HS-02A 100W Portable Corded Soldering Iron Kit, 3S Fast Heating, 212-842℉, Pre-set 3 Groups Temperature, 6 F245 Soldering Tips, Smart Digital Soldering Iron Pen Tool for Electronics Repair

Nice quality product. Plugged into the included 100w PD power brick (heavy & solid) and the silicone-sheathed USB-C cable, and it roared to life. This thing heats up fast. I’m talking “ready before I can find my tweezers” fast. The variety of tips covers everything I need, from tiny board touch-ups to thicker wires, and the case is also pretty nice, compact, organized, and sturdy. The first unit I received stopped working after the first use. It was over a month past the Amazon return window, but the seller sent me an entire new unit at no cost. The replacement arrived very quickly. Since then, it’s been rock-solid. Stable temps, quick recovery, clean joints. If you want a portable iron that’s genuinely capable and backed by responsive support, this one’s an easy yes.

I am a hobbyist who fixes his own stuff but don't have a dedicated room in the house for doing so - only a large desk. I have a couple really nice soldering/rework stations but it is a PIA to drag them out. Everytime I need to fix/solder/rework/3-D print I have to drag the equipment out, set it up, and then put it away. Most of my jobs take less than an hour of soldering time but that time spans a couple days where other things need to be done on that desk. I found that I was using a sub-$10 digital soldering iron with a 1-2 minute heat time - even for replacing SMD components - rather than pushing aside a big soldering station so I could use a power supply or an oscilliscope or breadboarding stuff or the computer keyboard. Decided to treat myself to this modern device - and it has been so very nice so far. Short tip is perfect, feel is good, heat-up is measured in seconds not minutes. Temp is accurate. Switching between lead-free and normal solder temps is super easy and happens at the expected displayed temp which seems to maintain itself as heat exits the tip and goes into the part. The various tips and 100W available means I can solder 16AWG wires and SMD components with the same thingy. The nice, heavy, long USB-C cable stays where you put it and you don't have to worry about melting your power cable as you move it around. Cools fast. Fits in a desk drawer or a glove compartment so you can pull it out when needed.

As someone pretty new to soldering, I found the FNIRSI HS-02A to be a great entry-level tool. It heats up quickly, and the digital display makes it easy to see and adjust the temperature. The three pre-set temperature settings are a lifesaver—I didn’t have to constantly guess what temperature I should be using for different projects. The iron is lightweight and feels comfortable to hold, which helped a lot with my control as I practiced. It also comes with several tips, which made experimenting with different types of joints and tasks easy. The only reason I’m giving it 4 stars instead of 5 is that the instruction manual could be a little more beginner-friendly. I had to look up a few things online to understand how to set the presets and change tips properly. Once I figured it out, though, everything worked smoothly. Highly recommended if you’re just getting into electronics repair or DIY soldering!

Everything works great so far. My old iron was a basic Weller, so this is a really nice upgrade for me. I don't solder very often, so I can't justify buying a dedicated soldering station. The iron heats up super quick. Just a few seconds versus several minutes with my old iron. It's comfortable hold and work with. The grip is fairly close to the tip of the iron, so it's not nearly as fiddly to work with as basic irons. The included USB power supply has worked perfectly. The USB cable is a nice silicone one, so it's not stiff at all. You're not fighting it and it doesn't get in the way. All of the included tips worked well in my testing. I really like that it came with a decent assortment. The included storage case is really nice. I only wish it had room for the power supply as well. I didn't care for the animation where the numbers rolled over when heating up, but if you update the firmware there's an option to disable that. Overall, very happy with the purchase and would definitely buy it again.

This little iron is a gem! I bought for work travel as service technician and it gets super hot super fast. Defaults to 65W for any temperature change so be advised if you need it stronger you can go into settings and change this setting. Does a good job for small SMD work even. Nice selection of tips and good 100W adapter included. Did notice that if you do go into settings and try to increase the wattage to 100% the unit will shut itself off seems to be safety feature perhaps. So if needed higher wattage than default 65% make sure to only go to like 98% max. Very portable, lightweight, and easy to use just be aware there are sub menus if needing to make some adjustments.

The soldering iron came in a box with a nice zippered pouch containing the iron and tip. There was another box labeled accessories which contained extra tips, the heavy duty USB cable, and the main charger brick (100 Watts). First disappointment, the nice zippered case only holds the iron and extra tip. The power brick is way too big and has to be carried separately; that is really unfortunate. But the main reason for my complaint is a complete failure of the product. I plugged in a soldering tip, provided USB power via the 100 W block, pressed OK as prompted by the display. The iron started beeping and then within 30 seconds the soldering tip was bright orange (the iron was set to 350C)! This is way too hot! I immediately unplugged the iron, let it cool off and tried a different tip thinking it was just a bad tip. After plugging in a new tip, applying power, pressing OK, the tip once again turned bright orange. It is going back to Amazon and I will look for other options.

The FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit has quickly become my favorite tool for all things soldering. As an electrical contractor, I've tried a bunch of these, and this one really stands out. Straight out of the box, I was impressed with how well everything was organized. The 100W soldering iron heats up super fast—like, seriously, it’s ready to go in seconds. This is a huge plus when you’re on a tight schedule. The adjustable temperature control is a lifesaver, letting you dial in the perfect heat for different jobs. Whether I'm working on delicate PCBs or tackling more robust cable repairs, this iron handles it all. Plus, it’s designed to be super comfortable to hold, so my hands don’t get tired even during long sessions. This kit includes a bunch of high-quality accessories like different soldering tips, a stand, solder wire, and a desoldering pump. Basically, everything you need in one package. One thing I really appreciate is the durable and flexible cord that doesn't get in the way. And the carry case keeps everything neat and safe, making it easy to take with me wherever I need it. In short, the FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit is efficient, precise, and convenient. It's a great addition to any toolkit, whether you're a pro or just love DIY projects. Highly recommend!

Worked well. The tips are durable. Best to use it's power supply for best results. Look out for software updates to use with other PS.

Excelente produto. Exatamente como disseram os outros reviews

I picked up this FNIRSI HS-02A portable soldering iron because I wanted something small, fast and easy to use for quick fixes. It turned out to be a lot better than I expected. The heat up time is impressive. It hits working temperature in a few seconds and the built in presets make it easy to switch between different jobs without fiddling with settings every time. The temperature accuracy feels reliable and the readings stay steady. I’ve been using it on wiring, small electronics and a couple of repair projects and it never struggled. For something this compact, it puts out plenty of power. The handle feels good in the hand and the kit comes with everything you need to get started right away. It packs up small, runs clean and the controls are simple to understand. If you want a portable soldering iron that heats fast and actually feels like a proper tool, this one is a great pick.

This product is sold with an American plug on the power supply and cannot be used in Europe without buying a separate adaptor even though FNIRSI actually produce the power supply with a European plug.

Excelente producto

If purchasing from Uk, be aware charger is US only so not worth the extra cost just purchase basic kit.