Marble and Granite Repair kit, Quartz Countertops Repair kit | Porcelain Repair kit for Chips Dents Cracks Holes Scratchs, Fix Chipped Edges Corners, Reattaches or rebuilds Missing Pieces

Really easy to use and sink looked like new again!

Tubs hard No good

great product

I bought this kit to fill a fairly large chip in the edge of my granite countertop, which has a lot of black and gray in it. I started by scooping out a little of each of the A and B resin components onto a piece of aluminum foil, keeping them separate, and adding a tiny bit of the black pigment to each to achieve a color matching the region of the chip. Then I thoroughly mixed them together (about 1 minute or so). I applied the mixture to fill the chip, overfilling it slightly. Then I used the included plastic tool to level the resin with the countertop surfaces. After waiting 24 hours, I used the included sandpapers to smooth the resin. The result was pretty impressive. It was hard to tell that a repair had been done. You wouldn’t spot it if you didn’t know it was there. I learned a few things in the process. Try to minimize how much resin gets onto the undamaged surfaces of the countertop because sanding it down takes quite a bit of time and can lead to over-sanding the resin where you want it to stay flush with the surface. The quality of the results depends a lot on how well the resin color blends with the countertop. You can get fancy if you like and try mixing two different resin colors, matching two colors in the granite, and create a flecked 2-tone filler. It’s limited only by your imagination. I’m quite satisfied with this product. The results are well worth what I spent.

So impressed with this product. Allowed me to do a great colour match and fill of a large chunk of missing marble vanity. Worked extremely well.

This product is great. Very forgiving at install and dry to sanding is only 5-6 hours. It can also be cut with a razor within those hours. Sand and cut color is a little lighter so if you plan to do either, go a little darker.

This is a good product to fill chips in ceramic tile. I used it to fill 3 chips that were 1 cm to 6 cm in diameter. It worked well. There are 2 containers of epoxy resin (A and B) and you mix equal amounts and then try to match the color using the colors provided. That's the hard part. I suggest using small amts of resin in case tge color is off and you have to discard it. I couldn't get my tan color matched perfectly. It is easy to usr. Drying time is 24 hrs. Any excess you can remove with a flat razor tool. It dries to a gloss shine and it's durable. Materials are supplied to mix, apply and sand if needed. Overall it does a good job and it's well worth the price. Tricky part is matching the color.