Wire Connectors, 12 Pack Low Voltage Wire H tap 2 Way connectors 2 Pin solderless with no Wire-Stripping Required for Mid-Span Branching in Wires Connection 20/22 AWG Cable 0.2-0.5mm², by brightfour

Used these when adding some led lights to the cargo bay of my van and they've worked really well. Easy to use and the connections are still trouble free several years later.

Bought to make replacement of a cooling fan on a kitchen extractor inverter, worked well and nice secure fit

Only works well with bell wire, so not suitable for garden lights wire.

Does the job really well. Look good as well.

So quick to fit and cost effective

Perfect for my needs, easy to use

These are ideal for connecting small wires. I bought them to connect wires together when doing an electrical job on my car. Car wires are small and I originally used block connectors with small screws but was concerned about whether I would get a good connection or whether the wires would come loose. With these connectors you don’t even have to strip back the insulation. You just push the wires into the connector and close them up. They are also small and unobtrusive and grip the wires tightly. Couple of tips. Make sure you push the wires into the connector as far as they will go and you will need to close the connector gently nipping it with a pair of pliers.

A little fiddly especially when trying to connect wires above your head but ultimately do the job. Tip if the wires your using have already have the insulation shaved off at the end cut that bit of wire off as i found it didn’t connect properly (probably just pushed the wire up)

Superschnelle Lieferung, genau was wir wollten. Einzig beim Einklemmen ist Vorsicht geboten, man braucht etwas Kraft und muss aufpassen, dass die die kleinen Klemmen nicht abbrechen.

Articolo perfetto x lo scopo pratico e funzionale. Come da descrizione. Fantastico

Excelente conector, la fijación es muy segura, con pestañas de cierre, pero se pueden abrir para reutilizar o asegurar mejor la conexión si fuera necesario. Con cables muy finos (1 mm) hay que asegurarse que el cable este bien tenso antes de cerrar para que "muerda" bien y llegue al conductor. En cables de 1,5 o 2 mm va perfecto.

..pero solo me funciona si pelo un poco el cable por la zona donde le pega el corte, lo cual anula la ventaja de este tipo de conectores, ya que no es llegar, meter el cable y cerrar. También es cierto que los cables de los coches, al ser de 12 V y bajo amperaje la mayoría, son muy finos, lo cual los hace más difícil de manejar. Le doy 3 estrellas porque la idea es buena.

Super erfinde ! Haben in der Küche die Decke abgehangen und mit Strahler bestückt und dafür die t-Verbindung genommen einmal frei . Einfache Handhabung