30 Pieces Shim Stock Assortment Metal Shim Stock 304 Stainless Steel Strips 1" Width x 6" Length, 0.0007", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.008", 0.01" Thickness Metal Shims

Well made, accurately measured shims.

Each size is in an individual labeled envelope. Thicknesses are accurate - measured with a micrometer. I used these to shim a table saw and sliding table as I assembled them. The assortment was great! The shims I needed (0.005" and thinner) all cut easily with kitchen scissors. The stainless steel stands up to the stresses much better than the saw manufacturer's recommended paper tape. Also since my set of feeler gauges only goes down to 0.005" it's nice to have thinner shims to use as gauges.

Very usable assortment.

Pretty decent shim stock kit. I never measured the 0.010" stock (I used it all to align my lathe before I could measure it), but the tolerances for the others are as follows: 0.008": measured 0.0077", 0.0003" undersize 0.006": measured 0.0055", 0.0005" undersize (the worst one) 0.005": measured 0.0052", 0.0002" oversize 0.004": mesured less than 0.0002" oversize 0.003", 0.002", 0.0015", 0.001", 0.0007": all measured 0.0001" or less out from labeled size

Nice assortment of thickness shims. Use depends on the buyer. I have only good thing to say about this

Great variety set for different projects. However, the thickest one dinged up my scissors, would recommend sheers or tin snips for the thicker ones.