Luxe Bidet 4 Piece Universal Non-Slip Toilet Seat Bumpers with Strong Adhesive

These will be installed when I get the new seat covers put in. They look great

I got a bidet for Christmas. After about a month or so you noticed that the seat is not sitting stable. The bumpers fixed the problem. They are the perfect height and thickness. The quality is very good. Plus it’s easy to install. They look very sturdy. I’m guessing they could hold a couple hundred pounds. As for the bidet, I recommend everyone get one. 🤙🏽✌🏽

. . . because in more situations these are necessary for the bidet to work, if not the seat presses down hard enough on the bidet nozzle to prevent it from going down and doing it's job. The adhesive may be enough in some situations, on my seat it was not, as the seat rests were very slender, allowing these to rock, and become unstuck. It's a joy to fish one of these from the bowl . . .I'll leave it at that. So around the ones that stayed, I used some caulk to fill in the space to prevent them from rocking, the other one got super glued, then caulked. Have had no issues since. So it's not a bad product, in fact it's more then likely fully necessary, and in some situations, it may be all that you need, but I feel like it many situations, you'll need more stuff to "complete" your install. If you know this going in, you'll be happier, and better prepared.

I installed bidets months ago, but I delayed these bumpers as some reviewers complained they fell off. Our seat ring is not actually flat on the underside, but this is the surface recommended to attach the bumpers. I think there is a risk of a sheering force that may dislodge these, so I decided to try a set and attach them to the porcelain. That surface is flat, and the adhesive back on the bumpers attached firmly. So for these several weeks all has worked well and any sheering force is much reduced at the adhesive. As to the bumpers, they seem well built with a solid plastic base and a slightly cushioned top. The installation is completely intuitive. The instructions are clear and show the recommended placement (which I matched as closely as I could, though attaching to the porcelain in my case). The bumpers are slightly taller than the bidet’s thickness, but the resulting support is much better than without the bumpers. I’ll be ordering sets for the remaining bidets. I may also order an extra set; these are sets of four, but I may add a fifth in the 6:00 position for a little added support. I have been quite pleased and recommend these without reservation.

These looked promising, and they actually felt like decent quality. But there is just no way to make them stick well. I cleaned and prepped the surface, but they just would not stay on. The first one fell into the toilet bowl within an hour of application, and two more disappeared at some points I'm unaware of. I can only imagine they fell in and were flushed. ETA: Was contacted by the company and offered a full refund on these. It was not expected and I wouldn't have asked for it, but I do appreciate the commitment to customer service. The bidet itself is terrific and I'd buy from Luxe again.

Package arrived quickly. Read instructions, watched the YouTube video on installing. Installed in less than ten minutes. No leaks. Bidet works perfectly. Registered for two year warranty. Recommend this bidet over rear wash only units. This bidet is worth the extra couple of dollars. Very pleased.

These toilet seat bumpers were easy to install and made a noticeable difference right away. The adhesive feels strong, and once attached they stayed in place without sliding around or peeling off after a few days like some cheaper ones do. They helped stop the toilet seat from shifting and reduced the wobbling issue we were having. The non-slip design works well, and they also add a little cushioning so the seat feels more stable overall. I also like that they’re universal and low profile, so they don’t stand out or look bulky once installed. For such a small and inexpensive product, they solved the problem perfectly.

I have a few issues with these. I needed them because my luxe bidet I installed (which is great) wouldn’t let my seat go down all the way. I got these and they didn’t stick well at all. They ended up inadvertently falling off and getting flushed which I hope doesn’t cause any issues. It’s a poor design and definitely doesn’t work with all toilet seats. They need to be different heights, at least for my toilet seat, because if you place some towards the back and some towards the front, when you put the seat down, the ones on the back will touch first and the seat will still be hovering and when you sit it will put a lot of pressure on the seat which could break it. This caused my seat to be very unstable because it was only touching on the back (back as in further towards the tank). My toilet seat is curved on the bottom side which also causes some issues with these. These bumpers are too big to fit the underside well because of the curvature of my seat, so the grip was very weak. They held for a few days before giving out. Also, the grey padded part tore / ripped through on one of them before it fell off. Not built well at all. I would recommend getting these: Hibbent 10 Pieces Toilet Seat Bumpers, Universal Buffer Toilet Lid Rubber Bumpers Each One with 2 Thickness TPE Pads(2 Heights) Strong Adhesive Bidet Bumpers Used for Home, Hotel, Hospital instead. They’re cheaper, come with many more options, and they also allow you to adjust the height for each piece. They stick much, much better and the pieces are smaller (not shorter, just slightly smaller in width and length) which allowed me to put them in a place that actually helped my seat. Now my seat solidly touches the toilet and no longer hovers. These luxe ones were a waste of money and a bad design. I feel like it should be obvious that the ones you put near the back need to be shorter than the ones in the front, because the ones in the back will touch first otherwise. Bad design overall. Don’t get these and waste your money, get the other ones.

Excelentes para nivelar correctamente la parte inferior de la tapa del retrete al usar el bidet portátil.

works like a dream, easy to install. Because bidets vary in terms of how far forward or back they are installed, I made the mistake of placing the back ones exactly as shown in the installation instructions then found out it conflicted with the back of the bidet (mine's Tushy) and the seat wouldn't go down properly. I was lucky to be able to pull off the back bumpers and reposition them within a minute or so without damaging too much of the adhesive off the bumpers. Despite this, adhesion is excellent and product works beautifully.

We needed to raise the toilet seat after installing the Luxe bidet. The four piece lifts are very sticky. I tried to pull off one to determine how sticky they were and I couldn’t remove it. Very easy to install and they do the job. If you get the bidet also get the lifts. Recommended.

Se despegan, probe varias posiciones pero siempre uno de los 2 se despegaba.

Bon espaceur, par contre quand ils sont collés il ne faut pas s'être trompé car très difficile pour repositionner.