- Band Saw, 10-Inch Bandsaw for Woodworking, 1515 & 3280 FPM Dual-Speed Bandsaw, 1/2 HP，120 V 5.3-Amp Motor, Band Saws with Double-Sided Fence Assembly, Steel Bandsaws with Miter Gauge

I've been very impressed with this 9-inch band saw. Assembly was straightforward, and it was cutting accurately after a quick setup. The saw feels much more solid than I expected for the price, with very little vibration and smooth operation. I've used it for several woodworking projects, and it has handled everything I've asked of it with clean, precise cuts. The compact size is perfect for my shop without sacrificing the capacity I need for most hobby projects. The included miter gauge and adjustable table are nice additions, and blade changes are simple. If you're looking for an affordable benchtop band saw for woodworking, I think this is an excellent value. It's well-built, easy to use, and performs better than I expected. I would definitely recommend it to anyone looking for a quality band saw without spending a fortune.

Where do I start? First, the company had the saw shipped and at my door SIX days before the expected delivery date. That was a nice surprise. I happened to look at the listing the day it arrived and noticed it was on sale for $70 cheaper than I paid. I contacted the seller and asked for a refund of the difference. They replied within hours and the refund was deposited less than 12 hours after my initial email. Amazing customer service, just phenomenal. As far as the saw itself, it’s solidly made and was a breeze to set up. The directions were mostly very clear and the only time it was confusing, a diagram was provided which made perfect sense. I love the simplicity of the blade guide adjustments and the tension release knob. No hex keys needed. It’s also much quieter than the old 9” I was using. Blade tracking is super easy with the little windows too. The only issue I have, probably because I haven’t had time to look up how to tweak it is the rip fence. The unanchored end moves closer to the right when the clamp is used. I’ve only used it for a few minutes last night, but it’s light years better than what I’m used to. Great machine, great price, fantastic customer service.

There's nothing of this quality, utility, and low price in the retail market. While a bit complicated to set up, especially the blade guides, and the instructions are imperfect (e.g., "Slide the fence onto the left hand side of the table (to the right of the blade)...)", it is very solidly built. I use it to cut sharp curves in Decko tile, which consists of wood composite+plastic support, and it works great. At some >40 lbs it's hard to carry around, but that's a side effect of being "solidly built". Definitely well worth the money.

I was down sizing my wood shop and wanted to replace my Delta floor model Band Saw with something smaller. I initially ordered another small band saw through Home Depot, the gray one. It arrived with a concaved table made of pressed steel. It was more expensive than this model. I contacted their customer support to get a replacement table and after 2 calls to them they informed me this is how it was designed. WTF. I packed it up and returned it to HD. Then I found this saw on Amazon. After looking at it numerous times and doing some research I discovered this is the same saw as the Rikon 9”. They are made in the same factory and just labeled differently. They even look alike. This sold me on the saw. Once I got the saw I started assembly. This was very straight forward and completed in 30 minutes. Then for the first cut. It was horrible. The blade vibrated greatly. The saw needed some alignments. The upper and lower blade guides were out of adjustment. Adjustments took about 30 minutes and the guides were very accessible. Blade tensioning and tracking was also done. Once these adjustments were completed, the saw behaved much better. It is quiet and the dust collection port works adequately. The cast aluminum table is FLAT. I am pleased with it and I would recommend it to any small shop woodworker.

Excellent seller! Fast delivery and just an incredible band saw for the money. quick and easy assembly and setup. Good accuracy and consistency. It's sort of portable with a super sturdy handle mounted on top. I say sort of only because it's a little bulky and awkward to move any great distance. I was able to carry mine down the basement stairs (about 15 or so) without much difficulty. And that's probably where it will stay for the foreseeable future. I'm really happy I made this purchase and would definitely buy again. Highly recommend!

Decent quality

You can't get a better saw for the money. It's a weird name in tools, never heard of this brand, but it does the job nicely. Stay with the slower speed otherwise the motor belt can fall off on the high speed due to the offset pulleys. The pulleys are inline at the slower speed. Cuts great, little timely to adjust but that's the way bandsaws are. Once adjusted, no drift. Stay with a 3/8" wide blade. Revised 11-11-2025: It worked great until this week and I don't use it that much. The lower pulley's shaft keeps moving, causing the blade to come off the lower wheel. This has happened everyday this week. It's fine for a couple of cuts, then it happens again. I've tightened down the shaft adjustment bolts, but the problem never seems to go away! Misalignment issues have always been a problem with this saw, poorly made! I should have spent a few more dollars and got a better built saw.

I purchased the 9" version of this ban saw and have been very happy with it! I've used it for a couple of projects so far and it has worked well. I had a small issue with the table portion, but customer service was very responsive and let me know how to easily correct my issue. (Full disclosure, I'm getting a small gift card from them for writing this review. But I do like this saw.)

Great bandsaw the resaw is amazing cuts strait a must dialling in the upper and lower guid pins and have the blade in the right spot on the wheels and the right tension I highly recommend this band saw

Nice smallish band-saw. I was able to cut through 1/4” aluminum without issue, in a circular pattern, piece by piece. Once I can all the settings adjusted, and the blade stops and tension dialed in, the blade never came off.

Looks like it will be very good for what i need haven’t had a chance to use it much yet but so far it is very good