 seconds, the door locks should lock and then unlock once indicating successful programming. (If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted) Repeat steps A and B in step 6 for each new remote. 7. Test remote FOBs. Try all buttons.

wasted $100 to have programmed by master locksmith technician worked total of 2 days he came again but said he has had several people with keyfobs remotes cheap not reliable stated he is considering no longer doing Amazon keyfobs or transponder keys. I have not wanted to request refund yet because inconvenient at times to return items... BOTTOMLINE YOU GET WHAT YOU PAY FOR!

This worked for my 2008 Toyota Sienna. The buttons seem just a little harder to press, but maybe that will help prevent accidental pocket presses. The instructions provided were excellent. The only thing that confused me briefly was I didn’t know if I need to set my original working fob also. I decided to do it right after I set up the new one and everything is working great! Now I just need to remember to take my keys out of my pocket before they get washed. 😑

Works well on my 2004 Toyota Sienna.

To replace the fob key that was damaged

Excelente producto, un poco mas ligero que el original, pero buenos materiales. La programación práctica después de algunos intentos.

Funciona excelente y muy fácil de programar En Youtube muchos tutoriales

Easy to program

Precio, calidad. Aceptable Y funciona muy bien