6 Six Monitor Desk Mount Arm, Fully Adjustable Six Monitor Stand Fits 6 Screens up to 32 inch, 19.8 lbs, Weight Capacity per Arm, Black X35-6

Up to 32" means <32" I guess. Bought this to setup my desk after getting 2 additional 32" monitors. I have 2 27" in the middle bracket. But when I tried to put the 32" on either side the arms bow like crazy and won't stay in place with the screws at each joint tighted down.

Missing parts, cannot use, waste of money

This would probably be a 5-star review except that the product is missing 3 vital screws and HILLPORT's contact information is nowhere to be found. The three screws that connect the pole to the base arms are missing entirely and instead there's mystery hardware in the form of 4 black threaded rods with nuts that don't seem to go anywhere or have any reference in the manual. Seller, please contact me? UPDATE: Seller contacted me and we arranged a delivery of replacement screws! Thanks for following through

The stand arrived missing critical parts. The arms are so warped and misaligned there is not enough adjustment to make them level and properly aligned. Save your money, buy a higher quality product.

Everything is nuts and bolts, and the only articulation are the X and Z axis, no minor adjustments for the hieght once the arms are secured to the pole. It relies upon compression grip to keep the arms supported (seriously??). Need to re-adjust? You have to take all of the monitors off, loosen the compression fittings, slide it up or down, re-tighten, then remount the monitors, hoping you got the distance right. Because of the lack of Y axis adjustment, you cannot have any monitors in a portrait configuration. Any size difference in the monitors (differences in brand and relative vertical positioning), well too bad, because you're stuck with how it is. Then there's the weight rating. Just having the bottom three monitors causes the center pole to tilt, which causes all monitors to swing forward. Adding the upper monitors made it worse. The fact that the hinging of the mount just makes it worse as they won't stay in place, but go where gravity demands. The pole is mounted soundly, it literally bends. This made for six same brand/model monitors only. Good luck.