Washing Machine Foot Pads for Anti-vibration and Anti-Walk | Washer and Dryer Anti Slip Mat with Rubber Technology | Ideal for Vibration Reduction and Shock Absorber | Rubber Isolation Feet Set of 4

These foot pads work exactly as advertised. My washing machine used to shake and move around during spin cycles, but now it stays completely in place. They also cut down a lot of the vibration and noise, which makes laundry time much quieter. Installation was simple just lift the machine slightly and slide them under. They feel sturdy and durable, definitely worth it for the peace of mind.

I recently moved into a place that has a stacked washer and dryer. Problem was the dryer kept moving around on the top of the washer in a cubbyhole enclosed on three sides when the washer was spinning. It would bang against the wall and rattle the dishes in the kitchen and if I didn't hold the dryer still during the spin cycles it would even slip off of the washer to one side or the other. My friend suggested building a shelf in the cubbyhole to set the dryer on which sounded like way more than I wanted to get in to. I wanted to glue the feet onto the top of the washer. We then found these foot pads. I received them quickly, and we got them under the feet (with quite a lot of difficulty on the back feet because you couldn't reach back or have room in the cubby even for leverage. Otherwise it was a cinch to put the feet of the dryer into the pads. Much to my disbelief and delight the pads work like a dream, it's now more quiet and the dryer stays completely in place. What a marvel.

They work well, easy to install, and reduce my washing machines from sliding across the floor. They also reduced the vibration noise. The problem that I had, was the washer kept moving around on the floor. After installing them under my washer, I have only had to make one adjustment. They work well for me!

These things solved our problem! Our laundry machine...well, it's old and probably a little unbalanced... we added these to the footer and it reduced the noise and doesn't vibrate like before. My husband installed it and he seemed to have no issues. Super happy for this inexpensive quick fix.

Works ok. Better than nothing

we put a new floor in our laundry room and I didnt want the washer vibrating and moving and messing up my new floor. someone suggested I get these to put under the legs and it will help the vibrations and the moveing. First let me say it was a challange to get it in the right place and the washer level but it proved to be worth the money and frustration of setting it. After the first wash we noticed a difference. No crazy jumping or moving or loud vibrations it stayed put and even though you can clearly see the washer shaking in the final spin it didnt vibrate or shake or move. Just what we wanted

I'll admit that I didn't really have high hopes for these. However they surprised me. They exceeded expectations. I have a front loader washer w/ the stand/ drawer that it sit's on. It has a tendency to wander. It's very sensitive to the balance of the load. These things did the trick. They kept it place through four loads, including a load of bedding.

My Whirlpool Duet Washing machine walked across the floor. No matter how precise I leveled the leveling feet, it would "walk" or just move across the floor. A Washing machine is heavy and a front loader rotates counter clockwise. This caused the washer to move in a constant direction counter clockwise on the floor. With clothes and water, the machine is heavier. I installed these anti vibration pads which was a simple task. Using a board I was able to lift a corner up onto the a pad and doing this at each corner I was able to easily position the pads under each foot.. I marked the location of each pad and started a load. The machine did not move at all from its position. It was quieter. After the first week and six loads, I thought I had found a solution. For 26 days the machine did not move. On the 26th day I went to remove the clothes from the washer and it has moved seven inches. I found this hard to believe - no movement for 25 days and now this huge movement. I removed the four anti vibration pads to see how the failed. The pads are not solid, but have a web underneath. This web is a "+" within a circle. The web is to give support to the center, but in this case the web had rolled over in a counter clockwise direction. The rubber is not a super hard rubber (allows for absorption of vibration), but this is its downfall, the rubber is not strong enough to resist the twisting force between the floor and the machine. Would a solid bottom work better? This would reduce the chance of the base center material from failing and collapsing downward, which would then lift the circumference material from contact with the floor. I have ordered a solid bottom anti vibration pad and hope this will last longer. It would be nice if the Mfg identified the durometer of the material used. I would not want a super had rubber, but one that can grip the floor evenly.

صراحه ريحتني من الاهتزاز بشكل كبير جداً وثبات قوي

Good product

فعلا منتج لايستحق قيمته وسأرجعه لأنه لايؤدي المطلوب وصغير بالنسبة للاجهزة الكبيرة