QuietWarmth 30 Sq Ft - 3'x10' Radiant Heat for Laminate/Float Floors - 120V

Absolutely five stars, ten if it were possible. The ambient heat keeps my entire bathroom cozy all winter long if I leave it on a low setting. Was very easy to install, high quality, and so far it's very durable. We installed it last fall and it's been over a year now and I would definitely recommend if this is something you've been considering.

This floor heating system is absolutely perfect. It’s easy to install and works great on a concrete slab floor in our Nebraska home. I found it easiest to lay it out on the concrete slab and mark the routing of the wires and 2 filament contact pads, then I used a Rotozip with a burring bit to grind out grooves for wiring to ensure nothing was pinched under the flooring. I went with the QuietWarmth LV underlayment, WiFi thermostat, and Mohawk luxury vinyl planks (Costco). We couldn’t be happier with how well this product works.

I like this product. I've had just over 1 sq-m installed under a floating cork floor in a small basement bathroom for two years now. The panels cover about 1/3 of the floor, the rest is sink and toilet. The printed panels provide a much more even heat than the wired ones. However, they don't provide *significant* heat.The spec is 12W per sq-ft. So for my roughly 11 sq=ft I can expect about 130W max. That's two incandescent light bulbs worth of heat. Imagine how warm your bathroom will feel if you leave two light bulbs on overnight - not very... The issue is that older floating floors could not take the heat. Now they can. Ideally QuietWarmth will come out with a panel that puts out closer to 25W/sq-ft.Still, our floor is much warmer than it used to be. I used insulating underlayment across the entire floor. With the panels on 24-7 the floor hits 20C. (To those of you in the third world that's about 68 Freedom Degrees). It's nice on bare feet when you step out of the shower.Last thing, I was foolish enough to buy an expensive temperature sensing controller. Don't do it. A simple light switch is all you need. I keep the floor on during the winter and off during the summer.

I used 3 of these to heat a new office shed. They were easy to install and heat the space nicely. The shed was spray foamed for insulation, 90% of the time these heaters are sufficient to keep the shed warm. Today it is -5 in the upper Midwest, when I got into the shed office this morning the thermostat read 59 (it was set to 68) so while it was not quite able to be my sole heat source I would say performance was admirable. It is very nice to have a heated floor!

This product is pretty simple to use and install. I slipped it over padding and under click an lock flooring, in a room on the cement slab of my house. The padding was so I didn't spend a ton heating up my concrete. This was easy to install during a remodel and when I connected it to a thermostat, it worked without any issues. One of the nice features of heated floors, is that if your room commonly feels cold, the heated floor will also heat up the room. My downstairs used to be cold compared to the upstairs. The rooms I've put heated floors in, no longer feel cold.

Worked as it should at a fair price and arrived quickly.

The way the product was manufactured and packaged I should have known better in hindsight. It does not produce "warmth" in any sense of the word. We followed the directions to the letter and had the assistance of my electrician father in law. It does not work to heat the floor. plain and simple. Granted we installed it on the lowest floor in the house, a refinished basement into a media room, but it does not work as expected. It can not raise the temperature of the floor more than 8 degrees (meaning if the floor is 52 in winter it will not even warm up to 60. We tried a new subfloor, isolation, different barriers until the point of constantly resetting the laminate was a fruitless hassle. There is NO WAY AT ALL this product can justify its cost. Heated floors are awesome, just do not use this brand.

Easy to install, good instructions.The only thing - instructions say to leave a minimum of 6” between mats. I would go lower than that - like 3” instead - I can feel cold strips between them on our LVP floor. It’s less noticeable when the HVAC is warmer, but mildly disappointing.We also used the Sun Touch thermostat (more modern interface). Worked fine even if unofficial.

Perfect for my small galley kitchen.. only required two 10 ft rolls.. side by side.. takes the chill off the floor! Ensure your vinyl flooring is a minimum of 2mm thickness!

If you are installing laminate flooring this is a great product easy install and works great

So happy we installed this in our cabin under the laminate. It is so so nice in the winter. Easy to install.

In instructions is does not tell you to set wattage on the thermostat and on thermostat it says not required. However at 100 watts it was not really working. When I put the wattage for both mats correctly at 750 it worked wonderfully.

Erreur dans les mesures de conversion du descriptif entre pieds et mètres