Universal USB & PWM Fan Hub, White (EG-HUB01W)

Easy to install, works very well!

This hub is definitely worth the $16 or $17 price. You have to use the supplied cables from the motherboard fan header and USB to the white ports on the hub. The USB powering gives you 2 options.The 9 pin internal and it also comes with a USB-A to 9 pin for getting power from the I/O panel of the board. It comes with back panel grill slot that has a cut out for the wire to pass to the outside of the case. Just make sure the USB power is plugged in firmly to the hub and everything is working before buttoning up..mine worked loose a couple of times when I was tucking wires.Im running 3 sets of 3 fans and 1 set of 2 fans daisy chained into 4 ports on the hub with no problems.

Very well made product. I have it fully populated with fans and it works very well. I recommend this for anyone with a large amount of case fans needing connecting to a single control point.

Gets the basics right, and has nice perks which differentiate it from the competition. It has two methods to power it - one via first party integration with Lian Li's own PSU units, and second via standard means (sata). Color coding of the in/output ports makes for a smooth setup and far less fiddly than some other cheaper options. Construction is solid and admittedly I enjoy the color matching on my case as well as not having to figure out where to cram in the hub because of the magnetic quality of life mounting. Had considered the old and standard NZXT option for a while but decided to try out Lian Li for their reputation and also because this was more features in a single unit (not just USB expansion but the fan hub as well). Great fit for the modern fishtank build.

Great product as it made routing all the Lian Li wireless fans & radiator morre simple freeing up the rear panel ports on the mobo. The magnet could be stronger though so knocked off 1 star

I have uni SL LCD fans was originally running a fan hub with sata power... but constantly not delivering enough power until I switched to direct PCI-e power from the PSU and it works great. if you're using the LCD fans I recommend this fan hub.

Works like a champ! Very easy to install and now my pc have a great cable management after having this item!

Works whether you have a Lian Li supply or not. Good for boards that dont have enough fan headers

One of the better hubs out there on the market imo. Very useful

Güzel ürün fakat dikkat edilmesi gereken bir kaç önemli husus var. Hub'a PCI-E portu üzerinden güç veriyorum. Bildiğiniz gibi yeni fan modelleri daisy-chain oldukları için hub'un 9 pin usb portuna 3+3+1+1 şeklinde 4 portu da kullanarak 8 tane Lian Li TL LCD fan bağladım. Sorun ise burada başlıyor. 3'lü olan bi fan grubunun lcd si ara ara güç yetersizliği yaşıyor gibi bağlantı kopma sorunu yaşıyor. Bu 4 porta bağlı toplam fan sayısını 7 veya daha aşağısına düşürdüğümde ise bu sorun ortadan kalkıyor. Netten araştırmalarım sonucunda max 6-7 fan bağlanması ile ilgili tavsiyeler mevcut. not: Ürün güzel görevini hakkıyla yerine getiriyor. Kullanımı ve bağlantıları kolay gerekli ara bağlantı kabloları yanında geliyor.

Picked this up to simplify fan and internal USB management in a high-end build, and it did exactly what I needed. If you’re running multiple fans, RGB controllers, AIOs, or USB-based internal devices, this makes cable routing way cleaner. The build quality feels solid and well thought out. The magnetic mounting is surprisingly strong and makes placement inside the case super easy — especially useful if you like to fine-tune cable routing during the build process. Having multiple USB headers plus multiple PWM fan ports on one hub is incredibly convenient. It reduces motherboard header congestion and makes managing multiple devices much easier, especially on builds loaded with RGB and controller hardware. Power delivery to fans has been stable, and PWM control works exactly as expected. No weird fan ramp behavior or detection issues. Installation was straightforward — plug into PSU and motherboard, mount it, and you’re good to go. If you’re building a complex system with lots of fans, RGB controllers, and internal USB devices, this is a great quality-of-life upgrade. Would definitely use again in future builds.

I connected two bundles of 3 Lian li uni fan TL fans and two bundles of 3 fans and 2 Lian li TL-LCD fans

I found this easy to install and it works as intended, helps make cable management easier.