248903 Automotive High Heat Coating Spray Paint Resistance up to 2000°F (1093° C), Flat Black, (340 grams/Can)

Best ever product. Very good for rusted exhaust pipe and exhaust muffler. Just clean whole exhaust unit and apply one coat first. After 20 minutes apply second coat. Definetly valve for money product.

First of all i got the paint with a broken seal cap, although not a big deal because the paint seemed to be intact and fine Now i have a bike whose exhaust heats a lot and it had to be painted due to scuff marks and scratches , i prepped the surface with some sand paper (400 grit) and cleaned with rubbing alcohol, i sprayed the paint as instructed and tried to bake , the paint bubbled due to high heat but i switched the bike off and let it sit and cleaned the bubbled paint immediately, i let the paint sit overnight and fired up my motorcycle again in the morning, again it bubbled but now from some places , as this was my 1st paint DIY so i am sure that this bubbling is on my part and not on the paint part, i probably made some mistakes in the prepping and spraying of paint , the surface where it was nicely prepped and primed are looking awesome , go for the paint but get the prep done correctly and go for primer before paint , don't buy from here just go to local market and ask a automotive painter to prep and prime the exhaust before you paint

Good quality

I used this as a base coat on my bike silencer and engine Guard. the coating and spray was amazing.. i had my silencer sanded before the base coat.. it cover almost all scratches.. i had some heavy rust bumps on the curve of the silencer.. it wasnt fully covered.. ya bcoz those r bumps.. soo.. i had some more coats over there before my final black color coat with 3M silencer coat.. If i went for the Black color Rust-Oleum i wouldn't need 3M.. i had other plans for the grey. After all this i still have like half of the can.. it can do Twice the 3M 's job.. spray quality is nearly same as 3M.. if at all it is a little better than 3M. They have even and good thick spray till the end. I tried like almost all Indian brand paints for automotive.. asian paint, cellux 2x, vista.. compare to all this Rust-Oleum is way better but a bit costly. If u have no problem with money go with Rust-Oleum. they are costly, yes.. but it can do more than twice the Vista Auto Care Spray Paint and more than 4 times Cellux 2X..

A must for Indian made cars. Especially for Maruti, Hyundai, Tata and Mahindra .. The exhaust manifold will be good when the vehicle Is new . After 1000 to 1500kms, the exhaust manifold will turn redish brown which is not a rust. The metal that is made up of is of that kind. Auto Manufacturer companies should use such kind of paints, which gives a new look. The "RUST OLEUM"paint is so good, which can withstand high temperature and the paint does not peel off. A very good and a must product....! Thanks Amazon and RUST OLEUM

Not resistance to petrol it dissolves. Otherwise it gives good finishing

The clear coat high heat spray is not up to the standard as per their claim for absorption of heat. I hv applied on car engine and silencer this clear heat resistance coat and the result is dangerous bcz engine room and silencer keep warm after 2 hours of car stop and parked . The entire engine and silencer are too much hot so we cannot touch so it is not a perfect heat resistance spray as claimed by seller and fear about high temperatures remain may caused damage to car No solution from company

Quality of the primer is best and it is rust proof and also heat resistant but the price is little bit high

Good product, excellent coverage

I used Rust-Oleum High Heat Spray Paint in Flat Black to refresh an old, faded fire pit ring, and the results were excellent. The paint went on smoothly with even coverage and dried quickly. The flat black finish gave the fire pit a clean, like-new appearance without looking overly shiny or artificial. After several fires, the paint has held up well to the heat with no peeling or flaking. Proper prep definitely helps, but once applied, it provides a durable finish that stands up to outdoor conditions and high temperatures. If you’re looking to restore a fire pit, grill, or other high-heat metal surface, I would definitely recommend this product. Great coverage, easy application, and impressive durability.

As long as you follow proper baking procedures works great. The color is VERY matte! Be aware. But also nice. Held up well so far after 1 month.

This primer lays out nice even if you are not a professional painter. With good prep work you can make a great foundation for painting with this product

came on time