HD 1080P 5 inch Wireless Backup Camera for Truck: 15-Min Easy Install Clear Night Vision Digital Signal Stable No-Delay Bluetooth Rear View Camera for Car Pickup SUV Camper Parking Safety Assistance

I had to return a backup camera system from another seller because the license plate camera was barely attached to the bracket by a very tiny screw. I then bought this Leekooluu wireless system and was very happy with it. The license plate camera is securely attached to the bracket, the second camera is also very well built, the 7” monitor is clear and crisp. They even provide extra wires and connectors for you to test the system before permanently installing. This Leekooluu backup camera system is one of the few on the market that can also record 1080p videos when you drive to be used in case of accident. You will need to provide a SD card, 128gb or less, and the videos can be automatically recorded and played back clearly on the monitor or on computer. After successfully testing, installing is straight forward, connect the 2 cameras to 12v power then plug the monitor to a cigarette lighter receptacle, turn it on, and voila you have the videos wirelessly displayed on the monitor, clean and clear. Both cameras are pre-paired at the factory, this saves a lot of time and hassle. It took me about 30 minutes to run wires, secure the cameras, the rest is easy. So far, the system works flawlessly for me when backing up. I also have many videos to keep when driving through beautiful areas and proof in case of an accident. I believe this is one of the best backup camera systems out there, both in quality and price. I strongly recommend it to anyone who needs a backup camera or a dashcam or both.

Product works great. I get a better view in backing than I do with my brand new Nissan Truck with its back up camera. I did not install it myself, but had it installed by an Auto Shop. He said that the installation was very easy and did not take long at all. I told my neighbor about it and he is thinking of getting one for his daughter that just started driving.

I tried extension mirrors, I couldn't see any better behind that without, maybe a larger view. I searched hard and finally ended with this backup, rear view camera system. The camera is simply wired into my licence plate light, so it is always on when driving and I don't have to worry about charging. I also like how it integrates into the license plate frame. It is Bluetooth to the monitor, so no wiring. The monitor is crystal clear and simple to operate. My trick though, is I do not mount it on the dash, I use it without the mount and rubber-band it over my rearview mirror. My rearview mirror serves no purpose with the trailer blocking my view, and it's where I've been looking forever to see what's behind me, so it feels very natural. I highly rate and recommend this one! (Just realized that I need to copy and paste this Amazon review.) 😎 I left this review on one of my trailer groups and decided I need to share here.

I am currently using this on a 1999 Jeep Wrangler. I found it very easy to install, but I am very comfortable with soldering and connecting it to existing electrical systems. This is not necessary as you can power it from a cigarette lighter. I actually use it all the time, kind of like a rearview mirror instead of just when I have the Jeep in reverse. It works very well, you just have to remember there is no audible alarm to let you know if you are too close to an object. It works extremely well in low light conditions when reversing in the dark! The only thing that prevents a 5 star rating for this is because it will occasionally (< 1% of the time) lose signal or "freeze" the picture on the feed.

Hello, I installed this wireless backup camera on my Ram 1500 truck and I am very happy with its performance and ease of installation. I needed a solution for coupling my truck to my travel trailer because of difficulty in seeing the hitch to tongue connection with the trucks backup camera which was too far away to be of help. I opened up the box with the parts and found that everything was included in the kit including the Display,License plate camera, suction cup mounting unit, and 12 volt power cord, along with the necessary wiring, connectors and instruction manual. First, I installed the suction cup mount securely to the display. The suction cup mount has a tightening knob to cinch down firmly. and attached the display to the console of my truck. From there it is simple to reach the power take-off to plug in the power cord for the power supply which includes an on-off button for convenience. Second, I went to the rear of my truck to see where I could find the 12 volt power feed on my truck to power the camera. You can use power from the reverse light, tail lights, or license lights. I count that the rear wiring on my Ram was coated with a rubberized material that made it very difficult to select and/or tap into an appropriate 12 volt feed. The solution on my truck was to use the flat 5 wire trailer hitch plug that was conveniently right next to my camera. I used a trailer plug cut to a short length and connected my camera’s power cable to the White/Ground and the Brown/Running lights. I had an immediate and simple solution to getting power to the rear camera. Pros: The nice 7” display was very clear with great resolution and the rear camera gave me the close-up view I wanted for lining up the hitch with the trailer coupler The signal from the rear camera was very stable with no issues and the camera came pre-paired to the base unit display Installation is a simple matter. Once a 12 volt source Is determined simply connect the positive and negative wire from the camera Easy to access panel button set up menu to access all screen settings, play, and record The base unit/display can accept up to 4-cameras and there is a choice of a single display or multiple camera display. The base unit comes with an SD card for recording purposes should you need that function Camera has visibility in low lighting conditions and at night Importantly, I can switch the display to my other truck by disconnecting the display from my Ram, and ordering another rear camera for my Tahoe Cons: I have no complaints to report as this is exactly what I needed to assist with my travel trailer hookup. Suggestions: Your truck may have a trailer plug in close to your license plate as my Ram has. Using that solution saved me a bit of time trying to find an appropriate power source. Also, I may invest in an optional front camera so that I can record front facing events.

This is fabulous for our RV, works like a charm! going to get one for my truck too!

I’ll be honest—I’ve had some “creative” parking moments in my life. There may have been a few curbs jumped, some near heart attacks in tight spaces, and one very unfortunate trash can incident (RIP, blue bin). But thanks to this wireless backup camera, my reversing game has gone from “Are they even trying?” to “Look at that precision!” First off, setup was shockingly simple. No running cables through impossible spaces or deciphering a wiring diagram that looks like ancient hieroglyphics. Just plug in the monitor, connect the camera to the reverse light, and voilà—working backup camera in less time than it takes to find a missing sock in the dryer. The system came pre-paired, so I didn’t have to do the dreaded Bluetooth sync dance either. The screen is a huge upgrade from my old 4-inch setup. I went from squinting at a tiny, blurry display to actually seeing what’s behind me in glorious HD. It’s like I upgraded from a flip phone to a flatscreen TV. And the night vision? Incredible. My old camera might as well have been using candlelight, but this one gives me clear visuals even in pitch-dark parking lots. No more guessing if that shadow is a curb, a bush, or something much worse. One of the best features is the automatic recording. It captures everything onto an SD card, which is great in case I ever need to prove that wasn’t my fault (or, at the very least, have some solid evidence of my questionable parking attempts). When the card fills up, it just records over the old footage, so I never have to worry about managing storage. Now, if only my phone would do the same instead of reminding me I have no space every single day. Living in a place where the weather changes its mind every five minutes, I appreciate that this camera doesn’t care if it’s raining, snowing, or feeling like the surface of the sun outside. It’s waterproof, dustproof, and apparently can handle temperatures from -22°F to 176°F. That’s more durable than me after 10 minutes in the summer heat. Another cool bonus is that I can expand the system with extra cameras. I haven’t added any yet, but knowing I can install front, side, or even trailer cameras later is a huge plus. The split-screen option makes it easy to see multiple views at once, which means I’ll finally have zero excuses for “accidentally” nudging the garage wall. If you're tired of guessing where your car actually is when backing up, this camera setup is so worth it. It’s simple to install, easy to use, and makes reversing way less stressful. Whether you're parking in tight spots, towing something, or just want to avoid unexpected "oops" moments, this thing has your back—literally.

I had difficulty installing this item and couldn't find a customer service contact number other than to contact Amazon. Amazon processed a replacement, which has the same problem of No Signal. I did find a phone number online, but it was not correct. I found an email address and had these recommendations. Make sure that the antenna on the monitor is vertical. This seemed to be a red herring. Then, they said that my switching polarities on the camera connection to the backup lamp, even though the instructions included thus step. I finally used a voltmeter to confirm the polarity of the backup lamp. I still had problems getting a good connection. I then soldered the camera leads to the backup lamp leads and the system worked. A negative is that the cable from the monitor to the cigarette lighter is shorter than I liked. I mounted the monitor high on the windshield and pressed the cable along the headliner, down the driver's side pillar and behind the weather stripping on the driver's side. I wanted to put the cable along the bottom edge of the dashboard, but the cable was too short. Fortunately, the cable from my old system was compatible and I was able to string it like I wanted. This system is much clearer than my old one, which started losing its night vision. It also had a much shorter delay than the old system. Except for the installation challenge and lack of direct access to customer service, I am very pleased with the quality and price of this system.

This is my second one. Mounting on window sticks on and will not come off. Easy to install and Excellent picture quality. Compares to the factory one in my Toyota

Easy install, works like a charm

utilisé sur une machine à vendanger fonctionne parfaitement, trés facile à installer il faut juste trouver une alimentation + pour la camera (je l'ai branché sur un phare de travail) tout fonctionne parfaitement

Camera and monitor work well

Install was a breeze , I simply removed my centre rear running light and replaced it with the camera which gave me a power source without having to make any more holes in the RV’s siding. The picture came up instantly on powering up, the picture is very clear with good colour. The screen is also equipped with a sun shade to reduce glare. I am very impressed with the quality of this device as well as an excellent value compared with similar products I have seen.