Belt Tensioner Serpentine Belt Idler Pulley Kit | with Idler Friction Wheel & Water Pump Pulley for Mini Cooper/Paceman/Countryman 07-16 L4 1.6/2.0L L3 1.5L

Fit well, seems sturdy and still holding up well after a year

Perfect fit and performance. 15 minutes to install, repaired horrible whine from the old worn out bearings.

Fast delivery and everything was great.

Upon opening the box for this kit, my first take is that for the price, these Chinese parts have a good weight and solid feel. The idler and it's bearing seem to be of good quality, the tensioner seems solidly built with a good pulley and bearing on it as well. The belt seems as well made as any gates or dayco belt. The install went well, but you must pay attention Installing the idler pulley. If you have, and want to re-use the two dust plates (inner and outer) that are in front of and in back of the OEM idler pulley, you will notice that the front of the new idler pulley is shaped slightly different and thus doesn't allow for enough clearance for the pulley to spin freely and independently from the outer dust plate as it should. Instead the dust plate smashes against the pulley. This can be corrected by using a properly sized thin washer behind the outer dust plate which stands it off the bearing a bit and provides the clearance needed for the pulley to spin without hitting the plate. Another remedy might be to offset the bearing just a bit within the pulley in order to get that clearance, but I don't recommend it as it may affect pulley alignment in relation to the rest of the pulleys. Or you can chuck the dust plates out if you don't care. But I used a washer because i wanted to keep them, and it worked just fine. In the end, the belt, the tensioner, and the idler installed very easily and ran nice and quiet when I started and ran it. Good price for what seems to be a quality kit. We will see how they wear over time and some miles. If I'm anything less than satisfied in the next couple of months, I will return and edit this review. Otherwise, I recommend.

I had a mystery chirp/squell at idle. After saving money and using this kit the noise is gone and im not longer embarrassed by the noise. Easy install took less than 5 minutes.

for a N14 motor mini cooper R56 the belt does not fit. not even close. the tensioner and pulley I will not use as i now have no faith in the parts.

The parts came a day early and were simple enough to install and were a perfect fit.

It was nice getting all the needed pulleys and belt in one kit.

Super pour porte de Garage fonctionne 👍👍👍👍👍

Belt was not correct size

Makes noise from new but it works