Victron Energy SmartShunt Bluetooth Battery Monitor 300A

Victron solar equipment is high quality and this shunt is no exception. Very easy to install and the included cables are a plus. Integrates flawlessly into the Victron app and gives all the information about the usage and states of your batteries that you need. The only drawback, as others have stated, is the short range of the Bluetooth signal. But that seems to be the case with a lot of these type devices. I’m pleased with the device and the price was reasonable.

Great product. Really let's you see how your battery is performing.

Very useful device, easy to install would recommend.

Fast shipping. Easy set up. Works great!

Working great not much range on bluetoot maybe 10feet

As usual, Victron continues to provide exceptional quality, fit, finish and utility. Installation is a simple, straightforward process that requires only one additional short cable of the proper gauge for your setup. The included positive wire and secondary positive (for monitoring a second battery bank or midway point) have built-in fuses. One note - the bolts on this require 5/16" or 3/8" wire lugs on the wires from the negative battery terminal and to connect the load or bus block. The shunt itself is very sturdy, and designed for easy mounting in a small space near your battery. It also networks wirelessly with other Victron Smart controllers and other products over Bluetooth to allow them to share information, via the VictronConnect app. A few minutes of reading is all that's necessary to input the battery information and other parameters via the app, and before you know it you're up and running with detailed information that assists greatly with fine tuning your system. You may, like me, find yourself wondering how you ever got by without this addition to your solar power system. I put it off, questioning whether I really needed this. From now on, I'll have one of these on every system I install!

Seems to work great. I used to buy cheaper equipment, but Victron has a better warranty and quality.

Does what it says it does. Very easy to connect to the battery. Sometimes the shunt will not show up in the app if your phone/tablet is connected to another device via Bluetooth. You have to manually program the shunt. Programing in this case is setting values in the Victron app for your specific battery, be it lead acid or LiFePO4. There are lots of You Tube videos showing how to program it. The Victron website also provides values for use in the app. Came with two power cables, one of which stopped working after three uses. Overall, a very handy device to have.

Le module enregistre 45 jours de données aux on ne peut accéder qu'en bluetooth depuis l'application. L'exportation est totalement verrouillée par Victron, il faut ajouter un Cerbo gx qui coûte 300€ et ne permet d'avoir les informations qu'à partir de son installation. Je n'en reviens pas

Pues está bien caro pero es funcional, te permite saber el estado de la batería así como la tendencia histórica de 6 meses hacia atras El único tema es que el tornillo está muy gordo y no entra el adaptador de mi bateria, ojo… esto no corta carga ni actúa como gestión de la batería, solo es para observación

Der Victron SmartShunt ist für mich eine der sinnvollsten Nachrüstungen in meinem älterem Wohnmobil. Endlich weiß ich jederzeit zuverlässig, wie voll meine Batterie wirklich ist und welche Ströme gerade fließen. Die App ist übersichtlich und liefert genau die Informationen, die man unterwegs braucht. Der Einbau erfordert allerdings etwas technisches Verständnis. Ohne KI-Unterstützung hätte ich mich vermutlich nicht an den Einbau herangewagt. Wenn der SmartShunt aber einmal korrekt installiert und eingerichtet ist, arbeitet er absolut zuverlässig und macht genau das, was er soll. Die Verarbeitungsqualität ist hervorragend und die Messwerte wirken sehr präzise. Im Nachhinein frage ich mich, warum ich so lange ohne eine vernünftige Batterieüberwachung unterwegs war. Wer sein Wohnmobil oder seine Bordelektrik besser im Blick behalten möchte, dem kann ich den SmartShunt uneingeschränkt empfehlen.

I received it quickly and undamaged. It works well. It is overly expensive like all Victron products but the quality is good.

El SmartShunt 300A 50 mV es un monitor muy recomendable si quieres un sistema limpio, confiable y conectado, ideal para paneles solares, baterías de litio/AGM/Lead en autocaravanas, embarcaciones o instalaciones independientes. No es perfecto para todos (especialmente para instalaciones grandes donde 300 A se queda corto o si necesitas pantalla integrada), pero en su segmento es difícil encontrar algo tan completo y sencillo de usar.