MELIPRON Van Laptop Mount Fit for Ford Transit 2014-2023 150 250 350 Cargo Van Laptop Holder Stand

Installation was a bit tricky, but we made it happen. The installation instructions were thorough but a bit confusing for the Wrangler, so we ended up on their website where we found a helpful video. In my case, we had to buy a Torx female socket and use a breaker bar to loosen the very tight seat bolts. We did not remove the bolts, only lifted the seat brackets to slide the mounting plate under. It took my husband and brother-in-law about 20 minutes and a few choice words. When it was finished, everything looked and worked perfectly. I have used it for my laptop and tablet. It is stable and does not rattle. I highly recommend using those lock washers on the top clamps. Be careful not to loosen them too much, as I have already lost a set while inserting my computer. These are needed to eliminate any rattle and keep your computer components secured. It's a Wrangler, enough said. A few drawbacks: once installed, there is no moving the seat to the most forward position (no big deal). The pole components can be easily removed. Fortunately, you can remove the four mounting bolts from the floor plate to remove the half bar, freeing up space for full passenger legroom. Also, the square, plastic edge protectors popped off while tightening and will need to be glued back in place if this is an issue for you. Personally, I don't care since it doesn't affect the purpose. I DO recommend this product and believe it is priced fairly. Thank you.

My only real complaint is that the top bit can still spin around when the height adjustment is cranked down, also my height adjustment clamp shattered the first time I used it but I believe that was a one-off hidden defect. Aside from that, the product is actually quite good so long as it'll fit your vehicle, it's just a little to small for the wide seat bolts in my 2017 Kia Forte but I made it work with some finagling. I have a pretty large and heavy laptop that barely fits on the mount and it handles the weight surprisingly well. Also their customer service is surprisingly good. The height adjustment clamp cracked on mine during installation and I was able to get the part I needed shipped within a couple of weeks without a hassle or having to disassemble and return the entire unit. Not only that but the support team asked for information/photos to send to the designers so they could prevent future models from failing in the same manner.

This is a great product that fits any car style. It was easy to install and works brilliantly! If you are in need of using a laptop while driving this product will suite your needs. Highly recommend

Good deal. Easy to put together and it’s sturdy. The fan is quiet. The bracket fit my jeep Cherokee. It’s light weight and its stability is good enough for my type of driving.

Fits in my 2015 Tacoma. Use thread locker when installing though. It’ll come apart with bumps over time otherwise

Strong and sturdy. Fit Toyota Fortuner.

This is such a faulty product with no customer service. The product ball and joint broke on me and I’ve had it for two months. It didn’t hold up and the ball no longer locks into position. I also ordered it initially with the wrong hardware for my truck and made every effort to reach out for the correct hardware with no response. There is no online phone number and I wrote multiple emails for help with no response. I cannot recommend enough to buy a different product for the cost of this item. It simply is not worth it and there is no warranty or customer support for help.

Will fit most applications,my F250 was probably an exception. 45 deg angle bracket size calls for minor length and width (inside diameter) mods.