DAYTONAUDIO Dayton Audio TT25-16 Puck Tactile Transducer Mini Bass Shaker 16 Ohm

Fitted two of these to my AtLegends Pinball Table and they work really well. They're not super powerful (the Dayton website recommends using 4 at a time!) but they rumble nicely without being too over powering. Bear in mind that if you hook these up to a standard audio source then they will work more like a subwoofer - which is actually beneficial to my installation as it really enhances the bass in music and sound effects. The proper vibration system kicks in around 60hz and they do give a nice thump!

My beloved Thrustmaster TGT-2 (TGT-II) developed a horrible rattling noise from the transducer. While the transducer is used only for Gran Turismo games, It was pretty annoying This transducer can be used to replace the original one, just need to attach/solder the wire to the original connector. It fits perfectly in the hole of the original Thrustmaster transducer, but the screws are not aligned. I managed to attach it via one screw and thick 3M automotive double sided tape. Alternatively you can drill new holes in the wheel base or build an adapter plate. For 20£ got my rumble effect back and no rattle 100% satisfied

OK for gear sticks on driving rigs. If you want shakers for chairs or pedals... go for a 50 W job !

Using it under my pedals for my racing rig with a bigger one under my seat. Works well and enough power what I need it for

Solid little transducers. Excellent kick on rumble. Not too big either

Flimsy wires, I ended up snipping and resoldering stronger wires

If you're into sim racing or flight simming these are a must have. They will take your experience and immersion to another level. Only installed mine a couple of days ago and will never go back. I bought 2, 1 for under my seat and the other under the pedals. I bought a separate 2 channel mini amplifier (Nobsound) and connected to pc. I use a piece of software called Simhub to setup the transducers for my sim racing. Two are great but i'm sure i'll be adding more. If you're thinking about adding these to your rig, don't hesitate, just get them. You won't be disappointed.

First pair I bought, 1 didn’t work at all and other rattled and died in 2 mins. Next pair I at least had 1 work properly (and it’s very good) and the other did not work at all. Really hope we’re not being sent duds / repairs knowingly...

Ordered 2 of these. 1 arrived in a completely non-working state. Sent it back and ordered a replacement. The replacement was non-functional too. It's not my amp, because the working one is fine in either L or R channel, but the broken ones work in neither. 1 out of 3 success rate and counting :(

Man muss ganz schön aufdrehen, dann beeindruckt der Lautsprecher aber👍

These little transducer pucks are awesome to put on your pedals. I put one on my gas and one on my break. They're fantastic. I used one of their larger pucks for underneath my seat. If you watch @gamermusclevideos on how to add motion to your sim rig for under $150. It'll give you a step-by-step and he will configure SIM hub for you in video it's fantastic

It is not the greatest quality product since the first time it came defective, but for this price it is all right. Amazon sent me a new one very quick. I had to make some adjustments to the system and it works GREAT. Just few tips for others who might think that it is so easy to use it: 1) It requires an amplifier, I used the recommended by Amazon one: LP-2020A+ Lepai Tripath Class-T Hi-Fi Audio Mini Amplifier 2) if you have a direct sub woofer outlet, you can use adapter like Pyramid RY6 1 Male to 2 Female RCA Adapter 3) if you don't have a separate outlet that you can use, you will need to do some extra work (I have Creative 5.1 speakers so the cables from my PC are going directly to the sub woofer that has outlets for the other 5 speakers; I had to open the sub woofer and make another outlet directly from the cables going to the sub woofer speaker) 4) Do not think that you can plug that shaker to any speaker outlet since it will just play like a very bad speaker; you need to get the signal from the sub woofer line only I didn't drill any hole for the bass shaker, but I took longer screws and I attached that tight to the bottom of my computer chair. Works really great. it is like real sound 3D :) Fantastic effect when I play a computer game and when there are explosions - you feel it like your room is shaking. Recommending to anyone that wants to move his sound experience to a higher level. In my opinion any home theater seating should have the shakers build in; tv 3d + bass shakers that would be the real 3d effect.

Parfait .. conforme à mes attentes.