Whistler WS1065 Digital Trunking Desktop Scanner – Programmable Police/Fire Radio with Backlit Display, 1800 Memory Channels, and V-Scanner Technology – Black

EDIT** I am legitimately baffled by the number of bad reviews that blame the scanner for lack of understanding by the purchaser. This scanner will arrive at your door unprogrammed and you will have to input the data needed to make it work. The data is freely available. There is no need to pay any kind of monthly fee or subscription in order to program this scanner. You can absolutely program this scanner by hand. But the days of inputting a couple analog frequencies are basically over. Most systems at a minimum will require inputting of control channels and talkgroup information. While possible via the keypad, it will take a LONG time to put in more than a few "channels". Modern trunking systems require a lot of data to function. THIS IS NOT YOUR PARENTS ANALOG SCANNER. If any of the terms are unfamiliar to you, expect to spend some time reading online forums and fiddling with things. Again...this is no fault of the scanner. It is the nature of scanning in the 21st century. There are softwares available to make programming easier, but you will still need to know the required data and input it correctly. Just because you nor 1200 of your closest IT buddies have the experience/understanding to program this radio, does not mean the scanner is at fault. It would be like saying that heart surgery is pointless because you don't know how to do it. You have to LEARN. And Amazon, Whistler, some guy on the street, or the seller cannot just magically have this programmed when it shows up at your door. Every system is unique. Every scanning interest is unique. Would you buy a vehicle where the seat is adjusted (and locked) for the salesperson and the radio is stuck on their favorite station? No, of course not. This scanner functions just fine for the price. And 90% of the negative reviews are written by people who do not understand modern scanning and don't seem to want to learn. You can purchase pre-programmed scanners...at twice the price. Or you can spend a couple hours and learn the information needed to program your own radio. There is no free lunch when it comes to scanning modern systems. Sorry. ---------------------------------------------------------------------------------------------------------------------------------- Whistler has taken over the design from GRE, but the heart of this radio is still the same. As such, all accessories like programming cables and brackets will work across the board from GRE/Radio Shack/Whistler. The scanner is a Phase 1 capable, digital trunking unit. It does not have the most robust front-end (particularly on VHF) but handles other bands extremely well. It does an okay job on VHF if you fiddle with the programming and understand how it acts around strong signals such as in simulcast systems. This is a minor annoyance when you consider the price. At around half the cost of a scanner which only marginally handles dense RF environments better, I can easily look beyond the shortcomings. Be aware however, if you need TDMA (Phase 2 or DMR) reception, NeXTEL, or a few other newer protocols, this scanner cannot and WILL NOT be able to listen to them. Also be aware that this does not decode encryption. If your local agencies are encrypted, this scanner nor any other will allow you to listen to them. If you are coming from the world of analog scanning, the step up into trunking and digital worlds can be daunting. Expect to spend a little time with this unit to get everything firing on all cylinders. If you are a long-time scanner buff, you can have this thing tracking a local system within a few minutes of opening the box. Everything is just easy and intuitive. For the price, if you only need phase 1, this scanner is hard to beat. It is also probably the most user friendly option for someone who wants to get into modern scanning but still tinker with things. You can get touchscreen scanners which run off a database that requires no previous knowledge. But if you want to finagle with settings and aren't afraid to learn new things, this is a fine scanner to cut your teeth on.

I left the tech support unchecked only because we did not use their tech support. Back in the day we had an older scanner and we were able to just punch the channels in. This is not the case anymore. The directions advised against this. If I had one complaint or suggestion I would have the makers of the scanner include the software to program the scanner. After signing up with radio reference for the frequencies and then signing up with psredit it can get costly. Luckily some offer a 30 day trial. The scanner itself was just we needed. There are way more options that we don't use as of yet but I am sure if I asked tech support they would gladly walk me through all that. But I do not know this for sure. I get all my local channels ( Thanks to the programming software and radio reference) and can hear clear as a bell. An external speaker may be a great addition but not necessary if you are in the same room as the scanner. And if you were to get one they don't seem to be that expensive. So, in a nutshell we love the scanner but not real keen on the additional programming cost. That could be easily fixed with a kickback or a voucher to get access to programming when you purchase the unit.

This is a nice scanner that, for me, was easy to set up and program. I should say that I am an Extra Class Ham radio operator, so I already know a little about radio. This was my first scanner. It will handle FM (including Ham repeaters. It also will decode P-25 Phase 1. It will not decode some other digital modes like P-25 phase 2, NXDN, and DMR. I was getting the next counties because they were FM conventional and the State troopers because the State's (Viper) system is based on a P-25 phase 1 trunking system. I couldn't any of my County's transmissions because they use an NXDN system. I then purchased a Whistler TRX-2, which got everything I was missing. I don't know of any commercially available scanner that will encode D-Star or Fusion, but I have radios that can scan all of that. I was going to send the Whistler1065 back, but I have found that it is advantageous to run two scanners simultaneously. Since each scanner is on different frequency bands at any given moment, it helps me catch transmissions I might have missed. Also, when a scanner stops for a prolonged transmission, the other scanner can continue to scan. I really like booth scanners. I like the TRX-2 best, but at twice the price, it should be better! I recommend you check what system your local services use and buy the one that gets what you need. You can get that at radiorefference.com

These stupid scanners are too hard to program. The manual doesn't describe anything properly. They send you to some site to look up frequencies and become a subscriber but it doesn't show you how to do anything. The site has no proper software download area. When you finally find it, it is some old DOS program and requires payment unless you want to use the demo version for a month. Other than the free weather report, I didn't really hear anything and all You-tube videos of this item are basically idiots mumbling. One guy didn't even show the unit and just grunted in a daze. The manual's PC requirements mention Windows XP and believe it or not Windows VIsta...Vista...for an item sold in 2023. They're selling them on the Whistler site and the latest Windows supported or mentioned is Windows 8. It didn't recognize any COM ports when I tried the cable. The manual also describes the settings of switches and menu items but doesn't say what it means, like "priority", or "AGC-controls the AGC function , which is what?" Some reviews have mentioned that this is the fun of finding out, but I don't want to spend over $200 on something that does nothing. What is the point of making something so difficult to use or even know it's working?

Es buen rastreador, solo la sensibilidad es menor al bct15x de uniden, tengo el ws1040 un pro97 de Radio Shack y un pro 2023. De risa el realstic pro 2023 se los lleva a todos en sensibilidad de recepcion, pero sin todas las modernidades, la prueba del uniden y el whistler ws1065 ambos con antena discono tram, se hace muy notoria la sensibilidad en favor del uniden, pero para programar en Mexico si es mucho mas sencillo el whistler, tanto el 1040 igual al ws 1065, muy buen equipo

a litter hard to use for me but others might be easy to set up

Great scanner and comes with mounting bracket for a vehicle and power cable , ac adapter to setup as a desktop and antenna . This is a hard scanner to program a lot harder then the Unidens (that I have 2 of) . It does come with a usb cable to be able to connect to the computer and though a 3rd party software is easier to program but that is extra $ . Nice scanner sounds and looks good and works well once programmed . Would buy another one if I was looking to get more however prices are inflated now and should be around $320 Canadian remember this is only apco p25 phase 1 and is not phase 2 so make sure you know what system the agencies in your area are using .

Awesome scanner. Much more sensitive than uniden.

This is an excellent radio for the price, does the digital trunking system I wanted it to, it does Conventional VHF/UHF channels well. Does not do well for distant signals on an external antenna. I use a discone 70 feet up and I have to use a TV/FM filter to get signals I would not without it.